iec60598 1 axial force test

Brand Name:SHC

Model Number:SC-FFT

Place of Origin:China

...Axial Force Tester Technical parameters: Power 220V 50Hz The axial force 15N (bar weight), 30N (superimposed by a 15N vias weight onto the bar) Fixtures V-type fixture, front and back adjustable Holding specimen height range 0-250mm Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial...

Brand Name:PEGO

Model Number:PG-AFD

Place of Origin:China

...) for fluorescent lamps according to IEC60598-1 clause 4.4.4. It is applied to assess the fixing device of lamhpolder should have adequate mechanical strength so as to withstand rough handling as may be expected in normal use. The test should be checked by

Brand Name:Sinuo

Model Number:SN9926

Place of Origin:China

... to IEC60598-1 clause 4.4.4 Product Overview For Fluorescent Lamp Holder Axial Force Test Device: It is applicable to axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time 1

Brand Name:kingpo

Place of Origin:china

IEC60598-1 clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester / Lighting and Luminaries Test Equipment Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-LHA1

...content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder shall not ...

Brand Name:KingPo

Place of Origin:China

...Testing Equipment Holder Axial Force Tester IEC 60598-1 clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial...

Brand Name:RUIJIA

Model Number:RJDW-y200

Place of Origin:CHINA

...(30min) ±0.1%FS/30min Zero Balance ±1%F.S Safe Overload 300%FS Output 0.5-1.0mV/V Theory Test XYZ Three Axial Force Type China Description multi axial force sensor RUIJIA concentrated on sensor field more than 15 years with rich experience . During the

Brand Name:Forsentek

Model Number:XYZ

Place of Origin:China

...force sensor 2kN Tri-axial force transducer 1kN Triaxial force sensor XYZ is featured with low profile design to measure X/Y/Z 3-axis force at the same time.Aluminum construction, compact size, light weight, competitive price. Suitable for test benches,force experiments and other force measurements where more than one directional force...

Brand Name:kerang

Model Number:HT-I29

Place of Origin:CHINA

...IEC60598-2-20 clause 20.11.2. Application:It is used for testing the string lights which can not make all of the metal intertexture or other metal decorating parts charged. Test sample:String lights. Feature:It shall not be possible to touch live parts with this probe when the probe is applied in any position of the lamp which is installed with the chain with a force...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:ZL

Model Number:ZL-1014

Place of Origin:CHINA

..., IEC60065:16.5, IEC60598:5.2.11, etc. It is used to evaluate the power cord and is intended to be permanently connected with flexible cord. The power cords such as household appliances and medical ...

Brand Name:YUYANG

Model Number:YYE001-225

Place of Origin:China

...Testing Room Product Description: The hot air drying oven uses steam or electricity as the heat source, heats the air by heat exchange and uses an axial flow fan as the driving force to reduce the moisture content in the hot air. The hot air drying oven uses steam or electricity as the heat source, heats the air through heat exchange and uses an axial flow fan as the driving force

Brand Name:ASLI

Model Number:ES-6

Place of Origin:China

...Test Machine with 1Hz and 75mm Displacement STANDARD SPECIFICATIONS Item Description Sine Force 5.88KN Shock Force 11.76KN Frequency Range 5~3000 Hz Displacement 51 mm Max. Velocity 2m/s Max. Acceleration 981 m/s² (without loading) Armature Diameter 200 mm Permitted Load Torque >300 N•m Effective Armature Mass 6 kg Max. Load Capacity 100kg Magnetic Leakage ≤1 mT Axial...

Place of Origin:Guangdong, China

Brand Name:HAIDA

Model Number:EDM-3000/VSA-H323A

...Testing System Product Description PERFORMANCE DATA SHEET Shaker (Model# EDM-2000) Sine force (peak) 30kN Shock force (peak) 60 kN Frequency range 5~2,600 Hz Displacement (continuous) 100 mm Max. Velocity 1.8 m/s Max. Acceleration 75 G Armature Diameter 445 mm 1st order resonant frequency 2,400 Hz Allowable eccentric moment >500 Nxm Armature weight 40 kg HE/ST screw dimension M10 (metric) Axial...

Brand Name:HUATEC

Model Number:HGS-10A

Place of Origin:Beijing

Digital Tesla Meter Gauss Meter Field Strength Meter for Magnetic Particle Inspection HGS-10A Principle of Hall Effect When placing the semiconductor carrying current in the magnetic field axial to the current direction, the semiconductor will generate ...

Place of Origin:China

Brand Name:Wellmedlab

Model Number:ZD1962-T

...Testing Medical Equipment and Technology for medical device manufacturers and governmental quality department Specification: The tester is based on PLC controls and adopts a 5.7 inch color touch screen to show menus, operators can use touch keys to choose nomical capacity of syringe or nominal outside diameter of needle as per product specification . Axial force...

Brand Name:Jianqiao

Model Number:JQW-702-450

Place of Origin:China

...Test Table has large thrust force , strong carrying capacity and high cooling efficiency. Tri-axial sinusoidal vibration tests, broadband random vibration tests, and classical shock test like (half sine wave , trapezoidal wave , post-peak wave ) pulse and shock response spectrum tests can be performed separately. The climate chamber can be configured to complete a multi-environment comprehensive test

Brand Name:Gold

Model Number:EN

Place of Origin:Chongqing, China

High Strain Pile Testing Equipment Principles Of High Strain Testing: The basic principle of high strain testing is to apply an impact force to the axial hysteresis of the pile top to generate sufficient penetration of the pile, and measure the response...

Brand Name:SAMYON

Model Number:SLPT

Place of Origin:CN

... testing will take longer time with different loading grade. So it can check the displacement under the different loading force through the high precision displacement gauge. The systemcan be used for the Static Axial Compressive Load testing, and also can

Brand Name:LABTONE

Model Number:ET55

Place of Origin:Dongguang, China

...Test Systems For Micro Parts Vibration Testing​ Specifications: ET55 Model ET55 Frequency 5-5000Hz Max Exiting Force 55Kg.f(550N) Max. Displacement 19mmp-p Max. Acceleration 30G(300m/s2) Max. Velocity 1.22m/s Payload 20KG Armature Mass 1.8KG Armature Diameter φ120mm Cooling Method Air Cooling by inner axial