iec60884 socket outlet torque balance test apparatus

Brand Name:SHC

Model Number:SC-NJ01

Place of Origin:China

IEC60884 Plug and Socket Outlet Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/Equipment is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus...

Brand Name:kingpo

Model Number:KP-LJ2

Place of Origin:china

... apparatus as shown in IEC60065 Figure 11. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus pivots about a horizontal axis through

Brand Name:PEGO GROUP

Model Number:PG-LSA

Place of Origin:China

IEC60884-1 Figure 13 Socket-Outlet Lateral Strain Test Apparatus 1. Introduction This device is for checking the resistance to lateral strain for socket-outlet according to IEC60884-1 clause 13.14 / figure 13 and VDE0620, It is apply to test whether the socket-outlets having rating up to and including 16A and 250V will cause any damage in the standard sense when they are subjected to lateral stress by an appliance that is inserted into the socket

Brand Name:Sinuo

Model Number:SN1014

Place of Origin:China

...Socket-Outlets Mechanical Strength Test Apparatus Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.3, fig 19. IEC60884-1:2006 "Plugs and socket-outlets for household and similar purposes- Part1:General requirements" clause 24.9 and figure 29. GB2099.1-2008 "Plugs and socket-outlets

Brand Name:HongCe

Model Number:HC9908

Place of Origin:China

Iec60884 Clause 14.23.2 Socket -Outlet Torque Tester Product information The tester is conforms to IEC 60884-1 2013 clause 14.23.2, IEC 60335-1 clause 22.3, IEC60065 clause 15.4.1 and figure 11 and so on . It is used to test the strain force of insertion. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets...

Brand Name:KINGPO

Place of Origin:China

.... A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. This device has the advantages of good sensitivity, easy adjustment, simple operation and beautiful appearance.

Brand Name:Sinuo

Model Number:SN2120

Place of Origin:China

...Socket-outlets Cord Retention Test Apparatus Standard: IEC60884-1 clause 23.2 figure 20. Application: It is used for testing rewirable plugs and rewirable portable socket-outlets shall be provided with a cord anchorage such that the conductors are relieved from strain, including twisting, where they are connected to the terminals and that their covering is protected from abrasion. Test...

Brand Name:HJ

Model Number:HC9908

Place of Origin:China

...Socket Test Equipment Plug Insert Torque Balance fixed socket-outlet, plug-in equipment Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 14.23.2, IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 22.3, IEC 60065 ‘Audio, video and similar electronic apparatus...

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

...testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots about a horizontal axis through the center lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet...

Place of Origin:China

Brand Name:KeRang

Apparatus for testing cord retention CR-1 Product details: This device conforms to the standard requirement of IEC60884 figure 20. It is for testing cord retention is for check the effectiveness of the retention of the cable of the cord anchorage. The cord...