iec60950 1 scratched test pin

Brand Name:Pego Group

Model Number:PG-HSP

Place of Origin:China

...Scratch Test Pin Made of Hardened Steel 1. Introduction Hardened steel Pin is designed according to IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. It is applied to do scratch test for accessible parts of solid insulation of household appliance and printed circuit boards, to ensure the material has sufficient strength to prevent penetration by sharp implements. The hardened steel pin...

Brand Name:kerang

Model Number:HT-I34

Place of Origin:CHINA

...:Home appliance fixed insulation accessible part and coated printed board. Feature:Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the

Brand Name:kingpo

Model Number:KP-AR25

Place of Origin:china

...five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests. The scratches are made by means of a hardened steel pin, the end of which has the form of a

Brand Name:HongCe

Model Number:HT-I09

Place of Origin:China

IEC60950-1 Test Pin For Information Technology Equipment Test , Tip Diameter 3mm IEC60950-1 clause 2.1.1.1 Access to energized parts c) A test with the test pin, Figure 2B, which shall not contact bare parts at HAZARDOUS VOLTAGES when applied to openings...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-13

IEC60065 IEC61032 short test pin, test pin 13, test rod Product Description IEC60065 IEC61032 short test pin, test pin 13, test rod Short test pin meets the standard requirements of IEC60132 IEC60065 IEC60335 IEC60950. The Test Probe is a wide range of ...

Brand Name:HJ

Model Number:HT-I09

Place of Origin:China

...Test Pin Probe HT-I09 IEC61032 Figure 9 Test Probe13 Metal Pin Tip Diameter Ф3 Standard of Short Test Pin Probe: IEC61032 figure 9 Test Probe 13, IEC60950 figure 2B, IEC60335 and IEC60065. Application of Short Test Pin Probe: This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Feature of Short Test Pin Probe: It can be used for enclosure protection test...

Brand Name:JLX

Model Number:LX-R03

Place of Origin:Made in China

...standard requirement of IEC60335-1 clause 21. Test method: Make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of

Brand Name:Sinuo

Model Number:SN1106

Place of Origin:China

IEC60950-1 Insulation Surface Abrasion Resistance Testing Equipment Product overview: The insulation surface abrasion resistance test appratus is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard requirement of IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. This tester adopts PLC + touch screen control system, stepper motor drive. Scratch

Brand Name:KingPo

Place of Origin:China

...Testing Probe Pin For Scratch Resistance Test IEC60335-1 Clause 21 Scratched Pin For Scratch Resistance Test Of The Electrical Solid Insulation Surface Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the angle between the pin...

Brand Name:ZL

Model Number:ZL-3423

Place of Origin:China

....6.6. It is a strength test used to detect the solid insulation of household and similar electrical appliances against puncture by sharp tools. Technical performance: The scratch resistance test of the coating uses hardened steel needles for scratches. The

Brand Name:SHC

Model Number:SC-ASRT

Place of Origin:China

...Testing Machine IEC60335-1 clause 21.2 Product information: The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard requirement of IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. Technical parameters: Input voltage 230V/50Hz control system PLC + touch screen Drive mode stepper motor-driven Scratching...

Brand Name:Stron

Place of Origin:Hunan

15Watt Desktop POE Power Supply 1000M + (4,5)pins; - (7,8) pins Electricity Supply ■Features : ·Universal AC input / Full range ·1000M Ethernet ports support ·+(4,5)pins; -(7,8)pins ·Forced the power into Ethernet ports ·Protections: Short circuit / ...

Brand Name:YUYANG

Model Number:YY054

Place of Origin:China

...Test The Scratch Resistance Of Knitted Fabric Description: Bean Bag Snag Tester. To determine the snagging and picking characteristics of knitted fabrics by tumbling fabrics pillows containing a weighted bean bag within two separate test cylinders provided with eight pinned...

Brand Name:TGKELL

Model Number:TGSS8095

Place of Origin:China

...Pin Normal plating and vacccm plating Anti-scratched Acid proof Rust proof Anti-oxidation Auto Buckle Widely Used For Making Man and Lady'S Belt and Garments Gold Anti-brass Black Nickle Free 28mm 30mm 35mm 38mm TESTING ITEM TESTING RESULT TESTING METHOD Content 100% Metal/Alloy/Alu/...

Brand Name:CPT

Model Number:CLAA090NA06CW

Place of Origin:Japan,Korea

...LCD display for 6 years. 2. Q:What’s the quality of your products? A: In visual inspection, we will make sure no damage, no scratches ,no dusty ,no flaws. And in function inspection, we make sure all functions are 100% tested ok. 3. Q: What is your after

Place of Origin:China

Brand Name:simsukian

Model Number:SK01G-1

...IEC60950/EN60950/UL60950/UL60335 Hold up times: 20ms Min Pin type VDE/UL/BS/SAA/KC/PSE/CCC Efficeny: ERP/CEC-V Cooling mode: Natural cooling MTBF 50,000 hours Theusb chargermust be with 1.materialtest with ROHS machine,2.burn-in test for 4 hours,3.droptestfrom

Brand Name:YIMU

Model Number:CM200

Place of Origin:Shanghai

... Includes cap demand sensor to start and stop the cap feeder. • Quick change over, since parts are pin guided so no tweaking is required. Vibratory cap feeder features • Aluminum casting with polyurethane liner to minimizes cap marking-scratching •