iec61032 figure 4 test rod probe

Brand Name:SHC

Model Number:SC-F3C

Place of Origin:China

... C Test rod probe C with force 1 Ф2.5+0.05 0 Ф2.5+0.05 0 2 SФ35±0.2 SФ35±0.2 3 Ф10 Ф10 4 100±0.2 100±0.2 5 100 ---- 6 ---- 3N force 14 IEC61032.1 IEC60529 Product information: This probe conforms to standard requirements of IEC61032 test probe C and

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I03

... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a tool. Customizable: It can be used for anti-electric shock test when equipped with amphenol connector.

Brand Name:HJ

Model Number:HT-I16

Place of Origin:China

IEC61032 Figure 16 Test Finger Probe Test Thorn Probe With 80 Handle Length Standard: IEC61032 Protection of persons and equipment by enclosures - Probes for verification figure 16 test probe 41. IEC60335 Household and similar electrical appliances - Safety - Part 1: General requirements. Application: This probe is intended to verify the protection against access to glowing heating elements. Test Finger Probe Test...

Brand Name:kingpo

Model Number:IEC61032 figure 7

Place of Origin:china

... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box and carton box, careful and tight package, make sure the ...

Brand Name:KingPo

Place of Origin:China

... rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a tool. Confirm to standards: IEC 60529 IP3X; EN 60529 IP3X; IEC 61032-1 Figure 3; IEC 60065 and so on.

Brand Name:kerang

Model Number:HT-I06

Place of Origin:CHINA

...5mm or greater. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:Steel ball, rigid test. Parameters: Model HT-I06 HT-I06T Name Test probe 2 steel ball Test probe 2 steel ball with force Steel ball diameter SФ12.5+0.2 0 SФ12.5

Place of Origin:China

Brand Name:Julixing

Model Number:LX-3D

Basic Introduction: Used to verify protection against access to hazardous parts by use of a tool through holes which give access to pre-set controls. Meets IEC, EN, UL and CSA Standards including IEC 1010, EN 61010-1, U- 3101-1, UL 3111-1 and CSA 1010...

Brand Name:Sinuo

Model Number:SN2210-4

Place of Origin:China

...Test Rod Probe D Test Probe With Alligator Clip Product overview: This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire. Applicable standard This probe conforms to the standard requirement of IEC61032 figure 4 test probe...

Brand Name:PEGO

Model Number:PG-TP32

Place of Origin:China

IEC61032 Test Probe 32 Test Rod with Third - Lab Calibration Certificate Introduction: It is designed according to IEC61032 figure 15. This rod is intended to verify the protection provided by fan guards access to hazardous mechanical parts, equip with nylon handle. Specification: Diameter of the rod 25mm Material insulating material and metal Picture: Probe List: Probes and application Probe...

Brand Name:Lonroy

Place of Origin:China

.... It is used for protective inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,

Place of Origin:China

Brand Name:BONAD

Model Number:BND-13

... IEC61032 short test pin, test pin 13, test rod Product Description IEC60065 IEC61032 short test pin, test pin 13, test rod Short test pin meets the standard requirements of IEC60132 IEC60065 IEC60335 IEC60950. The Test Probe is a wide range of probes to ...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test

Brand Name:szcx

Model Number:CX-T3C

Place of Origin:china

...Test Probe C ( Test Probe C ) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Rod length: 100 mm 2. Rod diameter: 2.5 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 Figure 3 (the Test