imo flame vertical apparatus

Brand Name:DAXIAN

Model Number:DX9030

Place of Origin:China

ISO 5658 Surface Spread of Flame (Rail & Marine) Test Product Introduction: This equipment radiates heat through a gas radiant panel and uses an imported calorimeter to calibrate the radiant heat and ignites the sample through a mixed gas burner to test...

Brand Name:HOOHA

Model Number:ZY6263-PC IMO

Place of Origin:China

ASTM E1317 IMO Flame Spread Tester Building Material Flammability Test Apparatus Scope of application: 1.1 applicable to buildings and transportation tools (such as ships, trains, etc.), the exposed surface using flat single material, the surface ...

Brand Name:VOUCH

Model Number:5600

Place of Origin:CHINA

... the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test time for the temperature of the standard copper block to increase from

Brand Name:PEGO Group

Model Number:HVR-4H

Place of Origin:China

... test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting equipment, low-voltage apparatus,

Brand Name:HongCe

Model Number:HVF-3

Place of Origin:China

IEC60659 Horizontal Vertical Flame Test Apparatus Flammability Testing Equipment UL 94 With 500W Flame Description of Flammability Testing Equipment: The Horizontal & Vertical Flame Chamber is an essential flammability test equipment intended to determine...

Brand Name:Sinuo

Model Number:SN7711

Place of Origin:China

...Vertical/Horizontal Wire Flame Test Apparatus Cables and Wires Flame Resistance Test Product information: This flammability test chamber meets the requirements of UL1581 and UL94 flame test. The effects of flames in the early stages of fire on electrical and electronic products are used to assess the degree of fire hazard through simulation techniques. It is mainly used for 1080 VW-1 (vertical-specimen) flame...

Place of Origin:China

Brand Name:KeRang

...vertical Flame Test Apparatus Standard:UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. Application:It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. It is mainly used in plastic and other non-metallic material sample, solid material. It is also applicable in the Horizontal, vertical...

Brand Name:GOLD

Model Number:GD-BS476-7

Place of Origin:China

... surface of the specimen of a product oriented in the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It provides data suitable for comparing the end-use performances of

Brand Name:Delta

Model Number:IMO

Place of Origin:Chongqing, China

... materials, and ship materials. IMO ISO5658-2, ASTM E1317 IMO Flame Spread Tester measures the flame spread speed, ignition heat and total heat release according to distance and CEF (critical heat radiation flow). This test ...

Brand Name:YUYANG

Model Number:YY109

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After recording time of ignition and extinguishment at each distance,we can

Brand Name:GC

Model Number:GC-UL94

Place of Origin:China

...flammability of materials used in electrical and electronic devices. It is designed to simulate the conditions of a small flame ignition source that may occur in these devices. The machine consists of a combustion chamber with a burner at the bottom, a

Brand Name:KINGPO

Place of Origin:Mainland China

...Flame Resistance Test Apparatus Product information: This apparatus conforms to the standard requirement of IEC60320-1-2. It is applicable for vertical combustion test of the single electric wire or cable. It is used to measure the combustion characteristic of insulation. The burning time can be preset according to the specimen. It is convenient to adjust the flame...

Brand Name:SKYLINE

Model Number:SL-SE03

Place of Origin:China

Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire caused by an interior fault such as leakage current in cable & wire and the like. It meets the ...

Brand Name:HTI

Model Number:HTB-015

Place of Origin:Guangdong,China(Mainland)

... to the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS 476-7 is mainly used for the determination of the extension of the flame which on the exposed surface of the wall and

Brand Name:Kinte

Model Number:WH-8903A (ZY-1)

Place of Origin:Guangdong,China (Mainland)

..., etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is assessed using simulation techniques.

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument,

Brand Name:AI

Model Number:NFT

Place of Origin:CHINA

Needle Flame Test Apparatus by IEC60695-11-5 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household appliances, ...

Brand Name:YUYANG

Model Number:YYF056

Place of Origin:China

..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual ...

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Test sample: It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating ...

Place of Origin:China

Brand Name:CHENGFENG

The needle flame tester is suitable for testing the flame retardant performance of electronic components, electrical devices, mechanical parts, injection molded parts and other electrical products. This machine simulates the small flame generated inside...