intelligent flow rate tester

Brand Name:HongCe

Model Number:hcrtb-002

Place of Origin:CHINA

... acquisition architecture, and vector frequency conversion current stabilization technology. This enables fully automatic and accurate detection of gas relay flow rate, volume,

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

... flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate ratio FRR and other functions, this machine high precision temperature control, key parts

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R804-1

...Flow Rate Tester Purpose: Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate...

Brand Name:Delta

Model Number:MFR

Place of Origin:China

... Volume Flow Rate ASTM D1238 Melt Flow Rate Tester by Extrusion Plastometer Introduction: MFR ASTM D1238 Melt Flow Rate Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133; MFR ASTM D1238 Melt Flow Rate Tester is suitable for testing...

Brand Name:HiYi

Model Number:ZR-3061

Place of Origin:China

ZR-3061 Flue Gas Flow Rate Tester OVERVIEW ZR-3061 Flue gas flow rate tester is a handheld portable instrument used to measure the flue gas flow rate, flow, dynamic pressure, static pressure, temperature and other parameters of stationary pollution source...

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

...flow index melt flow rate tester Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

Melt Flow Rate Tester ,Melt Indexer Application : This tester is used for mensurating melt flow rate when the viscous flow state MFR value, it applies to the polycarbonate, higher temperature of aromatic sulfone, fluorine plastic, nylon and other ...

Place of Origin:China

Brand Name:GC

Model Number:GC-MI-BPV

...n various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also, it is appropriate for

Brand Name:AI

Model Number:AIC41098

Place of Origin:China

Product description: Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber...

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

ASTM D1238 ISO 1133 Electric Melt Flow Rate Tester of PP PE Material MFR/MVR Description: Melt Flow Index Tester is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, ...

Place of Origin:China

Brand Name:Wellmedlab

Model Number:YL-B

... according to national standards and specially used for testing flow rate of medical devices. Applicable to infusion set, transfusion set, infusion needle, catheters, filters for anesthesia,etc. Description: Range of pressure ...

Brand Name:HIGHLAND

Model Number:MYHT-1-5

Place of Origin:China Dezhou

Product Description: The MYHT-1-5 Hydraulic Flow Meters is the perfect tool for measuring the flow of hydraulic fluid in snow cars. With a maximum pressure of 420 Bar, this device is able to handle the high pressures required for efficient snow car ...

Brand Name:JHH

Model Number:XNR-400D

Place of Origin:Beijing, China

...Flow Rate Analysis Melt Flow Index Tester for High-Temperature Summary: Electronic Loading Plastic Material Flow Rate Analysis Melt Flow Index Tester for High-Temperature is a high-precision melt flow tester used to test various plastics and resins in a viscous state through a certain temperature and load. The module and melt flow rate...

Brand Name:REFOND

Model Number:RF4008AF

Place of Origin:Shen Zhen, China (Mainland)

...Rate Tester AATCC 200 Order Information RF4008AF Drying Rate Tester Main Machine + Software RF4008AF/1 Drying Rate Tester Software RF4008AF/2 Computer RF4008AF/3 Sample Holder RF4008AF/4 USB Cable Company Information REFOND Equipment Co., Ltd. is focusing on the development, manufacturing and sales of high-quality textile testing equipment and testing consumables. Product Instruction Drying Rate Tester...

Brand Name:BonninTech

Model Number:XNR-400B/D

Place of Origin:Wuhan, China

...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of ...

Brand Name:Lonroy

Model Number:LR-1001-A

Place of Origin:China

... for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. 3. Product Character 1

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.

Brand Name:Great Win

Model Number:GW-108

Place of Origin:China

...ºC Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR ...

Brand Name:HUST TONY INSTRUMENTS

Model Number:HTF-036

Place of Origin:Made In China

...Rate Tester-Heated Plate Method AATCC 201 Drying Rate Tester-Heated Plate Method,a fully automated testing machine, is based on the requirement of US AATCC201 testing standard, specially developed an automatic fabric drying rate tester. Drying Rate Tester, equipped with high precision hot-wire anemometer, IR thermocouple, PT100 temperature sensor, precision water dripping system, precision air flow control system and the air flow

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it