lab hot wire ignition test machine

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition test...

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...Wire Ignitability Test Machine Overview: The glow wire test is to test the stability of electronic and electrical products during operation. The glow wire itself is actually a resistance wire loop with a fixed specification. During the test, it must be heated to a specified temperature by electricity, so that the tip of the glow wire contacts the sample for a standard time, and then observe and measure its state. The test...

Place of Origin:China

Brand Name:HongCe

Model Number:HWI-1

Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Hot-wire coil ignition test

Brand Name:HJ

Model Number:HWI-1

Place of Origin:China

...Testing Equipment Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire...

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

...Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview Application: Suitable for fire hazard tests...

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Place of Origin:China

Brand Name:KeRang

... test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Test sample:Information technology equipment, low voltage switch and control equipment parts.

Brand Name:Lonroy

Model Number:LR-Q031

Place of Origin:China

LR-Q031 Touchscreen Wire Bending Testing Machine Cable Flexing Tester 1. Product Description The wire bending and swaying testing machine is also known as the wire bending testing machine or the swaying testing machine. This testing machine complies wit...

Brand Name:SKYLINE

Model Number:SL-BST016

Place of Origin:China

Wire Lab Testing Equipment Automatic Plug Wire Swing Durability Tester Wire bending testing machine is suitable for the plug pinouts, power cord, USB cable, headphone cable, audio cable, headphone cable and other products wire rod bending tests or swing test. The specimen is fixed at fixture, and adding certain load, test...

Brand Name:KEJIAN

Model Number:KJ-1066B

Place of Origin:China

...Lab Material Tensile Strength Testing Machine With One Year Warranty For Rubber Design standard: ASTM D903, GB/T2790/2791/2792, CNS11888, JIS K6854, PSTC7 Product Application 30T Lab Material Tensile Strength Testing Machine is widely used in controlling the quality; Rubber & Plastics; metallurgical iron and steel; manufacturing machinery; electronic equipment; automobile production; textile fiber; wire...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... of materials is crucial for ensuring the safety and integrity of structures. The Building Material Ignitability Test Machine with Single Flame Source is a cutting-edge device that offers precise and reliable testing capabilities, enabling manufacturers,

Brand Name:SHC

Model Number:SC-HWI

Place of Origin:China

Household Appliance Materials Hot Wire Ignition Independent Exhaust Tester Parameters: Working voltage 220V/50Hz Control operation mode Electrical control, button operation Heating coil ф0.5mm,Ni80/Cr20,length:250mm±5mm ,cold resistance 5.28Ω/m Anneal ...

Brand Name:ASLI

Model Number:AS-PC-5000

Place of Origin:CHINA

5 tons tension testing machine wire tension testing machine special material tension stripping machine manufacturers custom Specification Model AS-PC- Volume Capacity (Kg) 50,100,200,500,1000,2000,5000,10000,20000 Load Accuracy 0.5% Load Resolution 1/100,...

Brand Name:AI

Model Number:GWFI

Place of Origin:CHINA

...Wire Flammability Index Test Machine Introduction: This Glow Wire Flammability Index Test Machine is designed according to IEC60695-2-10: 2000 standard "glowing filament test method". It is applicable to electrical and electronic products, household appliances and materials fire hazard testing, simulate burning elements or overload resistance and the like heat or ignition source thermal stress caused by a short time. Glow Wire...

Brand Name:PTE

Model Number:torsion test equipment

Place of Origin:Jinan

torsion testing machine lab manual torsion testing machine Applications: This torsion testing machine is designed for torsion test to metal materials, non-metallic materials, composite materials and components as National and global standards “metal at ...

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:China

... to spread fire within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60IEC60695-2-20 Hot Wire Coil Ignition Test Apparatus for Solid Electrical Insulating Materials Overview: Hot wire ignition test apparatus conforms to IEC60695-2-20-1995, ASTMD3874-1997, IEC60950-1999, UL746A-2000, UL746C-2000, IEC829-1998. This ...