lc dr4 400g osfp transceiver

Brand Name:Top-Trans

Model Number:TOSFP-400G-DR4+

Place of Origin:China

... at 50Gb/s each, for a total of the bandwidth of 400Gb/s. This post will give an introduction of 400G OSFP transceiver types, the fiber connections, and some QAs about OSFP. Parameters Fiber Type SMF Connector LC Tx EML CWDM Rx Pin Power Consumption (W

Brand Name:Trixon

Model Number:TOS-Q4M5-31DCM

Place of Origin:China

Features: • Hot-pluggable OSFP form facto • EML transmitter and PIN PD receiver • Support 425Gb/s aggregate bit rate • Support both Ethernet and InfiniBand NDR • Compliant with IEEE 802.3-2022: - 400GBASE-DR4 optical interface • Compliant with IEEE 802.3ck...

Brand Name:HILINK

Model Number:HL- 400G - DD - DR4

Place of Origin:Guangdong, China

400G QSFP-DD DR4 Optical Transceiver with MTP/MPO-12 Connector for 5G Data Center PRODUCT FEATURES • Compliant to QSFP-DD MSA • Parallel 4 Optical Lanes • IEEE 802.3bs 400GBASE-DR4 Specification compliant • Maximum power consumption 12W APPLICATIONS • 400G...

Brand Name:own

Model Number:400G OSFP DR4

Place of Origin:China

400G OSFP DR4 Optical Transceiver — CC-OSFP04DR4-12C Deliver high-performance data center connectivity with our optical transceiver module, designed for 400 Gigabit Ethernet applications. This optical module supports up to 500m reach on single-mode fiber, features an MPO-12 APC connector, and complies with CMIS 5.0 for advanced management. Ideal for high-density networking environments requiring reliable, high-speed transmission. 400G OSFP DR4

Brand Name:comelink

Model Number:400G OSFP DR4

Place of Origin:China

..., up to 500m over parallel single-mode fiber. It is compliant with OSFP MSA, CMIS 4.0 I2C Interface and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel 1310nm optical ...

Brand Name:LINK-PP

Model Number:LQ4-400G-DR4

Place of Origin:Guangdong,China

LINK-PP LQ4-400G-DR4 QSFP-DD DR4 SMF Optical Transceiver Module (400G,1310nm,500m) QSFP-DD 400GBASE-DR4 silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active...

Brand Name:OPTICKING

Model Number:KQSFC0-DR31SM10C

Place of Origin:China

400G QSFP DD DR4 Transceiver 10km 1310nm Optical Module Product Feature 1. Compliant with IEEE802.3bs standard: 400GAUI-8 electrical interface 2. Compliant with IEEE 802.3cu standards: 4x 100GBASE-LR1 optical interface 3. Compliant with QSFP-DD MSA HW Rev...

Brand Name:Guanglian

Model Number:OPTR-DS31P-C

Place of Origin:Made in China

OPTR-DS31P-C is a transceiver module designed for 500m optical communication applications, and it is compliant withQSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The 425 Gigabit signal is carried over four parallel lanes by one wavelength per ...

Brand Name:Cisco

Model Number:T-GQ4CNS-N00

Place of Origin:China

Product Description This product is a 400Gb/s Octal Small Form-factor Pluggable (OSFP) optical module designed for 2km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of CWDM optical ...

Brand Name:TAKFLY

Model Number:MPO/MTP Patch Cord

Place of Origin:Shenzhen, China

... and reduce cable management troubles. It is optimized for 40G QSFP+ PLR4, 100G QSFP28 PSM4, 400G OSFP DR4/XDR4 and 400G QSFP-DD DR4/XDR4 optics direct connection and high-density data center applications. Fiber Optic MTP/MPO-LC Fiber Patchcord - Features:

Brand Name:E-link

Model Number:LNK-OSFP-400G-LR8-10

Place of Origin:China

... single mode fiber (SMF) with duplex LC connectors. The 400 Gigabit Ethernet signal is carried over eight wavelengths. Multiplexing and demultiplexing of the eight wavelengths are managed within the device. SFP Fiber Transceivers Advantages Compliant with

Brand Name:UNIFIBER-OEM

Place of Origin:CHINA

...LC Harnesses Cables MPO/MTP harnesses Breakout cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With US Conec MTP connectors and Corning SMF-28 ultra optical fiber, it is optimized for 40G QSFP+ PLR4 to 10G SFP+ LR, 400G OSFP/QSFP-DD DR4 to 100G QSFP DR and 400G OSFP...

Categories:MTP MPO Cable

Country/Region:china

... saving. The Cable assemblies are used in 40G QSFP+ PLR4 to 10G SFP+ LR, 400G OSFP/QSFP-DD DR4 to 100G QSFP28 DR and 400G OSFP/QSFP-DD XDR4 to 100G QSFP28 FR optics direct connection and high-density data center applications. Fiber ...

Brand Name:E-link

Model Number:LNK-QDD-400G-DR4-2

Place of Origin:China

Fiber Optic Module 400GBASE-DR4 QSFP-DD 1310nm 2KM Transceiver MPO12 Connector 400G QSFP Transceiver Advantages ► Compliant with IEEE802.3bs standard: - 400GAUI-8 electrical interface ► Compliant with IEEE 802.3cu standards: - 4x 100GBASE-FR1 optical ...

Categories:Fiber Optic Transceiver Modules

Country/Region:china

Transceiver Module

Brand Name:CY COM

Model Number:OSFP 800G to QSFP112 2 x 400G AOC

Place of Origin:Shenzhen,China

OSFP 800G to QSFP112 2 x 400G AOC for Digital diagnostic functions Function Descriptions OM3881SX10x is a 5-40 m active optical cable with one OSFP 800G to two QSFP112 400G connectors. It integrates 16 data channels in each direction with 8 x 53.125GBd...

Brand Name:Ruijie

Model Number:400G-Q112-DR4-L

Ruijie 400G-Q112-DR4-L High-Speed 400Gbps Low Power QSFP-DD Optical Module For Data Centers The Ruijie 400G-Q112-DR4-L is a high-performance 400G QSFP-DD optical transceiver designed for next-generation data centers, cloud computing, and AI/ML applications...

Brand Name:OMC or OEM

Model Number:2 / 4 / 8 Fibers CS UPC SM

Place of Origin:China

... 802.3.bs- 2017), but currently there are parallel and WDM transceiver structures for 200/400G QSFP-DD/OSFP, each needing 8 optical lanes. Due to the QSFP interface, 2X duplex LC connectors cannot fit in the QSFP-DD/OSFP form factor. There- fore, network

Brand Name:Geehe

Model Number:GH-MPO-003

Place of Origin:Wuhan China

...OM4 3.0mm, 3.6mm Round Cable 400G 16F MPO Pre-terminated Jumper Cable Basic Information: The OSFP-SR8 or MPO jumper with the 16F MPO connector is used for the connection between the OSFP-SR8 400G optical transceiver module in the data center. It can fully ...

Brand Name:OEM

Model Number:SN/PC-SN/PC-2F-A2-2.0-L-1M

Place of Origin:CHINA

... accommodate 4 duplex connectors to provide an efficient and reliable replacement for MPO connectors in quad fiber applications and are optimized to support next-generation 400G QSFP-DD and OSFP transceivers. Features and