low compressive strength tci drill bit

Brand Name:MIROC

Model Number:6 3/4"(171 mm)

Place of Origin:Hebei, China (Mainland)

...used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with ...

Brand Name:MIROC

Model Number:Tricone Drill Bit

Place of Origin:China (Mainland)

Low Compressive Strength 6 3/4" IADC635 Tricone Drill Bit TCI Roller Rock Bits TCI Tricone bits offer a variety of carbide inserts such as spherically shaped inserts for very hard rock or conically shaped inserts for softer rock. The number of rows of inserts is directly related to the type of application and the size of hole to be drilled...

Brand Name:JSBIT

Model Number:241mm iadc 537 tricone drill bit

Place of Origin:CANGZHOU Heibei province China

TCI Bit Factory Wholesale 241mm Iadc 537 Tricone Drill Bit JSBIT tricone bits factory offers all kinds of tricone drill bits. Tricone bits are available in new and used tricone bits , steel tooth and tungsten carbide insert, in sizes from 37/8" to 36", for...

Brand Name:Tianying

Model Number:IADC635

Place of Origin:CHINA

...TCI Tricone Bit For Soft-Medium Formation Exploration Click here for catalogueTCI DRILL BIT.pdf IADC 6 SERIES DRILL BITS Medium to Medium-Hard Formation Application: For use in moderately abrasive consolidated formations with compressive strength ranging between 140 – 485 Mpa such as hard limestone, quartzite, granodiorite, and medium grade metamorphic formations Cutting structure: These bits...

Brand Name:Pangolin

Place of Origin:HeBei China

... into two types: cutting machines and TCI cutting machines, used for compressive strength of various formations. It is used for non-excavation horizontal directional drilling and vertical drilling reaming of petroleum, natural gas, petrochemical, sewage,

Brand Name:ROSCHEN

Model Number:14 3/4"

Place of Origin:China

... Available Shirttail Protection Available RPM (r/min) 180~60 WOB(KN) 112~318 Application Soft formation with low compressive strength ,and high drill ability, such as mudstone, gypsum,

Brand Name:FLRT

Model Number:8 1/2 FA126

Place of Origin:China

...Bit , Sealed Friction Bearing , TRC Bit , Water Well Drilling PRODUCT SPECIFICATIONS Bit Size: 8 1/2inch(215.9mm) IADC: 1 2 6 SERIES: FA Tooth type: (ST)Tungsten Carbide Insert Connection: 4 1/2inch API REG PIN Nozzle: three jet(side) nozzles Bit Weight: 38kgs RECOMMENDED ROCK FORMATIONS Adapted to be used in very soft to medium soft with low compressive strength...

Place of Origin:China

Brand Name:Defy

... High-precision metal seal. 3. Locking roller ball, to adapt to high-speed. 4. The use of high strength high toughness carbide teeth, 5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock. 6. Cone bit to adapt to

Brand Name:ENG

Model Number:637G

Place of Origin:China

...CONE DRILL BITS Product Specifications Diameter 6" (125.4mm) Bearing Type Rubber sealed Drilling cycle type Mud circulation Connection thread type 3 1/2 reg pin Operation Parameters Formation Hard formations with high compressive strength, such as ...

Place of Origin:Hebei,China

... structure can improve the sealing performance. Pressure compensation system and advanced grease can greatly improve lubrication reliability. 2. Product application This type of TCI tri-cone bit: can withstand high drilling pressure in

Brand Name:Super Diamond

Model Number:PR40

Place of Origin:China

... drilling produces samples of rock cuttings rather than a sample of rock core. The down-hole hammer is powered by compressed air, which also acts as the medium bringing the drill cuttings up to surface. It is mainly used in deep hole exploration and mining

Place of Origin:HeBei . China

High Quality Drills To Drill Water Wells/Steel Tooth Drill Bits Introduction The surface of the steel tooth drill bit is coated with a new wear-resistant alloy to enhance the wear resistance of the cutting teeth. The insert bit adopts high-quality hard ...

Brand Name:MING

Model Number:MH CIR130

Place of Origin:CHINA

...Low Air Pressure DTH Drill Bits Hammer For Short Micro Piles Product category: Down The Hole Hammer Connection thread: PIN2-3/8"REG BOX Working pressure(bar): 6-12 Hole range(mm): 130~175 Outer diameter: 112 Weight(KGS): 46kg CIR130 Low Air Pressure DTH Drill Bits Hammer - a revolutionary drilling tool specifically designed to optimize structural strength...

Brand Name:Steel Teeth sealed journal bearing bits

Model Number:mill tooth tricone bit

Place of Origin:Hebei,China

Product Description: 1. Sizes: 3 7/8'' to 36'' is available. 2. Application: Suitable for oil, natural gas, geothermal industrial and water well drilling, HDD projects, etc. 3. Unique steel tooth structure effectively improving the wearing resistance of ...

Brand Name:SOLLROC

Model Number:SC-IADC435-229 TCI Tricone bit

Place of Origin:China

...TCI Tricone bit mining drilling hole SC-IADC545-229 TCI Tricone bit Diameter: 9" (229mm) IADC code: 545 SOLLROC offers a variety of tricones, from sealed bearing button(TCI) bits to open bearing steel tooth bits in a wide range of sizes. Applications: For soft formation (Hardness F=9) with low compressive strength...

Brand Name:GLORYTEK

Model Number:9 7-8 IADC437

Place of Origin:China

...bit 9 7/8 IADC437 TCI tricone drill bit for rock drilling 1.Description: -The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit...

Brand Name:SANROCK

Model Number:Customized

Place of Origin:Zhejiang, China

..., construction engineering. Now there are eleven common types of tricone rock bits. Normal IADC: 437 Soft Formation TCI Tricone Bits: The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both

Place of Origin:hejian

Model Number:537 or as your inquire

...low compressive strength ,such as soft marl ,clay, unconsolidated sand-storm ,salt or hard shale,ect. 2)The world's latest sealing technology ,ensure the bearing is more effcient ,and more suitable for drilling at high rotary speed and high tem-perature working condition. 3)Bits bear is enhanced treatment ,and prolonging the bit working life,reducing the drilling cost. detailedinformation 1. Tricone bit...

Place of Origin:China

Brand Name:DZ

Model Number:DZ5 1/2"-17 1/2"

...: blue, golden or as customers' requirement. 6) Formation: soft, soft to medium hard, medium hard, hard, very hard TRICONE BIT SPECIFICATION BIT TYPE IADC CODE SUITABLE FROMATION WEIGHT ON BIT(KN/MM) ROTARY SPEED(R/MIN) DZ117 117 Low compressive strength,