lubricating grease leakage tester astm d1263

Brand Name:Shandong Shengtai Instruments Co., Ltd.

Model Number:SY0326

Place of Origin:CHINA

... into a modified front wheel hub and shaft assembly, allowing the hub and shaft to run for 360 ± 5 minutes under specified conditions. Measure the leakage of lubricating grease or oil, and pay attention to the surface condition of

Brand Name:Shengtai Instrument

Model Number:SY0326

Place of Origin:China

...Grease leakage tester is in strict accordance with the SH/T0326 standard design and manufacture, the instrument into the sample after modification of the front wheel hub and shaft assembly, so that the hub and shaft under the specified conditions a total of 360±5min operation. ASTM D1263 Determine the leakage of grease or oil, and observe the bearing surface condition at the end of the sample. ASTM D1263 Leakage Tendency Tester...

Brand Name:AI

Model Number:AIC-1263

Place of Origin:China

Introduction Load the sample into the modified front wheel hub and shaft assembly, and let the hub and shaft run for a total of 360±5 min under the specified conditions. Measure the leakage of grease or oil, and observe the condition of the bearing surface...

Brand Name:YUYANG

Model Number:DPT

Place of Origin:CHINA

...China GB/T 4929 Lubricating grease- Determination of Dropping Point and ASTM D566 Standard Test Method for Dropping Point of Lubricating Grease. I. Main technical features 1. The oil bath is composed of heat resistant beaker, heater and electric motor. The

Brand Name:SKYLINE

Model Number:SL-OA103

Place of Origin:CHINA

ASTM D217 Lubricating Grease Cone Penetration Meter Product Description Cone penetration tester, in accordance with the requirements of GB/T 4985, GB/T 4509, GB/T 269, ASTM D217, ASTM D1321 test methods, suitable for the determination of petroleum wax with a needle penetration not greater than 250, solid and semi-solid asphalt materials, grease...

Model Number:LR-O033

Place of Origin:China

Brand Name:Lonroy

ISO 2137 ASTM D217 Automatic Oil Needle Penetration Tetser Bitumen Grease Cone Penetrometer 1. Product Introduction Automatic Oil Penetrometer is designed and manufactured according to the relevant provisions of the national standard GB/T269-91 "Cone ...

Brand Name:SAMYON

Model Number:SY-260

Place of Origin:CN

... method specified in GB/T260. It is also suitable to determine the water content of lubricating grease according to the test method specified in GB/T 512 Test Method for Water Content of Lubricating Grease. Standard: ASTM D95-2005 Standard test method for

Brand Name:BOTO

Model Number:BT-90

Place of Origin:China

Introduction: Salt Spray Tester is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, ...