micro grain size solid carbide high feed end mill

Brand Name:Seego Carbide

Model Number:Solid Tungsten Carbide End Mills

Place of Origin:Hunan of China

Micro Grain Size Solid Tungsten Carbide End Mills for Metal Milling Discription: Tungsten carbide endmills have scallops on the outside diameter which causes the metal chips to break into smaller segments. This results in lower cutting pressures at a a given radial depth of cut. They are mainly used to rough mill the material off when large amounts of material are removed. They are made of carbide...

Brand Name:ZCCCT

Model Number:GM-4E-D8.0

Place of Origin:Zhuzhou

Zccct GM-4E-D8.0 solid carbide end mill, Tungsten carbide products Model Number: GM-4E-D8.0 1. Solid carbide end mill are suitable for Mold steel,Tool steel,Stainless steel,Cast iron . 2. Improve wear condition and improve tool life. 3.ISO application area...

Place of Origin:China

Brand Name:Jin Tai Pai

Model Number:D1-D20

Milling cutters/end mills are broadly divided into: 1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing; 2. Ball end milling cutter/end mill: semi-...

Brand Name:JT

Model Number:JTS

Place of Origin:China

... resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings. We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0

Brand Name:INMIND

Model Number:0.6*1.2*4D*50*2F

Place of Origin:China

... Workpiece upto HRC60 1 piece packing. Standard Length Type k44 Carbide Rod:Wc:88%,Co:12%,TRS:4000N/mm2, Grain Size:0.4um Specifications: Order No Cutting Flute Length Shank A.O.L d l D L 0.2*0.5*4D*50L*2F 0.2 0.5 4 50 0.3×1×4D×50L×2F 0.3 1 4 50 0.4

Brand Name:CTCB-AP

Model Number:D3.0-D12.0

Place of Origin:China

...Solid carbide 4-Flutes End Mills With High Feed Rate Abouts High Feed rate end mills : High feed solid carbide end mills have the typical high feed front-end geometry resulting in chip thinning. Due to this chip-thinning effect, relative high feed rates can be applied as a compensation factor for the small average chip thickness, helping eliminate vibration and tool deflection. High feed...

Model Number:N550

Place of Origin:MADE IN CHINA

Brand Name:KTC

... material, flexural strength: 4100mpa, grain size: 0.8μm. There are two categories for aluminum and steel respectively. The internal R milling cutter for steel is coated by imported coating equipment (black / Bronze), especially suitable for aluminum,

Brand Name:SUPAL

Model Number:OEM

Place of Origin:Jiangsu,Chiang(Mainland)

Tungsten Carbide End Mills/solid carbide endmills for cnc milling machine Material Tungsten carbide TRS >4000 N/mm2 HRA 91.8-92.4, HRC:45/55/60/65 Grain size 0.2-0.6μm Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9mm; 1-20mm Size Diameter 1.0mm-...

Brand Name:AMG

Place of Origin:CHINA

...Solid Carbide Corner Radius End Mill High Feed Long Reach for Steel/Stainless/Titanium CNC 20mm Introduction: Our premium 20-flute R2 corner radius end mill represents the pinnacle of high-efficiency machining technology. Designed for extreme metal removal rates in tough materials, this industrial-grade carbide...

Brand Name:BWIN

Model Number:Φ6R0.5*15*d6*50L

Place of Origin:China

...Solid Carbided Corner Radius End Mills Endmill R6 4 Flutes Tungsten Milling Cutter Characteristic:​ High gloss mirror surface, more wear-resistant Sharp four edge design Ultra wide chip removal space Large core diameter design Chamfering is easy to operate Description: The carbide end mill is made of new micro tungsten steel base material with high hardness and wear resistance; Scientific and engineering edge design, high...

Brand Name:Zhuzhou Shield

Place of Origin:Zhuzhou, China(Mainland)

Suitable for Copper, Cast iron,Carbon steel, Mould steel, Die steel, Stainless steel, Plastic, Arcylic, aluminum alo steel, non ferrous alloy etc. Product Description Material Tungsten carbide TRS >3600 N/mm2 HRA 91.8-92.4, HRC:45/55/60/65 Grain size 0.2...

Brand Name:Betalent

Model Number:Chamfering end mill

Place of Origin:China

Chamfer mill cutter, Chamfering end mill, Carbide chamfer mill, Manual chamfering end mill This end mill can be fit in a hand-operated drill for chamfering milling of metals, for example, for titanium alloy, steels, tool steels. Betalent Carbide has ...

Brand Name:Joeben

Model Number:BEM10

Place of Origin:Guangdong, China (Mainland)

carbide tungsten steel ball head double 60 ° CNC round head vertical milling cutter The use of new fine grain tungsten steel base material has a high wear resistance and strength, dedicated to the high hardness of high-speed cutting applications of all-...

Brand Name:Metcera

Model Number:Φ6(R0.5)x15x6Dx50mm 4F

Place of Origin:China

MPFR4 AlCr Coating Universal Cutting End Mills, 4 Flutes Round Nose Mill, Size: Φ6(R0.5)x15x6Dx50mm Workpiece materials: Alloy, General Steel, Pre-hardened Steel, Cast Iron, Mold Steel Application: High/Medium Speed ; Roughing processing

Brand Name:GREWIN/OEM

Model Number:D1-D12

Place of Origin:Zhuzhou

...Carbide Flat Roughing End Mill Micro grain raw material Grain size: 0.4-0.6μm Co 10%, 12% TRS >3600 N/mm2 Hardness HRA 91.8-92.5 Work piece HRC45-50 HRC55-60 HRC65 HRC68 Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9 mm; 1-20 mm Diameter of rods 4-20 mm Length 50-100 mm Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc Flutes No. 1-7 Introduction of the carbide materials of the End mill

Brand Name:Sanyinghe

Model Number:Negotiated

Place of Origin:Zhuzhou,China

... Composition6%-12%Co-WC 4. Density14.45-14.90g/cm3 5. Chemical Composition: 10%Co-Wc 6. Raw Material: Super Micro grain with Diameter less than 0.2UM 7. International Industrial Standard: K10, K05-K15, K20-K30, K20-K40 8.

Brand Name:RLD Tools

Model Number:HRC65-R6

Place of Origin:China

... edge tolerance Reinforced edge design for preventing edge chipping Outstanding performance at high-speed machining by ultra-fine micro-grain carbide (0.2μm) This is a high hardness ball nose end mill, Especially good for the hardened mold steel above

Place of Origin:Jiangsu China

Brand Name:Cbaner or OEM

Model Number:ball nose end mills

Solid Carbide HRC45 4Flutes carbide ball nose end mills Carbide Raw Material:HRC45 ,Grain Size:0.7um , TRS>3800n/mm2 Cutting Flutes: 4 Z Diameter:R0.5-R10.0mm Length:50-100mm Helix:30 degree Coating:TiAlN Machine: ANCA Grinder Work piece: Steel,stainless ...

Brand Name:TS

Model Number:SP/D0.5*F1*50L*C4*2T

Place of Origin:CHINA

Solid Tungsten Carbide 0.5mm End Mills Square Hrc55 The micro End Mills are the most productive. They can be general purpose or high perfomance. They can be used used for plunging, grooving, side milling, face milling, and counter boring. Excellent performance up to 55 HRC. Material: Tungsten Carbide...

Brand Name:OUQI

Model Number:Cemented Carbide Rods

Place of Origin:China

...Grain Size Ø12mm 160mm Long End Mill Blanks Finished Ground Specification: OD Ø12mm length 160mm. Application: Corrosion Resistance WC solid tungsten carbide plunger high precision cemented carbide rod. Suitable for machining composite materials, such as aluminum‐magnesium alloys, plastics, reinforced plastics, carbon, fiber, iron‐based alloys, etc. It is recommended for making big PCB drills of ф3.2‐6.3mm, micro drills of ф0.8‐3.2mm, micro