micrometer to millimeter

Brand Name:Uchi

Model Number:MHE024

Place of Origin:Dongguan，Guangdong,China

... a few millimeters to tens of millimeters, and the fluid is prone to form laminar flow (smooth flow, heat is only transferred by molecular diffusion, low efficiency). The equivalent diameter of microchannels is only 10 to 1000 micrometers (about 1/5 to ...

Brand Name:YUHONG

Model Number:AISI 304/304L/316L etc.

Place of Origin:CHINA

... about stainless steel capillary tubes: Small Diameter: Stainless steel capillary tubes have a very small internal diameter, typically ranging from a few micrometers to a few millimeters. The small size

Brand Name:BonTek

Model Number:Piezoelectric Wafer

Place of Origin:China

... or wafer made from a thin layer of LiNbO3 material. Size: The thin film has a diameter of 3 inches, which is equivalent to approximately 76 millimeters. This size is commonly used in various optoelectronic applications. Thickness: The thin film has an

Brand Name:V-4

Place of Origin:China

... top-notch ultrafiltration membrane technology. The diameter of the micropores on its membrane wall is only 0.01 micrometers (one ten thousandth of a millimeter), equivalent to one ten thousandth of the diameter of a human hair. This precise scale can

Model Number:HN40

Brand Name:HAINUO

Place of Origin:SHANXI CHINA

... manufactured for a wide variety of uses in research, medicine, consumer goods and various industries. Glass microspheres are usually between 1 and 1000 micrometers in diameter, although the sizes can range from 100 nanometers to 5 millimeters in diameter.

Brand Name:XINLAND

Model Number:XLD-915~XLD-1064 Laser Diode

Place of Origin:Xi'an Shaanxi

.... More than 20 laser processing technologies have been developed. Laser marking can produce a variety of characters, symbols and patterns, etc., and the size of the characters can range from millimeters to micrometers, which is of

Brand Name:SUPAL

Model Number:Micro Diameter

Place of Origin:Changzhou,Jiangsu,China

.... Micro diameter end mills typically have cutting diameters ranging from a few micrometers (μm) to a few millimeters (mm). The exact size can vary depending on the specific application and machining requirements. These end mills are much smaller in

Place of Origin:Guangdong, China

Brand Name:Masurtech

Model Number:DB-20

..., step, and depth measurements with accuracy of 0.001 ". SAE / Metric conversion switch automatically converts measurements to inches or millimeters with the simple press of a button. Adjustable thumbscrew provides tension for optimal movement of the

Brand Name:TOPTITECH

Place of Origin:Baoji, China

... made from titanium that has many small holes or pores throughout its surface. These pores can range in size from a few micrometers to several millimeters, depending on the manufacturing process and the intended use of the plate. Porous titanium plates are