mil std 202 electrodynamic shaker

Brand Name:LABTONE

Model Number:EV210

Place of Origin:CHINA

...fixed frequency A complete set of vibration testing system is composed of shaker, power amplifier and vibration measuring control system, in accordance with the relevant national and international standards (such as: MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB,

Brand Name:ASLI

Model Number:ES-30

Place of Origin:Guangdong, China

... Large Displacement 100mm Electrodynamic Vibration Shaker Meet MIL-STD-202 Method 213 Test Applicable Standards:MIL-STD, DIN,MIL-STD-202 Method 213 ,ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc. Application ASTM D4728 Dynamic Shaker Random Vibration Testing ...

Brand Name:ASLI

Model Number:ES-6

Place of Origin:China

MIL-STD 202 standard electrodynamics high frequency vibration shaker testing Application of vibration test equipment: vibration test system of vibration test Automotive electronics device, Motormeter assembly, Automobile ...

Brand Name:PRECISION

Model Number:VTS-10

Place of Origin:CHINA

... equipment can withstand extreme environmental conditions is non - negotiable. Our Electrodynamic Shaker for Shock and Vibe Testing has been engineered to meet the exacting MIL - STD - 810 test standard, offering a reliable solution for evaluating the

Brand Name:PRECISION

Model Number:VTS-40

Place of Origin:CHINA

Vibration Shaker Systems for MIL-STD-810 Method 514.6 Vibration Testing Our Vibration Shaker Systems are expertly engineered to perform comprehensive and compliant MIL-STD-810 Method 514.6 Vibration Testing. This military standard is critical for ...

Brand Name:ZL

Model Number:ZL-6031

Place of Origin:China

IEC61373 Vibration Table Electrodynamic Vibration Shaker Applicable standards: MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS, etc. Applicable industries: automotive, electronics, aviation, shipbuilding, ...

Brand Name:MENTEK

Model Number:MVTH-1000

Place of Origin:China

... test chamber or temperature & humidity chamber with heating rate from 3°C to 20°C per minute or as a vibration chamber when seamlessly integrated with an electrodynamic shaker or vibration testing equipment.It can meet a variety of MIL-STD, ASTM,

Model Number:HZ-4X100C5

Place of Origin:China

Brand Name:nenglv

...@380/230VAC and 50Hz Dielectric Withstanding Voltage 1000VDC (line to line) 1000VDC (line to case) DC Insulation Resistance As Per MIL-STD-202 Method 202 Terminal Strength As Per MIL-STD-202 Method 211 Temperature Rise As Per MIL-F-15733

Brand Name:TX

Model Number:TX-Con-F-01

Place of Origin:China

... know that the length, connector and color can be customized. Environmental Temperature Range -65⁰C to +165⁰C Thermal Shock MIL-STD-202 Method 107 (test cond. B) except at high temp test @ + 200⁰C Corrosion MIL-STD-202 Method 101 (test cond. B) 5%

Brand Name:Ao littel

Model Number:12 100 1.5

Place of Origin:CHINA

... and resilience Strong arc suppression characteristics Environmental data • Thermal Shock: MIL-STD-202, Method 107, Test Condition B (-65 °C to +125 °C) • Vibration: MIL-STD-202, Method 204, Test Condition C (55 Hz - 2 kHz, 10 G) • Moisture

Brand Name:Shareway

Model Number:LPE6855ER104NU

Place of Origin:Guangdong,shenzhen

...125 °C High Humidity 85 % Soldering Heat Tested to + 230 °C Mechanical Shock Per MIL-STD-202, method 213 (100G) Vibration Per MIL-STD-202, method 204 (20G) Solderability Per industry standards STANDARD ELECTRICAL SPECIFICATIONS: MODEL IND. (μH) IND. TOL

Brand Name:CME

Model Number:KRD31

KRD31 series constant acceleration tester is used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7. It is most suitable for testing electronic components or devices. Under high g effect...

Brand Name:GSKA

Model Number:Constant Acceleration Tester-Arm Type

Place of Origin:Dongguan China

... based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7. It is most suitable for testing electronic components or devices. Under high g effect on microcircuits, to check adaptability and reliability of wiring and the internal structures. It

Brand Name:Diodes

Model Number:BAT54C

Place of Origin:China

... Case: SOT-23, Molded Plastic Case material - UL Flammability Rating Classification 94V-0 Moisture sensitivity: Level 1 per J-STD-020A Terminals: Solderable per MIL-STD-202, Method 208 Polarity: See Diagrams

Brand Name:Zetex / Diodes Inc

Model Number:FMMT491TA

Place of Origin:Shenzhen, China

...Moisture Sensitivity: Level 1 per J-STD-020. Terminals: Finish – Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208. Weight 0.008 grams (approximate). Technical Specifications : Collector Current (DC) (Max): 1 A Collector-Base Voltage: ...

Brand Name:DIODES

Model Number:BAT42WS-7-F

Place of Origin:CN

... Case: SOD-323 · Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 · Moisture Sensitivity: Level 1 per J-STD-020C · Leads: Solderable per MIL-STD-202, Method 208 · Lead Free Plating ( Matte

Brand Name:DIODES

Model Number:DDTC123ECA-7-F

Place of Origin:Original

... Case: SOT-23 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminal Connections: See Diagram Terminals: Solderable per MIL-STD-202, Method

Brand Name:Infinity Machine

Model Number:RS - V Series

Place of Origin:Made in China

... testing for the household goods, electronic products, car parts, and portable equipments etc. RS-V electromagnetic vibration testers can meet the testing standards such as MIL, ASTM, IEC, ISO,BS, JIS. RS-V electromagnetic vibration testers have the

Brand Name:Ebuddy

Model Number:EY-RF-01

Place of Origin:China

... Military Specifications: Interface:Antenna connector Input Type:RF Digital Cable Temp.range -65°C~+165°C Vibration MIL-STD-202, Method 213 Impedance 50Ω Frequency Range DC~4GHz Working Voltage 500V max Withstand Voltage 1500V ...

Brand Name:Jrkconn

Model Number:D-SUB 01

Place of Origin:Guangdong, China

... of any other manufacturer, complying dimensionally with the Uniform standards. Solder terminations and boardlocks meet the requirements for solderability following MIL-STD-202, Method 208. The d-sub connectors are usually available in plugs and sockets