multimode fiber 400g osfp vr4 transceiver

Brand Name:own

Model Number:400G OSFP VR4

Place of Origin:China

..., hot-pluggable transceiver designed for next-generation data centers and high-speed networks. It supports 400G Ethernet and InfiniBand NDR applications with a reach of up to 50m on OM4 multimode fiber. This optical module features low power consumption,

Brand Name:ComeLink

Model Number:400G OSFP

Place of Origin:China

... OSFP MSA, IEEE802.3db6 and IEEE802.3ck7. Digital diagnostic functions are available via the I2C interface, as specified by the OSFP MSA. The optical transceiver is RoHS. Feature 1. Hot-pluggable OSFP Type2 form factor with out heat sink 2. Support 425Gb/s

Brand Name:Top-Trans

Model Number:TOSFP-400G-DR4+

Place of Origin:China

... at 50Gb/s each, for a total of the bandwidth of 400Gb/s. This post will give an introduction of 400G OSFP transceiver types, the fiber connections, and some QAs about OSFP. Parameters Fiber Type SMF Connector LC Tx EML CWDM Rx Pin Power Consumption (W

Brand Name:TAKFLY

Model Number:MPO/MTP-LC Patch Cord

Place of Origin:Shenzhen, China

... saving and reduce cable management troubles. It is optimized for 40G QSFP+ PLR4, 100G QSFP28 PSM4, 400G OSFP DR4/XDR4 and 400G QSFP-DD DR4/XDR4 optics direct connection and high-density data center applications. Fiber Optic MTP/MPO-LC Fiber Patchcord -

Brand Name:Guanglian

Model Number:OPTR-DS85S-C

Place of Origin:Made in China

400G QSFP-DD DR4 500m optical transceiver Guanglian’s 400GBASE-SR8 optical transceiver module supports link lengths of up to 100m over multimode fiber (MMF) with MTP/MPO-16 connector. It is compliant to IEEE 802.3bs protocol and 400GAUI-8/CEI-56G-VSR-PAM4 ...

Brand Name:UNIFIBER-OEM

Place of Origin:CHINA

...Fiber Optic Patch Cord, 12fibers Multimode MPO/MTP harnesses Breakout cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With US Conec MTP connectors and Corning SMF-28 ultra optical fiber, it is optimized for 40G QSFP+ PLR4 to 10G SFP+ LR, 400G OSFP...

Brand Name:OEM

Model Number:MPO-MPO-16F-F-3.0-OM5-B-1M

Place of Origin:CHINA

...fiber optical patch cord 3.0mm LSZH patch cable 16 core MPO female-MPO male OM5 patch cable is assembled with Senko brand MPO connector and 50/125 multimode OM5 fiber optic cable. The OM5 optical fiber cable is more suitable for the high speed rate 100G, 200G and 400G transceiver. Each OM5 fiber can support the transmission of 4 wavelengths. This reduces the 1/4 fiber...

Brand Name:Trixon

Model Number:xxxx

Place of Origin:CHINA

...400G QSFP-DD DR4 Transceiver also supports 100GBASE per lane in multimode fiber, making it a versatile and flexible solution for a range of networking applications. It has an operating case temperature range of 0 to +70°C, ensuring reliable performance in a variety of environmental conditions. Overall, the 400G QSFP-DD DR4 Transceiver...

Brand Name:GEZHI or OEM

Model Number:OS2 9/125 MPO Cable

Place of Origin:China

...Multimode Patch Cord Product Description GEZHI Photonics is a factory of pre-terminated 9/125 OS2 Single Mode MPO trunk cable, which offers the user the advantage of consistent quality, much faster installation, and simpler cable management. The MPO fiber optic trunk cable is suitable for use in 40G QSFP+ transceiver, 100G QSFP28, 400G OSFP, 400G QSFP parallel transceiver optics connection. Each MPO OS2 fiber

Brand Name:KEXINT

Model Number:OM5 12 core MTP/pro 5M type B

Place of Origin:CHINA

MPO/MTP Trun cable patch cord, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With US Conec MTP connectors and ...

Brand Name:E-link

Model Number:LNK-OSFP-400G-LR8-10

Place of Origin:China

... single mode fiber (SMF) with duplex LC connectors. The 400 Gigabit Ethernet signal is carried over eight wavelengths. Multiplexing and demultiplexing of the eight wavelengths are managed within the device. SFP Fiber Transceivers Advantages Compliant with

Brand Name:CY COM

Model Number:OSFP 800GE SR8

Place of Origin:Shenzhen,China

... pulse amplitude modulation (PAM4) format. The optical module provides point-to-point 800 Gigabit Ethernet links over eight pairs of multimode fiber, with a reach of up to 100 m for OM4 (MMF) and 60 m

Brand Name:OEM and ODM

Model Number:MPO Trunk Cable

Place of Origin:Guangdong, China

Product Description MPO/MTP Trun cable patch cord, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With US Conec MTP...

Brand Name:KPD

Model Number:O400 NDR SR4

Place of Origin:CHINA

...Transceiver from KPD. This device features an LC connector and offers a transmission distance of up to 50m over single mode fiber (SMF). It is designed to meet the increasing demand for high-bandwidth data center interconnects. -Ethernet (ETH) 400Gb/s, single-port, OSFP-encapsulated, SR4 multimode optical module -Uses a single 4-channel MPO-12/APC fiber...

Brand Name:Geehe

Model Number:GH-MPO-003

Place of Origin:Wuhan China

OM3, OM4 3.0mm, 3.6mm Round Cable 400G 16F MPO Pre-terminated Jumper Cable Basic Information: The OSFP-SR8 or MPO jumper with the 16F MPO connector is used for the connection between the OSFP-SR8 400G optical transceiver module in the data center. It can ...

Brand Name:Hilink

Model Number:OSFP-400GB-SR8

Place of Origin:Guangdong, China

...OSFP SR8 MMF 100m OM3 Optical Transceiver Applications Data Center Interconnect 400G Ethernet Infiniband interconnects Enterprise networking Features OSFP MSA compliant 8 parallel lanes on 850nm center wavelength Compliant to IEEE 802.3bs Specification Up to 100m transmission on multi-mode fiber...

Brand Name:OMC or OEM

Model Number:2 / 4 / 8 Fibers CS UPC SM

Place of Origin:China

...Fibers CS UPC Singlemode Fiber Optic Adapter Without Flange For Data Center Network uplinks need to move to higher speeds to match servers. The IEEE has released a new standard (IEEE 802.3.bs- 2017), but currently there are parallel and WDM transceiver structures for 200/400G QSFP-DD/OSFP, each needing 8 optical lanes. Due to the QSFP interface, 2X duplex LC connectors cannot fit in the QSFP-DD/OSFP...

Brand Name:XDK

Model Number:MTP/MPO

Place of Origin:China/ Vietnam

... 400G QSFP-DD and OSFP transceivers that transmit 8 x 50G channels over 16 fibre cores. Using the low loss MT Elite® 16 fibre ferrules and Corning Clearcurve® glass, Complete Connect offer 400G MTP (MPO) patch cables with guaranteed performance and

Brand Name:Geehe or OEM

Model Number:GH-MPO 016

Place of Origin:Wuhan,China

...MPO MTP Industrial Protection Fiber Optic Patch Product Description: 16F MPO Pre-terminated Jumper Cable The OSFP-SR8 or MPO jumper with the 16F MPO connector is used for the connection between OSFP-SR8 400G optical transceiver module in the data center...

Brand Name:YT

Model Number:YT-SFP LR

Place of Origin:china shenzhen

Network Fiber Optic SFP Module 400G 10KM CWDM QSFP For Big Data Centre Designed for 2x 200G Ethernet 200GBASE-SR4 links over multiple multimode fibers, the Gigalight 400G QSFP-DD SR8 optical module (GQD-MPO401-SR8CA) supports transmission distance up to ...