petroleum industry melt flow index tester

Brand Name:JHH

Model Number:XNR-400A

Place of Origin:Beijing, China

Melt Flow Index Tester Used/Melt Flow Index Mfi Testing Machine Manufacturer Product Description: This Melt Flow Index Tester Used/Melt Flow Index Mfi Testing Machine Manufacturer is used to determine the MFR value of the standard die melt flow rate per 10min through a certain temperature and load when the various plastics and resins are in the viscous flow state. It is suitable for polycarbonate, polyarylsulfone and fluorine with higher melting

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...Melting Point Tester,Melt Flow Index Tester,Melt Flow Index MFI Testing Machine Specifications Melt Flow testing machine 1.Melt Flow Indexer is used to determine melt-mass flow rate . 2.High quality,melt indexer 3.Direct factory 1.Melt Flow testing for PP and PE 1.Melt index tester is used to determine melt-mass flow rate (MFR). 2.High quality,melt indexer Electronic MFR Plastic Melt Flow Index...

Brand Name:Kejian Kinsgeo

Model Number:KJ-3092B

Place of Origin:Dongguan China

AC220V±10% 50HZ MFR Melt Flow Index Machine , Electronic Melt Flow Index Tester with One Year Warranty Introduction: Melt Index Tester meets the standards GB/ T3682-2000, the main parameters of Melt Index Tester also meet the standard requirements of ...

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

... 2000,ASTM D1238. It's suitable to measure melt flow character of PP, PE, POM, ABS plastics and plastic productions, widely used in factories, products quality testing station, scientific and research institutes, and concerned industries. Specification:

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R804-2

...Melt Flow Index Tester JIS-K72A Brief introduction Purpose: Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermo plastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow...

Brand Name:Great Win

Model Number:GW-108

Place of Origin:China

...Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting...

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

Melt Indexer Price,Melt Flow Index Tester Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 degrees) for a ...

Place of Origin:China

Brand Name:GC

Model Number:GC-MI-DP

... every 10 minutes when various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also,

Brand Name:AISRY

Model Number:ASR-5605

Place of Origin:China

High Quality Application Determination Of Melt Flow Rat Testing Machine Application: It can be used for the determination of melt flow rate and melt density of various plastics such as polyethylene,polypropylene,polystyrene,ABS resin,fiber resin,...

Brand Name:DAXIAN

Model Number:DX 6001

Place of Origin:China

ISO 1133 High Precision Temperature Control Melt Flow Rate Testing Equipment Specifications: Measuring range 0.1-800 .00g/10min (MFR) 0.1-800.00 cm3/10min (MVR) Temperature range room temperature -450 ℃ Temperature accuracy ± 0.2 ℃ Timing accuracy 0.1S ...

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, ...

Brand Name:BonninTech

Model Number:XNR-400B/D

Place of Origin:Wuhan, China

...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test ...

Brand Name:AI

Model Number:AIC41098

Place of Origin:China

Product description: Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

..., nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Brand Name:Tunsing

Model Number:DS220

Place of Origin:China

DTF tpu polyurethane transfer hot melt powder Products Description This product is a polyurethane thermoplastic powder hot melt adhesive. Soft feel and certain resilience, excellent processability.Excellent adhesion to fabric, cotton, blended fabric, TPU, ...

Brand Name:Lixian

Model Number:HZ-1706

Place of Origin:China

...ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Melt Index Tester To meet the

Brand Name:YUYANG

Model Number:YY212

Place of Origin:China

Thermal Radiation Melt Drop Tester Standard: NF P92-505, EU 95/28/EC, ECE R118 Annex 7 Application: Sourcing products for building materials, railroads, automotive interiors Features: 1. all fixtures are made of stainless steel, beautiful appearance and ...