pin hardness iec test equipment

Brand Name:HongCe

Model Number:MF-1

Place of Origin:China

... details: This plug pin force verification tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the

Brand Name:kingpo

Model Number:KP-SH06

Place of Origin:china

...IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing –Part 2-75: Tests – Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. Feature: The construction consists of a moving hammer head having a hard polyamide ...

Brand Name:HJ

Model Number:HC9921

Place of Origin:China

... hammer and Annex D; IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.1, figure 22-...

Brand Name:SHC

Model Number:SC-FS05

Place of Origin:China

IEC60884 Figure 14 Device For Testing Non Solid Pins Load Weight Product overview: The appliance is checked by the test of clause 24 and, for pins which are not solid, by the following test which is made after the test of clause 21. A force of 100 N is ...

Brand Name:KINGPO

Place of Origin:China

... of PLC Control Product information: KingPo has designed a series of PLC control with 7 inch touch screen display system test equipment, they are more humanized than the old version ones, and the new version PLC ones have won high reputation from the

Place of Origin:China

Brand Name:ALLIED TESTING

Model Number:TP02

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:LIYI

Model Number:LY-XJJD5

Place of Origin:CHINA

..., electrical insulating materials etc. Nonmetal material impact toughness is determined. Characteristics: 1. Chinese/English characters LCD shows the results, the storage of test results.

Brand Name:DAXIAN

Model Number:DX7019

Place of Origin:China

Electronic Hardness Rubber Testing Machine , Shore A Hardness Tester for Rubber Plastic Description: The tester is used for testing hardness of foam materials and sponge materials. Each Durometer type is made to a specific scale (i.e. A, C, D) and is ...

Brand Name:Mitech

Model Number:JMHVS-1-XYZ

Place of Origin:Beijing China

... for other hardness units; Test force: the test force loaded by the instrument; D1 (D2): indentation diagonal length; Charge time: test time, test force to maintain time; Test temperature: Ambient temperature; Number of tests: the number of shocks that

Brand Name:JIEDONG

Model Number:JD-3022

Place of Origin:Guangdong, China

... products, imitate people's repeated seat life test, with a certain hardness of the round bar aluminum as the indenter, drive with the cylinder, adjust a certain pressure of 17kg, determine the degree of damage after the number of arrivals. ...

Brand Name:SAMYON

Place of Origin:CN

... of Low inflation, high temperature resistant, high strength, high hardness,High light transmittance and stability of high chemical stability, special glass. Clear Scale The scale does not wear easily (...

Brand Name:AISRY

Model Number:ASR-5600

Place of Origin:China

Multifunction Alcohol Wear Resistant Tester Alcohol Rubber Pencil Hardness Abrasion Test Equipment Application : Alcohol abrasion testing instrument for TV remote control button silk screen, plastic, mobile phone shell, headphone shell silk screen, battery...

Brand Name:PEGO

Model Number:PG-TP1

Place of Origin:China

Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is ...

Brand Name:Sinuo

Model Number:SN1106

Place of Origin:China

IEC 60950 Clause 2.10.8.4 Harden Steel Pin Scratch Resistance Test Apparatus Equipment Overview 1 Standard compliant The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard requirement of IEC 60335-1 clause 21.2, IEC...

Brand Name:SKYLINE

Place of Origin:China

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is

Brand Name:Sinuo

Model Number:SN1112D

Place of Origin:China

...Test Equipment Complied Standards & Clauses IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. Equipment Overview The Tinsel Cord Bending and Snatch Test Equipment is designed and manufactured according to the standard requirement of IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. It is used to test...

Brand Name:LABTONE

Model Number:EV210

Place of Origin:Dongguang, China

Vibration Test equipment Complies With IEC 60068-2-6 and IEC 60598-1 Standards Vibration Test Equipment Manufacturer : Labtone Test Equipment Vibration Test Equipment standards : MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc. Model EV340 EV350 ...

Brand Name:ASLI

Model Number:ES-20

Place of Origin:CHINA

...test equipment ES-20.pdf 2000kg.F Force Vibration Table Test Equipment for IEC 60335-2-24 and IEC 60335-2-40 high frequency vibration test machine is mainly used for product vibration and shock environmental test environment, environmental stress screening test, reliability test, tests may be needed to do for aerospace, communications, electronics, electrical, communications, home appliances and other areas of the products. It is a test

Brand Name:YUYANG

Model Number:YY429

Place of Origin:China

...IEC 60331 Line and Cable Fire Resistance Testing Equipment Introduction: Fire Resistance Tester is used in test conditions where the basic flame temperature is at least 750ºC and tests the cable exposed to the flame that needs to maintain the circuit integrity. Standard: IEC 60331 - Test for electric cables under fir conditions - Circuit integrity IEC 60331 Part 11 - Apparatus - Fire alone at a flame temperature of at least 750˚C IEC