plc splitter 1x8 for ftth pon

Brand Name:XDK

Model Number:PLC-3

Place of Origin:China/ Vietnam

...PLC Splitter 1x8 For FTTH PON Description: The PLC splitters are used to separate or combine optical signals. A PLC (planar lightwave circuit) is a micro-optical component based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability. Specification 1×N PLC Splitter...

Brand Name:SUNET or OEM

Model Number:Steel Tube Type

Place of Origin:Qingdao,China

...PLC Splitter 1x8 For FTTH FTTB FTTX Network Description PLC Splitter is based on planar Light wave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN .PLC Splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. SUNET's PLC Splitter...

Brand Name:SLR

Model Number:SL-mini PLC-1x8 APC

Place of Origin:GUANGDONG CHINA

.... It features a compact size, high reliability and wide operating wavelength range with good channel-to-channel uniformity. It’s widely used in PON,ODN,FTTX point to connect between termination device and central office to

Brand Name:GAPHO

Model Number:Optic PLC Splitter

Place of Origin:China

.... It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical signal power management. We provide a whole series of 1 x N and 2 x N

Brand Name:Sea dragon

Model Number:sl-1, SC APC MIN PLC distributor

Place of Origin:Hebei china

...PLC Splitter 1x8 SC UPC Mini Product Description: characteristic * Excellent machinery, small size * High reliability * Low insertion loss and low polarization dependent loss * High number of channels * Excellent environmental stability and extensive product properties: Place of Origin: Hebei, China Brand: Xingcheng Model: sl-1, SC APC MIN PLC distributor Application of optical fiber splitter: FTTH FTTX PON...

Brand Name:Fiberall or OEM

Model Number:FA-PLCM1×8SA

Place of Origin:China

1x8 Mini Fiber Optic PLC Splitter For FTTH With SC APC Fiber Connector Fiberall Technology ( Shenzhen ) Co ., Ltd offer optical fiber plc splitter with various input and output fiber . As for bare fiber type , input is bare fiber and output is ribbon fiber...

Brand Name:YINGDA

Model Number:1x32 plc splitter

Place of Origin:china

...PLC Splitter 1x8 With SC Connector Colored Single Mode For PON XGPON Network Planar lightwave circuit PLC splitter is a type of optical power management passive device that is fabricated using silica optical waveguide technology, it can split optical signal evenly. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON...

Brand Name:Seacent

Model Number:1x12 mini module

Place of Origin:Guangdong , China

FTTH FTTB FTTX Fiber Optic PLC Splitter 1x8 With SC APC Connector FTTB FTTX Mini Fiber Optic PLC Splitter 1x8 With SC APC Connector A fiber optic splitter is a passive optical device that enables the distribution of a light signal from an optical fiber to two or more fibers. These splitters...

Place of Origin:China

ABS Material Fiber Optic PLC Splitter 1X8 SCUPC Cassette Type Grey For WDM - PON​ We offer several types of high-quality splitters. These products are designed for long-term reliability, superior performance, and a wide range of uses in fiber optics ...

Brand Name:OPTICKING

Place of Origin:China

1x8 optic fiber plc splitter mini plc splitter for FTTH Fiber optic equipment 1260 to 1650nm ftth optic fiber plc splitter 1x4 1x8 1x16 1x32 1x64 Features ※ Low Insertion Loss ※ Low PDL ※ High Reliability and stability ※ Wide range of operating wavelengths ※ Passed GR-1209 & 1221-CORE Test Application ※ Fiber optic equipments & systems ※ CATV networks ※ Data communications ※ Passive optical network Premium Grade Parameter 1x2 1x4 1x8...

Brand Name:Begate, OEM and ODM

Model Number:Fiber Optic PLC Splitter

Place of Origin:Guangdong, China

Product description of Fiber Optic PLC Splitter The PLC (Planar Lightwave Circuit) planar waveguide optical splitter is composed of an optical waveguide chip and optical fiber arrays coupling at both ends. This product uses semiconductor lithography ...

Brand Name:QY

Model Number:PLC splitter

Place of Origin:China

... input fiber to multiple output fibers. Available split counts are: 1x4, 1x8, 1x16, and 1x32. PLC Splitters are availble with 900µm loose tube singlemode fiber and terminated or unterminated as per your needs. Unconnectorized PLC splitter come with no

Brand Name:KELONG

Place of Origin:CHINA

...PLC Splitter 1x8 Insertion Type Plc Planar Lightwave Circuit PLC Splitter Same as cable transmission system,optical network system also need signal coupling,branching and distribution,splitters can meet these functions.Splitter is the important device in PON transmission system,splitters...

Brand Name:TTI

Model Number:S-1

Place of Origin:Guangdong, China

...PLC Optical Splitter SC APC SC UPC Fiber Optic PLC Splitter 1x8 1x32 1x16 1x64 1. Description: Fiber Optic Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and this passive splitter widely used in FTTX PON to realize optical signal power management. PLC splitter...

Brand Name:TTI

Model Number:PLC-108

Place of Origin:China

FTTH G657A1 G657A2 Fiber Optic Splitter Box Plc Splitter 1x8 Description: PLC Fiber optic splitter is a micro-optical element using photolithographic techniques to form optical waveguide at medium or semiconductor substrate for realizing branch distribution function. Fiber splitters are available with 1x2, 1x3, 1x4, 1x5, 1x6, 1x8...

Brand Name:OEM

Model Number:PLCL-1*8-0.9-SCU-1M

Place of Origin:CHINA

...PLC splitter 1x8 LGX type fiber optic splitter with SC / UPC adapters LGX style Planar Light wave Circuit (PLC) Splitter utilizing the PLC photonic chip, allows light signal received and distributed at the same time. The LGX box 1:8 splitter can load the mini module 1:8 PLC and is suitable for different FTTH terminal boxes. The LGX box type splitter...

Brand Name:CSYHT

Model Number:YHT-PLC Splitter

Place of Origin:China

1x8 1x16 x1x32 1RU Sliding rack mounted type PLC splitter for FTTX FTTH : YHT OSB-RS-S1U series sliding type rack mounted PLC splitter with mini patch panel design , can be load 1x8 1x16 1x32 ABS box PLC splitter or FO Steel tube PLC splitter . It is desing with 1U height , can be easily installate on racks or cabinets . Sliding rail desing can help customer easy operation or maintain the solutions . There are many type Rack mounted PLC splitter

Brand Name:UT-King

Model Number:PLC-C108SA

Place of Origin:China

...PLC Splitter 1x8 Modular Design With Low PDL Divisor De Fibra Description UT-King' s Planar Lightwave Circuit (PLC) Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON...

Brand Name:OMC or OEM

Model Number:1x8 Mini Module 900μm SC APC Singlemode

Place of Origin:China

...PLC Splitter 1x8 Mini Module 900μm SC APC Singlemode PLC splitter is an optical power distribution device based on the integrated waveguide of quartz plate. With the features of small size, wide range of operating wavelength, stable reliability and good uniformity, It’s widely used in PON,ODN,FTTX point to connect between termination device and central office to achieve the signal splitter. OMC ‘s Blockless PLC Splitter...

Brand Name:OTOP / OEM Accepted

Model Number:SC / APC 1x8 Micro Steel Tube

Place of Origin:China

FTTH Micro Steel Tube Type PLC Splitter 1x8 Lower Insertion Loss OEM Accepted ♦ Quick Details - Product Model: 1x8 PLC splitter - Connector: SC, LC, FC, ST - Ferrule: APC, UPC - Splitting ratio: 1*8 - Fiber diameter: 0.9mm - Certification: Telcordia GR-1209 & GR-1221 compliance, ISO 9001, ISO 14000 & OHSAS18000 - Operation Temperature: -40℃ to + 85℃ - Operating wavelength(nm): 1260-1650 Specification Parameter Unit 1x2 1x4 1x8...