preventing blowout choke manifold valves

Brand Name:CCSC

Model Number:4 valves or 5 valves

Place of Origin:China

Choke Manifold - Well Testing Choke Manifold Choke manifold is a system of valves and chokes for controlling the flow from the well usually has two flow paths, one adjustable choke used primarily for cleaning the well up and facilities to install and change choke of fixed sizes for a more accurate flow control during main well flow periods. Each flow path has two closing gate valves which are used to direct the flow through either of the chokes

Brand Name:TR Solids Control

Model Number:JG/S2-35 JG/SY-35 JG/SY2-70 JG/S2Y2-105 YG-35 YG-70 YG-105

Place of Origin:Xi‘an,China

... is adopted to execute new drilling-well’s technique of balance pressure, which can avoid pollution of oil-layer, improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool.

Brand Name:HUIFENG

Place of Origin:CHINA

...Choke Valve 52-103MM Choke Manifolds Parameters of the product Choke and kill manifolds are important equipment for preventing blowout, controlling pressure changes in oil and gas wells, and ensuring the continuous implementation of underbalanced drilling. After the well is shut in due to a kick, the varying degrees of opening and closing of the throttle valve...

Brand Name:Hebei Pantu

Model Number:YG35

Place of Origin:China

...hole pressure to prevent the occurrence of lost circulation and blowout; the blowout prevention pipeline connected to it can be used to directly release blowout to release the well Bottom pressure; Choke Kill Manifoldcan also be used to inject cement and

Place of Origin:CHINA

...choke manifold Rated Working Pressure 2000psi - 25000psi Descriptions of Filter choke manifold Rated Working Pressure 2000psi - 25000psi : Major parts:slab gate valve, choke valve, studded cross, flow line, flange etc. Choke manifold can adjust pressure in oil (gas) well effectively and prevent well blowout. Choke valve can be manual, positive or hydraulic type. Gate valve...

Brand Name:JC Wellhead

Model Number:4 1/16" x 5000 psi Choke and Kill manifold

Place of Origin:China

...Choke and Kill Manifold For Oil Well Flow Control with API 6A Valves The chock manifold and the kill manifold are conform to API16C standard, which is important well flow control equipment for down-hole operation. The choke manifold and kill manifold is used to carry out near balance drilling. During drilling, the choke manifold and kill manifold are able to keep reservoirs form pollution and control well blowout efficiently. The choke

Brand Name:ZZ TOP OIL TOOLS

Model Number:4 1/16" x 5000 psi

Place of Origin:China

...Manifold Choke & Kill Manifold For Well Flow Control The choke manifold is necessary well-control equipment in effectively controlling kill and carrying out pressure controlling for oil and gas well. The equipment can be used to carry out the new technology of balance pressure drilling. Choke manifold can keep oil formation from pollution and increase drilling speed. The manifold can effectively control well blowout. Kill and choke

Brand Name:Zonco

Place of Origin:China

... and are necessary equipment to successfully control the kick and implement the pressure control technology of oil and gas wells. When a well kick or blowout occurs, use the valve in the choke manifold to open and close, control a certain back pressure to

Model Number:1 13/16"- 4 1/16"

Place of Origin:China

...technology. In case that the BOP is off, the pressure at the bottom of well shall be kept higher than formation pressure through controlling casing pressure with choke valve on-off. Additionally, soft shut-in can be realized through relieving pressure with

Brand Name:SHRT

Model Number:Choke Manifold

Place of Origin:SHANGHAI IN CHINA

Choke Manifold is a necessary equipment to carry out the pressure control technology in the oil/gas well. It is used for controlling casing pressure, keeping wellbore pressure balance, to avoid overflowing and prevent wells from blowing out, releasing pressure through choke valves to realize soft closing, and blowing down to protect the wellhead. It can be provided with the hydraulic control manifold for the remote control. The choke manifold

Brand Name:FORUS

Model Number:2-1/16" 10000PSI

Place of Origin:China

Hand Plate Valve 2-1/16 Inch Pressure 10000PSI Wellhead Manifold Valve Hydraulic Plate Valve Product Introduction Flat gate valves for critical high pressure (5,000 psi to 15,000 psi) service applications on wellhead devices, trees and pipe manifolers are ...

Brand Name:CCSC

Model Number:4 valves or 5 valves

Place of Origin:China

... from the flowhead to the choke manifold, where flowrate and pressure are reduced by the restrictive orifices in the choke manifold. Choke manifold consists of four gate valves, (five if a bypass valve needed), a positive choke, an adjustable choke, and

Brand Name:OED or OEM

Model Number:Customized

Place of Origin:China

...Valve Cage Wellhead Blowout Preventer For Oil Gas Wear Parts​ Carbide wear parts for oil and gas industry, wellhead assembly, such as multi­stage choke manifold, multi­stage blow down processing, products such as small bits, choke bean, core and seat, plates for throttle valve...

Brand Name:ASEEDER

Model Number:Choke beans-0010

Place of Origin:CHINA

... H2 big john choke bean, body Material: 410SS, lined with Tungsten Carbide (C10 or C25) , to protect them from corrosive and abrasive wear. On one side of the choke manifold, calibrated choke beans are used to control flow rate through the fixed choke box.

Brand Name:Lake

Model Number:All models

Place of Origin:China

... circulation and bleed by opening and closing the gate valve of the manifold or adjusting the choke valve. It also can adjust the pressure between the bit pressure and the casing. They are the tools used for the balance-drilling or the unbalance-drilling.

Brand Name:Ruixin

Model Number:2.5inch ID 3inch ID 4.06inch ID 5-1/8inch ID

Place of Origin:China Baoji

.... Annular space around wireline or slickline will be sealed by closing lubricator valve when the wireline or slickline is still in the hole. Then the pressure in the well will be sealed to prevent blowout. Single ram BOP is usually used for wireline and

Brand Name:MIROC

Place of Origin:China

...connected with the added drilling tools as soon as possible, when the blowout is happened during lifting the drilling tools, the inside blowout preventer has many advantages such as high-pressure, sealed reliable, easy to operate, switch quickly and so on.

Brand Name:SMC

Model Number:VQ21A1-5G-C8

Place of Origin:China

...VALVE MONOMER FOR DRY AIR Description: VQ21A1-5G-C8 1.High frequency operation Fast response time: Under 7 ms (VQ20), under 20 ms (VQ30) 2. With the built-in quick change connector to complete simple piping work DIN socket type, can be used for dust resistant, blowout resistant manifold...