rubber cables flexing test apparatus

Brand Name:Sinuo

Model Number:SN2302

Place of Origin:China

...Rubber Cables Flexing Test Apparatus Product Infromation: The Rubber Cables Flexing Test Apparatus is designed and manufactured according to standard IEC 62368-1:2018 clause Annex G.7, IEC60065:2014 clause 16.3 b), IEC60227-2 clause 3.1 Figure 1 and etc. It complies with the relevant standard requirements of rubber plastic wires and cables mechanical strength flexing test. This test does not apply to flexible cables

Brand Name:HJ

Model Number:HC9919/HC9920

Place of Origin:China

IEC Test Equipment Flexible Cable Flexing Test Apparatus Flexing Angles Adjustable Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 23.4 and figure 21； IEC 60320-1 ‘Appliance ...

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at

Brand Name:Kingpo

Place of Origin:China

....2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ...

Brand Name:HongCe

Model Number:PCF-1

Place of Origin:China

...-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it

Brand Name:HTI

Model Number:TX-513

Place of Origin:Guangdong,China(mainland)

...Flexing Test Apparatus Footwear Testing Equipment in Laboratory Description: Sole adhesive or suture zone in the surface of canvas, cloth tape and then set the wheels of this machine, start the wheels, shoe soles that are bent, bending, after a certain number to view the damage and fracture shoe case, in order to understand their resistance to bending properties. Specification: While test...

Brand Name:I-suntop

Model Number:GFKR-1000

Place of Origin:China

...: This equipment is suitable for testing optical cable (such as elevator optical cable) withstand the ability of repeated flexing in operation, by applying repeated flexing force, for qualified optical cable requirements optical fiber does not break,

Brand Name:MIYU

Model Number:MY-XC-C6

Place of Origin:China

180-degress, Wire/Cable Bending Tester (MY-XC-C6), with competitive price, both OEM and ODM available from us Technical Specification 1. R angle :R3,R5,R12.7, replaceable fixture 2. Test speed: 5-60 times / min, adjustable 3. Test times:99999999 times 4. ...

Brand Name:DAXIAN

Model Number:UL 1685

Place of Origin:China

...Cable Burning Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable...

Brand Name:Lixian

Model Number:HZ-3610

Place of Origin:China

...Testing Equipment Flexing Tester For Shoes JIS K6260 Footwear Testing Equipment Summary The tester applies to test flexion resistant for rubber products, shoe soles, PU, and other materials. The specimen by constant stretched, bended, and then observe its attenuation, damage and cracking. Reference ASTM testing specifications. Footwear Testing...

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the

Place of Origin:China

Brand Name:KeRang

... 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Application:It is used for checking the wear resistance test of the completed flexible cables. Test sample:Completed flexible cables. Feature:This test shall be

Brand Name:SHC

Model Number:SC-WATA

Place of Origin:China

...Test Apparatus 3 work station cable tester Technical Parameters: Power supply AC230V 50Hz Fixed shaft diameter Φ40±0.3mm Test rate Single strokes 40±1 times/minute Test stroke 0.1mm up-and-down movement Working station 3 Weight 500±5g*3 Counter 0~999999 (can be preset) Dimension 1200×400×1400 (mm) Products Introduction: This apparatus conforms to IEC60245-1 Rubber insulated cables...

Brand Name:Herrman

Model Number:GQR-1000

Place of Origin:China

...cable flexing testing machine fiber optic cable flexing tester Description The equipment is used to test optical cable resistance repeated deflection properties. By applying repeated deflection force, for the qualified optical cable, no fiber fracture, fiber attenuation values meet standard, no optic cable...

Brand Name:ZL

Model Number:ZL-1052

Place of Origin:CHINA

... and Cable Mechanical Flexing Test Equipment with Standards IEC 227 IEC 245 UL 1581 VDE 0472 Overview: The Wire and Cable Flexing Testing Machine supports multiple test loads, meeting the dynamic flexing test requirements for soft wires and cables by ...

Brand Name:ASLI

Model Number:AS-PC-10000

Place of Origin:China

..., such as rubber, plastic, wire and cable, fiber optic cable, safety belt, safety belt, leather belt composite, plastic profile, waterproof coil, steel pipe, copper, profile, ...

Brand Name:YUYANG

Model Number:YYW002

Place of Origin:China

...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-P302

... 2. Materials:shoes, rubbe The usage: Horizontal Type Low Temperature Flexing Testing Equipment is used to test if the materials such as leather, textile, rubber, shoes can endure the flexing at low temperature. Different fixtures can be installed in