shaft conical mandrel tester

Brand Name:Lonroy

Model Number:BGD 566

Place of Origin:China

...Conical Mandrel Tester Coating Shaft Bending Machine 1. Description: The Conical Mandrel Tester is designed in accordance with the standards of GB/T 11185 and ISO6860-84, and is used to evaluate the crack resistance or anti-peeling performance of the coating of colored paints, varnishes or related products when bending around a conical...

Brand Name:Btutest

Model Number:BTU-CCMBTHQ

Place of Origin:Made in China

... rod, and clamp the fixing plate. → bend the test plate along the conical axis with the manual operating lever → bend the sample 180 degrees with uniform force within 15 seconds → remove the paper and check the ...

Brand Name:HUATEC

Model Number:1605

Place of Origin:Beijing

Conical Mandrel Bending Tester Product Introduction: A very robust mechanical unit for determining the elasticity, adhesion and elongation of dried paint on sheet metal. It can be used in accordance with ...

Brand Name:HUATEC

Model Number:1605

Place of Origin:CHINA

Conical Mandrel Bend Tester Astm D522 Standard With Firm Structure Product Introduction: A very robust mechanical unit for determining the elasticity, adhesion and elongation of dried ...

Brand Name:Sinuo

Model Number:SN2204

Place of Origin:China

...Mandrel Tester Product Overview: This tester complies with IEC 60065: 2014 Clause 8.21, Figure 14-16, IEC 60558-1Fig6, IEC 60950 and other standards for tensile and electrical strength verification of indivisible thin layer materials. The tester has mechanical limits at 0 ° and 230 ° to ensure the accuracy of the test angle. Technical Parameters: Mandrel...

Place of Origin:China

Brand Name:HongCe

Model Number:MT-1

IEC60558-1 Fig6 Mandrel Tester Device Light Testing Equipment 100N / 150N Product information: This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel ...

Place of Origin:Jiyuan, China (Mainland)

Brand Name:KY

High Speed Carbon Steel Shaft Forging , Mandrel And Transmission Shaft Specifications: Material 45#, 35CrMo, 42CrMo, 40Cr, 34CrMo4, 40CrMnMo, 30CrNiMo, ect. Size Diameter:200-750mm Length:...

Brand Name:Kingpo

Model Number:EN ISO 5356-1:2015

Place of Origin:China

EN ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test gauge according to Figure A.1 and Table A.1, by applying an axial force of (35...

Brand Name:iqualitrol

Model Number:ASR-5630

Three Stations Shaft Key Life Tester ASR-5630 with Power Off Memory Brief Introduction: The iqualitrol ASR-5630 is suitable for the life aging test of key switches, ...

Brand Name:BLM

Model Number:standard or customized

Place of Origin:Jiangsu, China

... geometric shapes (such as the number of thread heads, pitch, rotation direction, etc.). Due to its modular nature, this design is also known as a "building block" screw. The mandrel, often also referred to as the screw mandrel or main shaft, is a

Brand Name:Infinity Machine

Model Number:RS-8105D-45°

Place of Origin:Made in China

Double-station Electronic Product Cable Tester , Conical Tester Endurance Life Test Model: RS-8105D-45° Purpose: This machine is suitable for the endurance life test of charge cable and headphone cable in a rotation angle of 45 degrees, applicable in ...

Brand Name:HEZHI

Model Number:N/A

Place of Origin:China

...Maximum mandrel diameter) This parameter describes the maximum diameter of a spring shaft in industrial applications. De (outsole diameter) : outside diameter of the widest end of the spring. De (small bottom outside diameter) : outside diameter of the

Brand Name:Techcore

Model Number:MTV 5150015

Place of Origin:CHINA

... the well by lifting and lowering the drill pipe or tubing to control the ball valve of the tester valve. The tester valve is closed while the tool is running in hole. When the tool reached the predetermined depth, J-slot mandrel will move up and down

Brand Name:LYHX

Model Number:S02

Place of Origin:CN;HEN

... to the bearing capacity of the shaft, and can be divided into: (1) the shaft, working under the bending moment and bear torque, is the most common shaft in the machinery, such as all kinds of reducer shaft. (2) mandrel, used to support the rotating parts

Brand Name:Pego Tester

Model Number:PG-MTD

Place of Origin:China

IEC61558 Electrical Safety Test Equipment Mandrel Test Device equipped with 150N load 1. Introduction Mandrel tester device is designed and manufactured in accordance with the standard requirements of IEC61558 and IEC60065. It is used for the insulating...

Model Number:EBM7C004

EBM7C004 MICRO FINE CONICAL 0.40MM ESD Wrist Strap Tester We can supply EBM7C004 , send us a request quote to request EBM7C004 pirce and lead time.www.henkochips.com a professional electronic ...

Brand Name:Haida

Model Number:8038-HD

Place of Origin:China

Sealing Negative Pressure Tester Description: Syringe Sliding Performance Tester is an instrument specially designed to measure the sliding resistance of the syringe mandrel in the syringe barrel, which plays an important role in the medical device ...

Brand Name:Kingrail

Model Number:BA025

Place of Origin:China

...conical shafts are widely used in cone crushers, jaw crushers, impact crushers, Raymond mills, as main shafts. Our main shafts are usually made of high-grade forged steel. Our conical shafts can meet DIN, GB, ISO, JIS, BA, ANSI, and other standards. As a professional manufacturer, we can also customize conical shafts according to customer specifications and requirements. Specifications: Product Name cone crusher main shaft...

Brand Name:penghao

Model Number:54H

Place of Origin:CHINA

54h Dental Straight HP Steel Mandrels for Separating Discc Specifications mandrels for disc, shaft HP/RA, bender spare part. stainless steel reinforced Description mandrels for disc, rotary tool, shaft hp/ra, bender spare part. crew type, head (screw) ...

Brand Name:Trancar Industries

Model Number:TCM-CR

Place of Origin:China

...shafts cone hydraulic bending machine conical banding maschine How to form cones,conical tank caps and conical dish head with TCM Three shafts cone hydraulic bending machine conical banding maschine? Trancar Industries Model TCM-CR series hydraulic steel cone bending machine is designed for making folding steel conical tank caps,conical...