single flute carbide end mill

Brand Name:Betalent

Model Number:CNC router bit down cut

Place of Origin:China

... resistance, for cutting compact laminated boards, plexiglass and aluminum sheets (alucobond), widely applied in furnature factory. Advantage: 1,Specially single flute design with up cut function, mirror polishing blades. 2,Nice machining finish surface ,

Model Number:SF600

Place of Origin:MADE IN CHINA

Brand Name:KTC

... - Allows for better part finish in harder materials Multiple Flutes - Allows for an even better part finish in harder materials As the number of cutting edges increases, your feed rate should increase to prevent burning and premature ...

Brand Name:RLD Tools

Model Number:HRC55

Place of Origin:China

...Flutes Solid Carbide End Mill Cutter for Steel 6mm Carbide Mill End mills are used for carving out pockets, for producing grooves or contours, as well as for milling over surfaces or edges. With a finishing cutter, very good dimensional accuracy and a smooth surface can be achieved at high speeds and at a low feed rate. Product name RLD HRC55 6mm Diameter 4 Flute Carbide End Mill...

Brand Name:SUPAL

Place of Origin:Changzhou,Jiangsu,China

Model Number:OEM

Single Flute Carbide End Mill Diameter 3.175mm Tungsten Carbide Material Material: Carbide, uncoated Flute quantity: 1 Head Diameter: d=1mm 1.5mm 2mm 2.5mm 3.175mm Shank Diameter: D=3.175mm 3.175mm 3.175mm 3.175mm 3.175mm ...

Place of Origin:Shandong, China

Brand Name:yingba

Model Number:3.175-12mm

Number Shank diameter Edge diameter Blade length Total length JKDR3-1-3 3.175 1 3 38 JKDR3-1-5 3.175 1 5 38 JKDR3-1.5-6 3.175 1.5 6 38 JKDR3-1.5-8 3.175 1.5 8 38 JKDR3-1.5-12 3.175 1.5 12 38 JKDR3-2-8 3.175 2 8 38 JKDR3-2-12 3.175 2 12 38 JKDR3-2-17 3.175...

Brand Name:CTCB-AP

Model Number:single flute

Place of Origin:Hunan,China

...Carbide Cutting Tools of Single Flute Spiral End Mill For Wood Router Machine CNC milling of aluminum can be difficult,as aluminium would stick to the flute and the chips would pack. Single Flute Carbide End Mill for aluminum have large flute to yield the maximum metal removal rates possible. They also feature eccentric grinding on the outside diameters of the bits to give them strength and stability, and large flute...

Brand Name:Jin Tai Pai

Model Number:D1-D20 OEM service available

Place of Origin:China

...Carbide Single Flute Spiral End Mill For Milling Cutter Feature 1. Good Surface 2. High Precision 3. Good Performance 4. Certification: ISO9001:2008, Supplier Assessment Certificate Specifications HRC 60 solid carbide end mill Blade diameter range from 0.5mm to 10 mm, spiral angle 30 degree, hardness HRC 60. Fine tungsten carbide...

Brand Name:AMG

Place of Origin:CHINA

...Flute Carbide End Mill for Steel High Performance CNC Milling Cutter for Hardened Steel Stainless Alloys Introduction: The AlTiCrN Coated 5-Flute Carbide End Mill is a premium cutting tool engineered for high-efficiency machining of steel, hardened alloys, and stainless steel. Featuring an advanced AlTiCrN (Aluminum-Titanium-Chromium-Nitride) coating and 5-flute design, this end mill...

Brand Name:Seego Carbide

Model Number:Tungsten Carbide Square Head End Mills

Place of Origin:Hunan of China

...Carbide End Mills with 4 Flutes ALTiN Coating for High Cutting Temperature​ Discription: Four flute square end mills with straight flutes are single ended, have four cuttting edges, and have a zero degree helix. They are used to mill plastics, composites of epoxy and glass, and are also used for special profile milling applications. The straight flute...

Place of Origin:Sichuan, China

Brand Name:Kedel

Model Number:KD-FSA10100A

... Steel/Stainless steel/Alloy steel/Cast Iron/Aluminum HRC HRC 45-65 MOQ 1 Piece Shape of Flute Flat End Flute 2/3/4/5/6 Flute Diameter 0.1-25mm Shank Diameter 4-25mm HRC 45/55/60/65 FAQ 1.

Brand Name:VKD

Place of Origin:zhuzhou

Model Number:Standard Size

... wear resistance. 3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling. Wave edge end Mill Tool material composition: 1. Physical Properties: a. Hardness greater than or equal to

Brand Name:KTS

Model Number:Ball Nose

Place of Origin:SICHUAN, CHINA

... understand the milling knowledge When optimizing the milling effect, the blade of the milling cutter is another important factor. In any milling, if there are more than one blades participating in the cutting at the same time, it is an advantage, but too

Brand Name:Zhuzhou Shield

Model Number:2 flute

Place of Origin:Zhuzhou, China(Mainland)

...carbide lasting long life in hardened steels, Grain size carbide, high toughness,high-wearing feature. 2. Non-standard can be customized according to customer's requirements 3. We have produce ability to satisfy your orders,another ...

Brand Name:MMM

Model Number:Various

Place of Origin:CHINA

... milling and side milling with high efficiency advantages. Thesolid carbide end mill can be reground and has the characteristics of repair and reuse, further reducing costs. This series of mills are divided into 2 blades, 3 blades, 4 blades and 6 blades.

Brand Name:AMG

Model Number:Standard/Customized

Place of Origin:China

...Flutes Carbide End Mill For Aluminium Customized Finishing CNC Milling Cutter AMG four blade aluminum hard alloy milling cutter is designed specifically for high-speed and precision cavity machining of aluminum parts, and is widely used in the aerospace, automotive parts, and mold manufacturing industries. It is suitable for high-strength aluminum alloy materials such as 6061, 7075, and 7050. Compared to three blade aluminum milling

Brand Name:TS

Model Number:D6*F15*50L*C6*3T

Place of Origin:CHINA

...Carbide 3 Flutes D6 Square End Mills For Copper Electrode Square end mills for For Copper Electrode has a sharp flute edge. it is particularly advantageous for higher speed operations in a variety of aluminum machining applications. End Mills for For Copper Electrode select high-quality carbide materials, advanced manufacturing technology, additional higher standard of finishing rld rainbow coating. Material: Tungsten Carbide

Brand Name:INMIND

Model Number:4mm to 20mm roughing end mill

Place of Origin:China

...end mills 4mm to 20mm 4 Flute The name of product Solid Carbide End Mills & Tungsten Carbide HRC60 Roughing END MILL Type solid carbide R endmills,solid carbide flattened endmills solid carbide ball nose endmills, long neck end mill,Micro end mill , Model Number Various Helix angle 25-30 ° Place of Origin China (Mainland) Usage Milling...

Brand Name:OEM

Model Number:various

Place of Origin:China

...Flutes Tungsten Carbide Aluminum Cutting Tools End Mill Product Description Product Name 3 Flutes Tungsten Carbide Aluminum Cutting Tools End Mill Workpiece Material Aluminum/ Copper Alloys/Heat-resistant alloys/Plastics Application Side Face/ Step Shoulder/ Straight Slot /Deep Slot OEM/ODM Applicable Tolerance ±0.01 Flutes 3 Flute...

Brand Name:Sanyinghe

Model Number:D4/6/8/10/12/16/20mm

Place of Origin:Zhuzhou,China

...Flute Carbide Flat Milling Cutter Tungsten Cnc Mills Cutter End Mill For Steel Iron PRODUCT DESCRIPTION TOOLS FEATURE: Good wear resistance, long working life. COATING: High performance AlTiN coating, High temperature and wear resistance EDGE PRECISION PASSIVATION: Improve tool life and workpiece surface finish. Product Name Carbide End Mills Material Carbide...

Brand Name:ZCCCT

Model Number:AL-3E-D12.0

Place of Origin:Zhuzhou

...flutes aluminium end cutter AL-3E-D12.0 Model Number: AL-3E-D12.0 Features: (1) Professional, Very Good strength and intensity, High cleaners & durability, Long service life; (2) Special design, combined hard cutter body and high-class cutting edge, ZCCCT aluminium end mills 　 Model Number AL-3E-D12.0 Workpiece Aluminium Overall Length 75MM Flute...