sintering nickel tungsten alloy

Brand Name:JX

Model Number:Pure Tungsten Rod

Place of Origin:China

Pure Tungsten Rod Pure tungsten rods are made from pure tungsten powder, which is usually quite high in purity, 99.95%. Tungsten metal can be processed by forging, extrusion, drawing, rolling, etc. Pure tungsten ingots use tungsten powder as raw material...

Brand Name:PRM

Model Number:custom

Place of Origin:China

... alloy rod is to press and sinter the tungsten alloy powder in the billet, and then roll it into a rod shape. Smaller sizes can only be made according to subsequent drawings. The tungsten-nickel-iron alloy rod can be manufactured in any length. We can also

Brand Name:Forged

Model Number:customized

Place of Origin:Luoyang Henan, China

..., some ferromagnetism has good plasticity and machinability of good thermal conductivity and conductivity, some gamma ray or X-ray absorption capacity. Application Use of tungsten-nickel-iron alloy application is very wide, has become

Brand Name:Sanhui

Model Number:Customized

Place of Origin:China

Tungsten Alloy Tungsten Nickel Iron Tungsten Nickel Copper with Density of 15.8-18.5g/cm3 Tungsten Alloy General Introduction: 1. Dimension: According to customers' requirements 2. Density: 15.8-18.50 g/cm3 3. Composition: W content: 85-97%, W-Ni-Fe 4. Surface: Sinter state, finish state 5. Application: Balance Weight,Medical Shielding,Aviation Electron System Tungsten Alloy Specification: Product Name Tungsten alloy WNiFe WNiCu Material Tungsten

Brand Name:Rixin

Model Number:K20

Place of Origin:China

... scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to

Brand Name:Eternal Bliss

Model Number:EB9332

Place of Origin:China

...Tungsten Steel Balls Tungsten Nickel Iron Alloy Ball Pure Tungsten Ball Pure tungsten ball Tungsten steel ball for high specific weight counterweight tungsten nickel iron alloy ball 1. Density: 17.8-18.5g / cm3 2. Composition: tungsten content: 85-99%, tungsten-nickel-iron, tungsten-nickel-copper 3. Surface: sintered, polished surface, polished surface Features and applications: The tungsten alloy...

Brand Name:PRM

Model Number:WMo alloy

Place of Origin:China

...molybdenum is referred to as tungsten-molybdenum alloy.The tungsten content in commonly used tungsten-molybdenum alloys is 30% to 50% (by mass). Similar to metal molybdenum material and molybdenum alloys, tungsten-molybdenum alloys are made by sintered and

Brand Name:BLM

Model Number:standard or customized

Place of Origin:Jiangsu, China

... alloy, tungsten carbide alloy, cobalt base alloy and H.I.P liner sleeve. We have provided super wear-resistant high corrosion resistance bushing for many domestic and foreign parallel twin-screw ...

Brand Name:JWE

Model Number:N/A

Place of Origin:Zhuzhou, China

...WC, TiC) micron powder with cobalt (Co) or nickel (Ni), molybdenum (Mo) as a binder in vacuum furnace or Sintered powder metallurgy products in hydrogen reduction furnace, nowadays common cemented carbides have YG, YN, YT, YW series ...

Model Number:Silver-Tungsten Alloys Plate

.... Because the melting points of tungsten and silver are very different. Like tungsten-copper alloys, silver-tungsten alloys cannot be produced by traditional casting methods. Our process route is powder preparation - pressing - sintering - infiltration -

Brand Name:Ruideer

Model Number:600mm × 600mm × 1200mm

Place of Origin:China

Metal Sintering Furnace For Heat Treatment Of Tungsten Alloy, Titanium Alloys Functions: * positive pressure leak detection * negative pressure leak detection * Vacuum sintering * Partial sintering * Vacuum cooling * Rapid cooling Systems: * Electrical ...

Place of Origin:China

Brand Name:Satellite

Model Number:W-Ni-Fe,W-Ni-Cu,W-Ni-Cu-Fe

... contents and rod sizes. Usually we provide products according to clients' specific demands. We can also offer a range of different tungsten alloys, including W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe, up to the particular requirement for that high-density alloy.

Brand Name:Sanxin

Model Number:SX1198

Place of Origin:China

...Tungsten Alloy Rod Tungsten Steel Round Bar With Nickel And Ferrum(Fe) Introduction of High Density Tungsten Alloy Rod composition:W90NiFe4 Application of Tungsten bars W90NiFe4:for making tools Surface:polished or as customers' requirement Size:10~30mm or customized Other similar products: WNiCu alloy...

Brand Name:VKD

Model Number:Cu70w30

Place of Origin:zhuzhou

...Tungsten Alloy With High Thermal Conductivity ASTM B702 Standard Tungsten Copper : Tungsten-Copper alloy is the composite of Tungsten and Copper. It is used widely in such industries as engine, electrical power, electron, metallurgy, spaceflight and aviation. Using CIP formation, sintered tungsten skeleton and infiltrating copper (silver) technology, large size and special shape products of tungsten...

Brand Name:Sifon

Model Number:90-97WNiFe

Place of Origin:China

...tungsten nickel iron alloy plate tungsten alloy sheet for radiation Products detail: Tungsten alloy is used in many radiation-shielding applications including industrial, nuclear and medical. Because of its high density and high atomic number, is an effective construction material for shielding against gamma rays and x-rays. Lead and boron carbide can shield radiation too, but cannot perform as well as tungsten alloy...

Brand Name:Inconel 625 Powder

Model Number:Inconel 625 Powder

Place of Origin:China

...Nickel Base Alloy Powder is a high-quality metal powder that is composed of a variety of elements to achieve specific properties and characteristics. This powder is primarily composed of Nickel (Ni), along with Chromium (Cr), Molybdenum (Mo), Iron (Fe), Cobalt (Co), Tungsten...

Brand Name:Huitong

Model Number:Huitong

Place of Origin:China

Sintered Nickel Fiber Media For AEM And ALK Environments Nickel provides corrosion resistance, mechanical support, and electrical conductivity to AEM applications. This metal’s characteristics ensure durability in alkaline environments over the electrolyzer’s lifespan. Our nickel PTL is suitable for the high pH values of AEM technology. And it is available in thicknesses up to 1mm, depending on design constraints. We also offer alloys...

Place of Origin:Zhuzhou，Hunan，China（mainland）

Brand Name:Gold Sword

... kinds of wood. With high quality raw material and advanced equipment, G.S.carbide provides customer superior quality carbide Hard Alloy Strips . 1. Easy to be brazed, good wear resistance and toughness. 2. Untrafine grain size raw material to