small ingot

Model Number:Aluminum Ingot

Place of Origin:China

Brand Name:Silk

... Alloy Zinc Ingot Tin Ingot Lead Ingots Aluminum-silicon (Al-Si) alloy, the mass fraction of Si is generally 4%~22%. Since Al-Si alloy has excellent casting properties, such as good fluidity, good air tightness, small shrinkage rate and small warm tendency...

Brand Name:Hilbo

Model Number:AM50 alloy ingot

Place of Origin:China

... thickness can be small 0.6mm, which is plastic products can not be achieved under the same strength, aluminum can only be 1.2 ~ 1.5mm The range can be compared with the magnesium alloy. Our company export Mg products from 2004, including Mg ingot, alloy,

Brand Name:HIGH BROAD

Model Number:MgGd

Place of Origin:CHINA

... earth Ca/RE≥99.95%. 3, Using special crucible in the process of production and gas protection to strictly control the impurity content 4, Small ingot and large surface area, uniform composition, no need to be broken and easy to

Brand Name:YUTAI

Model Number:Copper Ingots

Place of Origin:China

...is used to operate small melting furnaces. These copper ingots are known for being an excellent conductor of heat. They are mainly used for making ingots for being malleable and ductile. Specification Cooper (Cu) 99.951- 99.991% Lead (Pb) 0.00% Zinc (Zn)

Brand Name:Senyilu

Place of Origin:China

...aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called a light metal. A356 Aluminium Alloy Ingots is widely used alloy in Sand casting process to make critical components in various Engineering and Automotive Industry,

Brand Name:Silk

Model Number:A8 99.8% 99.7% a7a8

Place of Origin:China

... of aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called a light metal. Aluminum is a non-ferrous metal that is second only to steel in production and ...

Brand Name:Silk

Place of Origin:CHINA

...a small density, only 34.61% of iron and 30.33% of copper, so it is also called light metal. Aluminum is a non-ferrous metal whose output and consumption are ...

Brand Name:MENTEK

Model Number:YC-18-ESS

Place of Origin:China

...Small Size Thermal Cycling Testing Chamber 10℃~20℃/min Rapid-rate With Heat Load 10kg Aluminum Ingot The small size rapid temperature change test chamber is a kind of test equipment that simulates the rapid heating and cooling test environment within a small...

Brand Name:IRIS

Model Number:1000KG

Place of Origin:China

Small Foundry Production Billet Cast Iron Copper Wire Aluminum Ingots Aluminum Foil Induction Melting Furnace Product Description Small foundry production billet cast iron copper wire aluminum ingots aluminum foil induction melting furnace feature as ...

Brand Name:lincheng

Model Number:LC-WZP-160

Place of Origin:Shenyang, China

... and equipment that melts metal ingots and some waste metals and adds the required alloy components, and melts them into necessary aluminum alloys through slag scraping, refining and other practical operations. The ...

Brand Name:SP

Model Number:GW-1.5

Place of Origin:China

... speed of melting, saving energy, less burnt loss, pure molten liquid. 3. The aluminum frame of casting smelting furnace is adopted to small capacity smelting furnace with reasonable structure and small capacity,

Brand Name:Silk

Place of Origin:CHINA

Metal Molding Groove Ingot Mould Oil Chisel Gold Silver Casting Jewelry Tool SIZE Weight Diameter Depth Sheet Size SMALL 1080g 4/5/6/8mm 62mm 62*50*2mm MEDIM 2104g 5/7/9/11/13mm 80mm 80*60*5.6mm LARGE 3629g 4/6/8/10/12mm 120mm 120*100*7.8mm FAQ 1. who are...

Brand Name:YaFu

Model Number:YF-20112102

Place of Origin:China(Mainland)

... gold edging, elegant and stylish, clear, refracting different brilliance. 4. Hammer texture, undulating edge of the bowl, three large, medium and small,

Brand Name:zmkj

Model Number:dia12x2.5mmt

Place of Origin:china

...plate for bearing ,optical glass lens by sapphire ,0.1mm thickness sapphire wafer ,optical glass ingots by sapphire ,sapphire optical rods,Sapphire small lens,sapphire bearing 1. What's Sapphire? What advantage sapphire have? Sapphire is a hard crystal,it ...

Place of Origin:Jiangsu, China

Brand Name:Wanshida

Model Number:Y83-2500

...small Scrap Metal Sawdust Briquetting Presses This Y83-2500 china scrap metal sawdust briquetting presses is mainly applied in the aluminum alloy section plant, steel casting foundry, aluminum casting factory, copper casting plant, etc. It compresses the waste metal into briquette for melting again instead of the scrap steel, pig iron, aluminum ingot...

Brand Name:Tunxin

Model Number:CL-710

Place of Origin:China

... material and industrial material 4 Price: Based on CCMN Aluminium Ingot price(www.ccmn.cn) + processing Fee 5 Payment term: T/T, L/C at sight 6 Surface treatment: Anodizing, Powder coating, electrophoresis, ...

Brand Name:OHMALLOY

Model Number:1J50

Place of Origin:China(Shanghai)

Ohmalloy-1J50 is a nickel–iron magnetic alloy, with about 50% nickel and 48% iron content. It is derived in accordance with permalloy. It has characteristics of high permeability and high saturation magnetic flux density. Alloy melting in a vacuum medium, ...

Brand Name:Chuangxiang

Model Number:6-FM-6.5

Place of Origin:Chongqing China

Advantage of Chuangxiang motorcycle battery Plate: Adopt unique formula improving utilization of active material in plate, in addition, high pure lead ingot(#1 lead purity is 99.99%) as raw material, so high cold cranking performance and low self discharge...

Place of Origin:Hunan, China (Mainland)

Brand Name:SHENGANG Magnet Excavator

Model Number:MW5-150L/1 Magnet Excavator

Application: Lifting Electromagnet is used for transporting Iron scraps,Ingots,Pig Iron,Machine Chip,Return scraps,Baling scraps, Various kinds of steel scraps.This magnet is special designed for excavator installation, replace the bucket with magnet, so...

Place of Origin:China

Brand Name:Anyang

Model Number:G42

...ingot, square ingot, section material. The structure of sawing machine is reasonable with stable and reliable performance and high precision. And incision is narrow and waste is small. It is narrow and waste is small. It is an ideal equipment for middle and small...