solvent butyl glyco polyester resin

Brand Name:Allnex

Model Number:SETAL 6306 SS-60

Place of Origin:CHINA

Solvent Butyl Glyco Polyester Resin Acrylic Polyol SETAL 6306 SS-60 1, General Description SETAL 6306 SS-60 is An acrylic resin (calculated on non-volatiles). SOLVENT COMPOSITION Butyl acetate 2, Technical Features: Water-soluble after neutralisation, good...

Brand Name:YoChon

Model Number:YC-AC-181218-29(YC8533)

Place of Origin:Anhui(China)

... of saturated polyester resin, initiator, accelerator, filler, thixotropic agent and so on. The polyester resin produced by our company is mainly used for the coating of metal parts, and is widely used in household appliances, instruments, auto parts,

Brand Name:RISING

Model Number:RP2006

Place of Origin:Shaoguan,China

...Polyester Resin For Deep Drawing Coatings Features: RP2006 is a saturated polyester resin, characterized by good flexibility, good adhesion, and good compatibility with acrylic resin. Quality index: Item Specifications Appearance Little yellow translucent viscous liquid Functionality 2 Solid content 55±2% Acid value ≤3 mgKOH/g Viscosity 4000-8000cps/25℃ Chromaticity ≤ 2 Solvent S-150 Aromatic Solvent

Brand Name:WeiLi Resin®

Model Number:SA-1324

Place of Origin:China

...alternative to DEGALAN® LP 64/12N. SA-1324 acrylic resin is polymer based on methyl methacrylate and butyl methacrylate, it has good adhesion and flexibility and good dispersivity and leveling, good weather resistance, colorfastness and high gloss. It is

Brand Name:Hsinda

Model Number:pp

Place of Origin:SC

... no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low hehigh gloss mirror chrome sliver ...

Brand Name:EXCEEDCHEM

Model Number:MBTO

Place of Origin:CHINA

Polyester Resin Monobutyltin Oxide MBTO Polyurethane Additives CAS 2273-43-0 1. Component Monobutyltin oxide (MBTO) Chemical Structure: M.F.: C4H10O2Sn M.W.: 208.8 CAS No.: 2273-43-0 EINECS No.: 218-880-1 2. Properties Appearance White powder Tin Content (wt%) 56-57% Cl Content (wt%) ≤1.0 Loss on drying (wt%) ≤1.0 Di-organotin Content (wt%) ≤0.3 Tri-organotin Content (wt%) ≤0.1 Solubility Insoluble in water and most organic solvents...

Brand Name:Jingtu

Place of Origin:China

Our Customized Color Skin Textured Powder Coat is a high-performance, environmentally friendly coating designed to provide durable and aesthetically appealing finishes for various metal applications. It is a 100% solid powder coating without solvents, ...

Brand Name:WeiLi Resin®

Model Number:SA-236-1

Place of Origin:China

...resin SA-236-1 Product Description Solid acrylic resin SA-236-1 is similar to PARALOID™B-66, it is a fast-drying copolymer of methyl methacrylate and n-butyl methacrylate. It offers hard heat resistance and durability, helping aerosol coatings form smooth, long-lasting films on metal, plastic, and wood surfaces. It is an excellent general-purpose resin with the same characteristics as the solution grade. In appropriate solvents...

Brand Name:DR

Model Number:DR-723

Place of Origin:Made in China

...100 Solid content % 35±2 35±2 Viscosity mPaS/35℃ 5000-15000 5000-15000 Solvent composition Cyclohexanone/butyl acetate/alcohols Cyclohexanone/butyl acetate/alcohols Tensile strength Mpa ≥ 45 ≥ 40 100% modulus Mpa 5-7 6-8 Elongation % ≥ 750 ≥

Brand Name:Direction Chemical

Model Number:Lucite E-2016 (DY2066)

Place of Origin:China

... as ketone, esters, aromatic hydrocarbons, chlorinated solvents and higher alcohol etc. Ⅲ. Properties: DY2066 is a multipurpose thermoplastic acrylic resin which is made from butyl methacrylate monomers by copolymerization. DY2066 has high purity, its

Brand Name:UPTOGETHER

Model Number:P19

Place of Origin:Jiangsu, China (Mainland)

DQ series of primer for cold applied tape is is made up of butyl rubber, unsaponifiable resins, tackifier, stabilizer, and solvent.The primer is applied to the appropriately prepared pipe surface before application of anti corrosion tape. It is used for ...

Brand Name:Solvent Red 24

Model Number:SZ-MM

Place of Origin:CHINA

...Solvent Red 52 CAS 81-39-0 C24H18N2O2 Plastic Coloring Introduction: Purple red crystal, melting point 269-270 ℃. Dissolve in water. It appears dark red in concentrated sulfuric acid and produces a red precipitate after dilution. Uses: Used for coloring various resin plastics, such as polyacrylic acid resin, polystyrene, ABS resin, organic glass, polyester resin...

Brand Name:Lubekote

Model Number:xxxxx

Place of Origin:China

...other thermosetting resins. It is a mixed solvent for advanced polymeric resins. It provides a hard and durable film capable of providing multiple demoulding after each use without contaminating the mold surface. Especially for products without gelcoat.

Brand Name:Briture

Model Number:BZ-11

Place of Origin:China

Co-Solvent Polyamide Resin 1. Appearance: Yellowish granular transparent solid. 2. Product Description: The molecule of benzene soluble polyamide resin contains long fatty hydrocarbon carbonic chain. Its fine flexibility endows inks with good adhesive ...

Categories:Pvc Shrink Film Bags

Country/Region:china

...mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking ...

Brand Name:TUNSING

Model Number:DS0022

Place of Origin:China

Quick detail of polyamide hot melt adhesive: Polyamide hot melt adhesive is a thermoplastic film modified hot melt adhesive, entrusted to the release of paper, can be repeatedly heated plasticizing bonding.This kind of hot melt adhesive has a wide range...

Model Number:D series

Place of Origin:CHINA

... Tissue/Bopp/Polyester/Cloth Fabric As Carrier Product description Double Sided Adhesive Tapes use non-woven tissue/BOPP/Polyester/cloth fabric as carrier, coated with hot-melt rubber-resin adhesive/water-based acrylic adhesive/solvent acrylic adhesive on ...

Brand Name:Feihong

Model Number:Ral7032

Place of Origin:Ukraine

1.General introduction: Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking heat ...