spring tester calibration

Brand Name:Sinuo

Model Number:SN2208

Place of Origin:China

... of IEC60068-2-75:1997 Annex B, IEC60068-2-63:1997 Annex A, and etc. The device is used to detect the impact energy of the Spiring Hammer Tester. When the spring hammer is released, it impacts on the pendulum rod on the

Brand Name:Yunyi

Model Number:YS series

Place of Origin:China

... standard which uses a piston cylinder on which a load is placed to make an equilibrium with an applied pressure underneath the piston.Deadweight testers are so called primary standards which means that the pressure measured by a deadweight tester is

Place of Origin:Wuhan Hubei China

Brand Name:Huaying

Model Number:Huaying Series

...tester calibrator system JY-100 2. Equipment Description: 1 Breakdown voltage error calibration for insulating oil tester 2 High voltage measurement error calibration for insulating oil tester 3 Voltage rise rate error calibration for insulating oil tester 4 High voltage cut off time measurement for insulating oil tester...

Place of Origin:Wuhan,Hubei,China

Brand Name:Huaying

...rise rate error calibration for insulating oil tester 4 High voltage cut off time measurement for insulating oil tester 5 High voltage distortion rate measurement 1 High voltage measurement: 0-80kv/0-100kv 2 High voltage measurement error: 0.2%RDG+0....

Brand Name:cartesykj

Place of Origin:China

...tester calibration Product Overview A dial indicator is a high-precision mechanical displacement measurement tool commonly used for the calibration of side slip testers. It measures the slight lateral displacement of the slip plate under static load conditions, allowing users to assess whether the tester...

Brand Name:Huatec

Model Number:HG-5010

Place of Origin:China

... instruments. Standard sine signals at frequency 10, 20, 40, 80, 160, 320, 640 and 1280 Hz 2.Can be generated from the calibrator the amplitude of the acceleration,

Brand Name:KingPo

Model Number:KP-SHC27

Place of Origin:China

IEC60068-2-75 / GB2423.55 Standard Spring Hammer Calibration Device for Spring Hammer Calibration Product Description: Spring impact hammer calibrator is based on all parts IEC60068-2-75 Appendix B requirements of normative documents tolerance ...

Place of Origin:China

Brand Name:HongCe

Model Number:CSH-1

... hammer. It is the special equipment for the laboratory. Because it is difficult to measure directly for the offered energy of the calibrated spring hammer, the calibration principle of this device is by comparing the energy which is calculated by the

Brand Name:PEGO Electronics

Model Number:PG-SHCC

Place of Origin:China

...75 Annex B.3 and figure B.5 for checking the impact energy accuracy of spring hammer calibration device. The calibation is made with an impact energy of 1J, which is achieved with a height of fall of 408±1mm, with a calibation striking element of 250g. 2.

Brand Name:SADT

Model Number:-

Place of Origin:China

Hardness Calibration TEST BLOCK Block Standard hardness blocks are used for calibrating hardness tester, it can check whether the readings of the hardness tester are within the scope of the international standards. Each hardness block is engraved with ...

Brand Name:GENY

Model Number:YC-1891D

Place of Origin:CHINA

...: 1P2W Testing mode: active power, reactive power, cross connected reactive power With current output switch, can calibrate 2 element meter With MSVT, can test single-phase meters with closed links between the current and voltage measuring circuits (I-P

Brand Name:TMTeck

Model Number:D

Place of Origin:China

D type test block, calibrate block for calibrate the hardness test Features: Our company sells Leeb standard hardness blocks for a long time. Material: bearing steel Uses: Standard test block calibration instrument Size: Diameter: 90mm, Thickness: 50mm ...

Brand Name:LONROY

Place of Origin:Guangdong, China

Spring Mechanical Property Tester Spring Tensile and Compression Testing Machine Spring Tester Factory Price Product Description I. Product Description: This testing machine is manufactured in accordance with the technical requirements stipulated in JB/T7796-1995 "Technical Conditions for Spring Tensile and Compression Testing Machines". It is mainly used for testing the strength of various precision helical springs...

Brand Name:PERFECT

Model Number:PT-3166

Place of Origin:Guangdong,China

...porous elastic material compression depression hardness test, such as foam. Parameters: Tester Name 2000N Wire Tensile PC Testing Machine Manual Leather Spring Tester Servo Model No. PT-3166 Capacity 200kgf, 2KN Software Professional testing software under

Brand Name:iqualitrol

Model Number:ATH-30

...Spring Tester Operation Manual Download: iqualitrol ATH Spring Tester Machine Manual Function: The ATH spring pull pressure test stand is specially design for measuring the stretches and compression distortion value of spring, and the load relations characteristic.It is applied in measuring the working load of spring when it on the certain length stretched and compressed. Features: 1:Test spring...

Brand Name:NOBO

Model Number:Machine Spare Parts

Place of Origin:Foshan,china

...Bolt,Spring Tester. Herstelland CHINA Manufacturer NOBO MACHINERY Quality High Quality And New Parets Name 1 A.C. Contactor Parets Name 2 Aluminium Alloy Tower Bolt Parets Name 3 Spring Tester NOBO(mattress) machinery co.,ltd Company Profile NOBO(mattress)

Brand Name:ZL

Model Number:ZL-2101

Place of Origin:CHINA

...Spring Tester , High Speed Regulation Precision Category: Computer control spring tension and compression testing machine name: (50 - 5000) N small microcomputer controlled spring testing machine Spring testing machine is also called [spring tension and compression testing machine], [spring] [tensile test machine, spring pressure testing machine], [] [the tension of the spring machine, spring press], [] spring

Brand Name:Infinity Machine

Model Number:RS-8108

Place of Origin:Made in China

Computerised Torsion Spring Tester 360° ASTM A 938-2004 Electric Type Model: RS-8108 Purpose: This tester is suitable for the twist strength testing of metal wires and the cable isolation layer, put one end of specimen on the fixture and fix it, and twist...

Place of Origin:CHINA

Brand Name:XY

Model Number:Y047,Y055

Product Description Calibration helper ■The Floating Ball type Dead-weight Pressure Tester is a new model of Pressure primary Standard, with nitrogen or instrument used (purified) compressed air as power and can give out a precision pneumatic pressure ...