standard component film testing tool

Brand Name:LONROY

Place of Origin:Guangdong, China

Model Number:LR-S003

...Standard Component Film Testing Equipment Testing Equipment Film Testing Equipment Film Testing Equ Spring impact hammer standard component Basic introduction: The spring impact hammer calibration device is a laboratory special device, mainly used for the calibration of the spring impact hammer, it is designed and manufactured according to IEC60068-2-75-1997 and GB2423.55-2006 standards...

Model Number:SIEVE

Perforated plate standard sieve 300mm diameter Aperture size stainless steel standard sieve 75mm stainles steel standard sieve 63mm stainless steel standard sieve 50mm stainless steel standard sieve 37.5mm stainless steel standard sieve 28mm stainless ...

Brand Name:HICORPWELL

Model Number:4"and 5" Round Type 3 Mico Meter D Fiber Optic Polish Lapping Film

Place of Origin:China

... Polishing Films Fiber Testing Tools 5" Discs Connector Polishing Consumables This polishing film adopts advanced coating technology to evenly apply micron or nano abrasive particles with macromolecular medium on high-intensity films. Precisely cut...

Brand Name:ERIKC , For BOS

Model Number:Injector Valve Assembly Sealing Test tool

Place of Origin:China

...Tool Components Common Rail Valve Assembly Electrical Valve Plate Sealing Test Tool For BOS ------- ♦ Product Introduction Item: Injector Valve Assembly Sealing Test tool Model No.: Injector Valve Assembly Sealing Test tool Application For Injector: Common Rail Injector Car Engine: Diesel Vehicle Size: Standard...

Brand Name:Techcore

Model Number:DST Slip Joint

Place of Origin:CHINA

...accepts the movement associated with ocean heave or temperature change without allowing the movement to disturb the placement of downhole tools. The round mandrel slip joint is designed and manufactured according to NACE MR0175, and suitable for working in

Brand Name:AI

Model Number:AIJLD-10

Place of Origin:CHINA

Performance Characteristics 1.Executive standard: GB/T4074.3-2008,IEC60851-3; 2.Inspection standard: JB/T4279.5-2008 3.This Jerk Test Tool is used to measure the film adhesion property of enameled round wires with nominal conductor diameter of 1.000mm and ...

Brand Name:ZZ TOP OIL TOOLS

Model Number:APR Tools

Place of Origin:China

...Testing Tools String APR DST Tools String The Drill Stem Testing Tools / DST tools manufactured by ZZ Top is full bore type and annular pressure operated, applicable for 4 1/2” to 20” casing, the tools OD is 3 7/8” and 5”, Working pressure upto 105Mpa, working temperature upto 425F. As per NACE MR0175 standard...

Brand Name:ASLI

Model Number:SS-5

Place of Origin:China

...Standard Mechanical Shock Test Machine For Testing SMD Components And Leaded Components MIL-STD-202G standard mechnical shock test machine for testing SMD components and Leaded components is mainly used for small products for impact test, to assess the product’s ability to withstand shock damage. It is often used in electronic components, electronic circuit boards and other environmental testing. Features of MIL-STD-202G standard

Brand Name:Techcore

Model Number:HPHT Drill Stem Testing

Place of Origin:China

.... The drill stem testing tools are applicable for 4 1/2” to 20” casing, the tools OD is 3 7/8” and 5”, Working pressure upto 105Mpa, working temperature upto 425F, the DST tools is designed and manufactured according to NACE MR0175 standard,

Brand Name:HeJin

Model Number:HT-I08

...Test Probe 12 is a precision-engineered tool designed to meet rigorous safety and accessibility testing standards. As an essential component for quality assurance in various industries, this probe is meticulously crafted to ensure accurate and reliable results during product evaluations. With its robust construction and carefully specified dimensions, the Long Pin Test...

Brand Name:JCDRILL

Model Number:SPT

Place of Origin:China

30KN Force Pull Standard Water Well Drilling Tools For Penetration Test Name Standard Penetration Test Structure Light chain/Hand crank on both sides Force of Rated Penetration 3t Depth of Penetration 30m Distance of Penetration 1m ...

Brand Name:HongCe

Place of Origin:China

Model Number:HT-I33

40mm Stainless Steel Test Finger Probe for Hand‑Held Blender Safety Compliance | IEC60335‑2‑14 Standard Test Tool 40mm stainless steel test finger probe, fully compliant with IEC60335‑2‑14, used to verify accidental operation prevention of biased‑off ...

Brand Name:KINSGEO

Model Number:KJ-6040

Place of Origin:CHINA

...coefficient and dynamic friction coefficient of plastic film and thin film(or other similar materials). The supporting control software can intuitively understand the film's smoothness and openness, and show the distribution of the smoothness agent through

Brand Name:DICSCL PARCS

Model Number:vp44

Place of Origin:china

...: TEST BENCH & TOOLS is a high quality product from DIZZO brand, with weight 5kg. It contains CRI 700 common rail injector simulator, CRI ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-M003

Tailor Made Cookware Test Machine , Custom Knives Test Tool Applications & Test Purpose: The machine is used to test bending resistance of different knives. Standard: ISO 8442, ISO8442-2 Standard parameters: Test weights 10N±0.2N ( two) Balance block 89mm...

Brand Name:Sinuo

Model Number:SNM10

Place of Origin:China

IEC 60601-2-52: 2015 Clause 201 Entrapment Test Tools Cone Tool Cylinder Tool Schematic Product Information: 1. Standard: conform to YY9706.252-2021 clause 201.5.101 and IEC60601-2-52:2015 clause201.5.101 and figure 201.103. 2. ...

Brand Name:Aoxing

Model Number:18", 24", 457mm, 610mm

Place of Origin:China

...Testing Tools Product Description SPT split tube sampler Components including ball valve adaptor, split tubes, basket retainer and SPT shoe. SPT Split Tube Sampler is designed for carrying out the Standard Penetration Test (SPT) to BS 1377: Part 9: 1990 and ASTM standards...

Brand Name:New Light

Model Number:AI-7

Place of Origin:China

Full Set Fiber Optic Tools Automatic Fusion Splice Machine Standard 2N Tension Test Professional Fiber Optic Fusion Splicing Equipment Complete automatic fusion splice machine with comprehensive tool set for professional fiber optic cable splicing ...

Brand Name:Shumatt

Model Number:Common Rail Injector Leaking Testing Tools

Place of Origin:China Mainland

...test whether the injector valve assembly meets the technical standards in order to save you time in diagnosinging injector, and provide strong technical support. for the injector. Maintenance & usage 1: Before using diesel parts, please carefully ...

Brand Name:LABTONE

Model Number:G-SKT10D

Place of Origin:CHINA

... change different shock rubber-pad on shock seat. The wave is complete with high repeatability, able to provide user accurate test result. Conform to different test specs such as JESD22-B110 and