steel sphere figure 5 test probe

Brand Name:HJ

Model Number:HT-I05

Place of Origin:China

...Test Finger Probe Figure 5 Test Probe 1 With 50mm Diameter Sphere Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 5 test probe 1. IEC 60529 Degrees of protection provided by enclosures (IP Code) IP1X IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ Application: This sphere...

Brand Name:PEGO

Model Number:PG-TPA

Place of Origin:China

...requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to hazardous parts Test probe A with 50N force is means for the protection of person’s back of hand from hazard parts.

Place of Origin:China

Brand Name:ALLIED TESTING

Model Number:AT TP12

... with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 IEC 60950 and 61032, Figure 9 (Test Probe) Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is plastic, tip is stainless steel.

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I08

... hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use. It meets IEC61032 figure 8 test probe 12. Handle is made of nylon while the tip is made of hardened steel.

Brand Name:Sinuo

Model Number:SN2210-8

Place of Origin:China

IEC 61032 Figure 8 Test Probe 12 Product Overview: This test probe conforms to the standard requirements of IEC 61032 figure 8 test probe 12, etc. This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or ...

Brand Name:KingPo

Place of Origin:China

... to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use. It meets IEC61032 figure 8 test probe 12. Handle is made of nylon while the tip is made of hardened steel. Customizable: It can be used for enclosure

Brand Name:SHC

Model Number:SC-65F4

Place of Origin:China

...Figure 4 Test Hook Probe Product information: The test hook complies with IEC60065. It is used to test whether the dangerous electric parts can be touched. The test hook is “hooked” into vents and seams in the enclosure & then pulled with a force (usually 20N). The hook has a hole at its long end, for use in conjunction with a PFI series Force Gauge. It is made entirely of stainless steel. Technical parameters: Parameters/Model Test...

Brand Name:kerang

Model Number:HT-I06

Place of Origin:CHINA

...5mm or greater. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:Steel ball, rigid test. Parameters: Model HT-I06 HT-I06T Name Test probe 2 steel ball Test probe 2 steel ball with force Steel ball diameter SФ12.5+0.2 0 SФ12.5

Brand Name:kingpo

Place of Origin:china

Model Number:KP-IP4X

...appliance of against electric shock protection test. Technical parameters 1, Test Probe Length :100mm 2, Test Probe Diameter:1.0mm 3,Dam- sphere Diameter:35mm 4,Handle Diameter:10mm 5,Handle Length 100mm 6, According to IEC61032 figure 4 (the Test probe D)

Place of Origin:China

Brand Name:Julixing

...Test Probe Kit of Jointed Finger | Unjointed Finger | Test Pin | Test Ball | Access Probe IEC 60950 Figure 2A – Test finger, Figure 2B – Test pin, Figure 2C – Test probe, Figure 2D - Accessibility of internal conductive parts, Figure 4A - Impact Test Using a Steel Ball. Meets IEC 60950. Accessibility probes are used to test...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test