stepper motor controller chip

Brand Name:Hetai

Model Number:HTD2208A

Place of Origin:China

... features excellent performance, which is used to adapt to the three-phase 86 and 110/130 stepper motors so as to make the motors have excellent properties of high speed and large torque output, low speed, low vibration, low noise, low heat ...

Brand Name:JIUQI

Model Number:JQ-201SD

Place of Origin:Jiangsu, China (Mainland)

...Stepper Motor Driver For Marking Machine 1. Description: * Ultra-low vibration noise * Built-in 232/485/CAN bus interface * Automatic parameter setting function, baud rate can be set * Precision current control reduces motor heat * Support software to set a variety of parameters and rich protocol control * Compatible with long instruction and short instruction control * Can drive 4/6/8 line two phase, 4 phase stepper

Brand Name:ST

Model Number:L6206D013TR

Place of Origin:Italy

... ●Diagnostic output ●Paralleled operation ●Cross conduction protection Description: The L6206 device is a DMOS dual full bridge designed for motor control applications,

Brand Name:STMicroelectronics

Model Number:L298N

Place of Origin:original

... controls, industrial automation, and robotics. This chip can be used to control two DC motors or one stepper motor. It features two inputs, two outputs, and an enable pin. The chip also provides protection against over-voltage, under-voltage, and over

Brand Name:TOSHIBA

Model Number:TB6600HG

Place of Origin:Original

...Ignition Controllers & Drivers Product: Stepper Motor Controllers / Drivers Type: 2 Phase Operating Supply Voltage: 8 V to 42 V Output Current: 4 A Operating Supply Current: 4.2 mA Minimum Operating ...

Brand Name:UIrobot

Model Number:UIM243

Place of Origin:CHINA

...control miniature integrated stepper motor controller UIM243XX stepper motor controllers are series of microprocessor embedded, voltage control, miniature stepper motor controller. UIM24301 is a sub-miniature controller, whose land pattern is standard DIP18(0.6”width) and can be mounted onto user PCB directly. With the UIM243XX controller, motor...

Brand Name:ST Micro electronics

Model Number:L297/1

Place of Origin:Shenzhen, China

...unipolar step motors in microcomputer-controlled applications. The motor can be driven in half step, normal and wawe drive modes and on-chip PWM chopper circuits permit switch mode control of the current in the windings. A feature of this device is that it

Brand Name:STMICROELECTRONICS

Model Number:L297

Place of Origin:Original

STEPPER MOTOR CONTROLLERS ►NORMAL/WAWE DRIVE ►HALF/FULL STEP MODES ►CLOCKWISE/ANTICLOCKWISE DIRECTION ►SWITCHMODE LOAD CURRENT REGULATION ►PROGRAMMABLE LOAD CURRENT ►FEW EXTERNAL COMPONENTS ►RESET INPUT & HOME OUTPUT ►ENABLE INPUT DESCRIPTION The L297/A/D Stepper Motor Controller IC generates four phase drive signals for two phase bipolar and four phase unipolar step motors in microcomputer-controlled applications. The motor...

Brand Name:Junqi

Model Number:JQ6A

Place of Origin:China

...latest 32-bit DSPdigital processing technology.The driver control algorithm adopts advanced variable current technology and advanced frequency conversion technology. The driver generates less heat and the motor vibrates less, smooth operation. USERS can

Brand Name:Ti

Model Number:DRV8821DCAR

... IC Motor / Motion / Ignition Controllers & Drivers Dual Stepper Motor Controller/Drive 1 Features Dual PWM Microstepping Motor Driver – Built-In Microstepping Indexers – Up to 1.5-A Current Per Winding – Three-Bit Winding Current Control Allows up ...

Brand Name:VIC-TECH

Model Number:SWT-203M

Place of Origin:Jiangsu, China (Mainland)

...stepping motor with phase current ≤3.2A. 2. Adopting techniques and processes such as constant current chopping and noise absorption suppression to make stepper motor system High reliability, small size, light weight, high efficiency, balanced operation,

Brand Name:HEJIE

Place of Origin:CHANGZHOU,CHINA

DM542 step drive digital 18V~60VDC Nema17/23 stepper motor controller 1.The product description: Average current control, 2-phase sinusoidal output current drive 8 channels output phase current setting Offline command input terminal High ...

Place of Origin:Shandong, China

Brand Name:Leadshine

Model Number:DMA860H

Leadshine DMA860H stepper motor controller driver for cnc router Product parameter Product display Product details Our advantage Company Information Jinan Yinfan Electromechanical Equipment Co., Ltd. is located in Jinan City. It was established in October ...

Brand Name:Samsung

Model Number:J91741015A

Place of Origin:Japan

J91741015A SM411 stepper motor control board Step axis board J91741015A SM411 stepper motor control board Step axis board CM402 NPM Panasonic chip mounter accessories 8mm FEEDER pressure cover N210103441AA CM402 NPM Panasonic mounter accessories 8 12MM ...

Brand Name:K-EASY

Model Number:Dv422 DV556C DV860C DV3522C DV3722C DE2205C DE2405C DE2608C DE3722D

Place of Origin:China

...stepper motor speed controller driver Stepper motor driver Product features Strong compatibility and scalability RS485 Communication Anti-resonance At Low Speed T/S Curve Command Smoothing Speed Running Built-in Singe Axis Controller Acceleration/Deceleration Setting;Zero Return Function Brand: K-Drive Certificate: CE, RoHS RS485 Communication Controlling Type Stepper...

Brand Name:Casun

Model Number:42SHD0287-24BH

Place of Origin:CHINA

...Stepper Motor Series offers powerful holding torque in a variety of sizes. When used in conjunction with stepper motor drivers, complex motion trajectories can be easily achieved. Features: Bipolar or unipolar versions available Hybrid stepper construction Expert in drivetrain solutions Contract-based manufacturing services are welcome Customizations on request Appearance Dimensions Motor...

Place of Origin:Guangdong, China

Brand Name:Faradyi

Model Number:42/57/86 stepper motor

Nema 17 23 34 42 Closed Loop Linear Stepper Worm Gear Motor Driver Manufacturer 1 Axis Stepper Motor Controller #detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#...

Brand Name:JSS-MOTOR

Model Number:3DM860D

Place of Origin:CHINA

3-phase stepper motor driver for nema 34 1.2 step angle step motor 24-80VDC 3-phase stepper motor driver: Features 1. 3-phase digital stepper driver, adoption of 32-bit DSP technology 2. Low-noise, low-vibration and low temperature rising 3. Voltage 24-...

Brand Name:Original Factory

Model Number:TMCM-6110

Place of Origin:CN

... board. It supports up to 6 bipolar stepper motors with up to 1.1A RMS coil current. There are separate motor and reference/end switch connectors for each motor. In addition, the module offers 8 general purpose inputs and 8 general purpose outputs. The