test probe 13 of iec 61032

Brand Name:HongCe

Model Number:HT-I09

Place of Origin:China

... – Part 1: General requirements clause 8.1.2; IEC 61032 Protection of persons and equipment by enclosures –Probes for verification figure 9 Application of Test Probe 13 of IEC 61032: Test probe 13 of IEC 61032 is applied with a force not exceeding 1 N

Brand Name:HJ

Model Number:HT-I09

Place of Origin:China

...Test Finger Probe Figure 9 Test Probe 13 With 15mm Length Metal Pin Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 9 test probe 13. IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ figure 2B. Application: Other access probes...

Place of Origin:China

Brand Name:Julixing

...Probe 8,6 Test Probe 18 of IEC 61032 & Small Finger Probe 5,6 Test Probe 19 of IEC 61032 Conforms to: Standard IEC61032-1997, IEC60529-2001, GB/T4208-2008 and UL etc. IEC 61032 Figure 12 – Test probe 18 (small finger probe ∅ 8,6) – Finger: metal material – Handle: insulating material The extension of the handle represents the arm of the child. The handle is provided with an extension 451,6 mm long, and the probe...

Brand Name:SHC

Model Number:SC-41

Place of Origin:China

Access Probe 41 To Test Hazardous Parts Figure 16 Thorn Probe Main specification and corresponding technical parameters: Parameters /Mode Test thorn probe SC-F1641 1 Ф30±0.05 2 21.5 0 -0.05 3 80±0.2 4 Ф50±0.2 5 80±1 Product information: The test thorn ...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:CHINA

Thrust Rest Finger Test Finger Rigid Test Finger Test Probe Uses Protection test straight finger 50N thrust test finger Used to test the body to prevent touching parts, can also be used to check the hole of the outer casing or the inner baffle of the outer...

Model Number:TP13

... Probe This pin is used on appliances for verifying that there is no access to hazardous live parts of heating elements which could be touched accidentally by a tool (i.e. screwdriver). Meets IEC & EN requirements. Body is plastic, tip is stainless steel.

Brand Name:Sinuo

Model Number:SN2210-9

Place of Origin:China

... is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Probe Dimension: Metal pin tip diameter (mm) Ф3 0 -0.05 Metal pin tail diameter (mm) Ф4 0 -0.05 ...

Brand Name:KINGPO

Place of Origin:China

...IEC 60132/60335 standard Test Probe Pin Thorn Kit are the necessary items for household and similar electrical appliances anti-electric shock protection test. The test kit consists of : No. Item Name Stadanrd 1 Test Probe B IEC 61032 figure 2 2 Test Probe 13 IEC 61032 figure 9 3 Test Probe 41 IEC 61032 figure 16 1. Stadard Test Probe...

Brand Name:kingpo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:china

... 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1.

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:PEGO

Model Number:PG-TPB

Place of Origin:China

...IEC 61032 Test Probe B equipped with 42V Electrical Indicator 1. Introduction of IEC61032 Test Probe B: Test probe B ( jointed test finger) is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2. Test probe B with 50N force is for IP2X testing, it means for the protection of person’s finger from hazard parts. 2. Specification of IEC61032 Test Probe...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-13

...test pin, test pin 13, test rod Product Description IEC60065 IEC61032 short test pin, test pin 13, test rod Short test pin meets the standard requirements of IEC60132 IEC60065 IEC60335 IEC60950. The Test Probe is a wide range of probes to meet the most common standards including those from IEC...

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP4X Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the