thickness 2mm accessibility wedge probe

Brand Name:HongCe

Model Number:HT-U14

Place of Origin:China

... not be used in lieu of construction features that prevent access to hazardous moving parts. Test Finger Probe For HOUSEHOLD / HOME OFFICE DOCUMENT SHREDDERS , the Following additional compliance criteria apply: The accessibility probe/wedge illustrated in

Place of Origin:China

Brand Name:Julixing

Model Number:LX-S113

...Wedge Probe for Paper Shredders 1. Specification: Length: 300 mm Bent finger diameter: 12 mm Bendable Section: 30/30/40 mm Baffle diameter: 50 mm Baffle length: 100 mm Material: Stainless steel Reference: UL60950 Fig NAF.2 and NAF.3 2. Reference standard: UL60950 Figure NAF2 and NAF3 3. Product Details: This product is used for testing access...

Brand Name:kingpo

Model Number:KP1105

Place of Origin:china

Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shredders. The KP1105 is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shredders. The other probe...

Brand Name:PEGO

Model Number:PG-WP

Place of Origin:China

Wedge Probe Designed according to IEC60950 for Paper Shredder Inlet 1. Introduction Wedge probe is designed according to UL60950 figure NAF.2 and NAF.3, IEC60950 and IEC62368 figure V.4, it is for safety test of paper shredder inlet. 2. Application It is applied to test the protection against the slot opening of paper shredder inlet, the probe can not access to the hazardous moving parts. 2. Specification Distance from Probe Tip (mm) Probe

Brand Name:KingPo

Place of Origin:China

...wedge probe is a new accessibility probe required by the standard of IEC 60950-1 Fig NAF.2(S5366) and NAF.3(S5370) as well as BS 60950.1108/260/CD for paper shredders. It is used to test whether the hazardous parts of shredder can be touched by people. The probe...

Brand Name:SHC

Model Number:SC-F V. 1 V.2 V.3 V.4 V.5

Place of Origin:China

...Probes IEC62368 probe no. Probe Name IEC 62368 Figure V.1 Jointed test probe for equipment likely to be accessible to children IEC62368 Figure V.2 Jointed test probe for equipment like to be accessible to children IEC62368 Figure V.3 Blunt probe, Telecom Test Probe IEC62368 Figure V.4 Wedge probe IEC62368 Figure V.5 Terminal probe I) IEC 62368 Figure V.1 Jointed test probe...

Brand Name:TMTeck

Place of Origin:China

Kit of nine (9) Rexolite wedges compatible with REX1 IHC-RW DLA corrosion probe. Kit includes: One (1) flat wedge to cover from flat down to 24in OD plus eight (8) AOD wedges to cover the range from 24in OD down to 4.5in OD. What you can enjoy if buying...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-A

IEC60529 IP1X Test Probe A Article NO.: BND-A Specification: IP1X Probe A /Test Probe A 1, According to : IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for domestic and similar electrical appliance of against ...

Brand Name:SADT

Model Number:SA40EZ

Place of Origin:Beijing

... gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, brass, silver, oil, acrylic resin, glycerin, water glass and etc.. Specifications: ...

Brand Name:Better Health

Model Number:NT-100

Place of Origin:CHINA

...Probe for Adenoidectomy Surgery | Reduced Swelling and Fast Recovery Tissue-Specific Waveform Precisely tuned 100kHz RF coblation creates a 100-150μm plasma layer, enabling molecular disintegration of adenoid tissue with 0.2mm collateral damage. The RF Coblation ENT Probe's curved 120° tip accesses...

Brand Name:Baitong

Model Number:bt-006

Place of Origin:China

SUS304 wedge wire screen Curved screen for water filter Wedge Wire Screen Introduction Wedge Wire is a welded steel structure, mainly used for filtration, separation, and retention media. It consists of surface profiles, usually V-shaped, that are ...

Brand Name:Sinuo

Model Number:SN2210-4AT

Place of Origin:China

... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire. can be used for anti-electric shock test when equipped with alligator clip. Or

Brand Name:CANEX Geomembrane Wedge Welder

... the other edge adopt advanced hot weldge structure. with its high power, high speed and pressure, it welds 0.2mm-2.0mm thickness It is very small and light. It is available for welding over 1.0mm HDPE, LDPE ,EVA ,PVC, ECB, PP and other hot melt materials.

Brand Name:Tenglu

Place of Origin:Hengshui,China

...wedge wire screens (customized),Stainless Steel Wedge Wire Wrapped Material:stainless steel, carbon steel Diameter:50-6000mm Slot: 0.1-1.0mm thickness: 4-10mm Item Wedge Wire Screen Pipe Material Stainless steel 304, 304L, 316L and 321 etc. Specification Profile Wire Width: 1.0mm to 3.2mm...

Brand Name:SMT

Model Number:SMT-CG200

Place of Origin:China

... Feeding length 9~200mm Folding width 2~5mm, adjustable Cutting speed About 130 pieces per minute Folding & cutting precision 0.2mm Power supply 220V, 50/60Hz, 0.5kW Machine weight About 210kg Dimension (L x W x H) 450 x 900 x 1200mm (2

Brand Name:SINOMATIC

Model Number:SN-SLB02

Place of Origin:Shenzhen, China.

1.2mm thickness housing 304 stainless steel full height sliding gate access control turnstiles Introduction of full height sliding gate: In the increasingly global mobility and dynamic work environments, we see a greater diversity of visitors passing thr...

Brand Name:soa

Model Number:TM01ss

Place of Origin:CHINA

...Probe FEATURES Solid metal read/write panel-mount probe for the Ddallas iButton family products. Integrated green LED for user-feedback signaling or no LED model. Probe guides the entry of the Dallas iButton family products. Dallas iButton slides over the surface to self-clean contacts. Accessible shallow probe cavity simplifies removal of debris such as mud. Probe suited for panels of up to 3mm thickness...

Brand Name:YOUCii

Model Number:U82024

Place of Origin:CHINA

....0mm D, but the detection surface thickness is extremely thin), which can be easily integrated into compact optical systems or narrow Spaces. High-precision detection The InGaAs detector is adopted, with a wavelength range ...

Brand Name:MM-TECH

Model Number:SWT-NSGM2

Place of Origin:HEBEI, CHINA

Hot Wedge Welder​ Features It adopts advanced hot wedge structure. With its high power, high speed and pressure. It weld 0.2-2.0mm thickness hot melt material such as HDPE, LDPE, PVC, EVA, ECB, PP. SWT-NSGM2 is of welding towards on edge. SWT-NSGM2 0.2-2....