tooth yoke separate stator iron core

Brand Name:YUMA

Model Number:80servo stator and rotor stack large inertia

Place of Origin:Changzhou, China

... stator adopts the combined structure of tooth and yoke, which greatly reduces the production cost of iron core compared with the conventional segment structure;In the design of the rotor, the magnetic steel structure adopts IPM structure. Compared with

Brand Name:Sanxin

Place of Origin:China

Model Number:SX1031

...Hard alloy punches, with their excellent material properties, serve as core components in stamping molds for continuous cutting, punching, and breaking operations. These punches are installed on stamping molds to induce separation or plastic deformation in

Place of Origin:China

50mm Bldc Stator Core 0.2/0.35mm Silicon Steel Stamping Motor Stator 24 Tooth Stator Accessory We have been in the motor iron core stator rotor production industry for more than 10 years, with rich experience and leading technology. In 2016, weite ...

Brand Name:JLNE

Model Number:TF-008

Place of Origin:Jiangsu,China

... winding in the three parts of the iron core. The motor stator is a special equipment for dismantling broken disassemble the motor stator, the hydraulic system equipment, equipment can be the stator (limited to cast-iron), cylindrical core broken into two,

Place of Origin:JiangSu,China

Brand Name:HengTong

Model Number:Customer settings

... lead wire of iron yoke clamp. Because if the iron core touches the upper clamp to cause a multi-point ground fault, the ground current only flows inside the iron core clamp, and no current flows through the core ground lead, which will cause the staff to

Brand Name:THMotor

Model Number:TDMK400

Place of Origin:China

...welded with steel plates, and the lower part of the frame is the outlet end of the motor. The stator iron core is made of 0.5mm thick low-loss silicon steel sheet punched fan-shaped sheets, the core segments are separated by radial ventilation duct sheets,

Brand Name:Wisco

Model Number:50WW400

Place of Origin:CHINA

... isotropic, so it is manufactured with non-oriented cold rolled silicon steel sheet or hot rolled silicon steel.It is generally required that the iron loss difference in the vertical and