ul 60335 test finger probe

Brand Name:KingPo

Place of Origin:China

...UL 60335 Test Finger Probe With A Center Pin UL 60335-2-24 Figure 101.DVA.2 Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age Notes: 1 – The probes were designed with a center pin to rotate the hand with respect to the lower arm. That motion can be equivalently represented by rotating the probe. 2 – The finger ″tip″ is developed to match the dimensions of the UL articulated probe...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I99

Test Finger Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger Probe 5.Ball Pressure Tester 6.Telecom Test Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL...

Brand Name:SHC

Model Number:SC-Kit 1

Place of Origin:China

...60335 Standard Test Probe Kit Electric Safety Check Device List: IP1X Test Probe A IP2X The Standard Test Finger Probe IP3X Test Probe C IP4X Test Probe D IEC60335 Test Probe A Specification: IP1X Probe A /Test Probe A 1, According to: IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for household and similar electrical appliance of against electric shock protection test...

Brand Name:HJ

Model Number:HT-I02, HT-U01, HT-U02, HT-U03

Place of Origin:China

... 1, figure 2, figure 3, and figure 4. Application: It is used for protection against accessibility to current-carrying parts. Test Finger Probe Parameter: Finger length Figure 1: 97mm Figure 2: 101.6mm Figure 3: 80mm Figure 4: 101.6mm Consist of: Figure 1

Model Number:TPU1

...articulated test finger probe This is the “UL” test finger, researched and designed by UL and required by most UL Standards. Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. Bell-Core accessory available.

Brand Name:kingpo

Place of Origin:china

Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shredders. Calibration Certificate:Figure V.4 ...

Brand Name:PEGO

Model Number:PG-TP18

Place of Origin:China

...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The

Brand Name:JLX

Model Number:LX-1211

Place of Origin:Made in China

...) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Rigid Test Finger was made on stainless steel and

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the

Brand Name:GESTER

Model Number:GT-MB06

Place of Origin:China

...ts of toys can be touched. If it is accessible, then conduct the related test according to standards so as to reduce the damage hazards for children. This tools include 2 models: Probe A and Probe B: 1. An accessible part for a toy or article intended for

Brand Name:YUYANG

Model Number:YY1132

Place of Origin:China

...Test Finger Probe Toys Testing Equipment For Children Safety Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe...

Brand Name:Lonroy

Place of Origin:China

Model Number:LR-G30

... to touch the electronic testing. IEC60065 12mm test finger probe with 75N thrust Nodular Finger Length 80mm Nodular Finger Diameter 12mm Dam-board Diameter 50mm Test Force 15N Standard IEC61032 IEC60065 IEC60335-1 IEC60884-1 Product overview: In line with

Brand Name:YUYANG

Model Number:YYT010C

Place of Origin:China

Test Finger Probe Toys Testing Equipment For Children Toys Testing Equipment Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Test...

Brand Name:Sinuo

Model Number:SN2210-49

Place of Origin:China

UL 60335 -2 3.5-4.5 Years Age Test Probe With Center Rotate Pin To Simulate Fingers Product Overview: This UL 60335-2-24 Figure 101.DVA.1 Articulated Probe 3.5-4.5 Years Age SN2210-49 is designed and manufactured meet the requirements of the standard of ...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:HUST Tony

Model Number:TW-204

Place of Origin:Guangdong,China(Mainland)

...baby or children’s fingers to test if the tested toy component or parts are accessible or. So it is also called standard test finger probe. Technical specifications Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe B for

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Finger Probe Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test

Brand Name:Kinte

Model Number:WH-8601

Place of Origin:Guangdong,China (Mainland)

GB4706.1 Standard Test Finger Pin Electrical Test Probes WH-8601 Standard test finger, pin (test probe), pin: meet the standards: GB4706.1, GB8898-97, GB2099.1-96, IEC884-1 the corresponding provisions of the requirements.