ul507 standard test finger probe

Brand Name:PEGO

Model Number:PA140

Place of Origin:China

...Test Finger Probe Hazardous Moving Parts Probe for Fan Blades Introduction Hazardous moving part probe is conforms to the standards of UL507 figure 8.1 (PA160B), UL1278 figure 9.1 (PA160). It is applied to test the accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is made of nylon, the finger is made by stainless steel. Specification Rigid finger...

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

.... This probe is designed for electrical product safety testing. It simulates the characteristics of human fingers to evaluate the accessibility of electrical enclosures and ensure the safety of electrical products during use. It is an indispensable tool in

Model Number:TP02

... the protection of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:GESTER

Model Number:GT-MB06

Place of Origin:China

...ts of toys can be touched. If it is accessible, then conduct the related test according to standards so as to reduce the damage hazards for children. This tools include 2 models: Probe A and Probe B: 1. An accessible part for a toy or article intended for

Place of Origin:China

Brand Name:Julixing

...Standard Test Finger Probe B with 10 ~ 30N Force Force Level: 10N, 20N, 30N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical problem. Technical Parameters: Knurled Finger Diameter: 12mm Knurled Finger Length: 80mm Application: 1. The joint part of The Standard Test...

Brand Name:YUYANG

Model Number:YYT010C

Place of Origin:China

Test Finger Probe Toys Testing Equipment For Children Toys Testing Equipment Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Test...

Brand Name:KingPo

Place of Origin:China

... probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, UL1310 Fig 16.2, UL6500 Fig14,

Brand Name:HJ

Model Number:HT-U02, HT-U03

Place of Origin:China

...Test Finger Probe Articulate Probe With Web Stop (PA100A) Stainless Steel Figure Standard: UL1278 Movable and Wall- or Ceiling-Hung Electric Room Heaters Figure 8.3; UL 2157 Electric Clothes Washing Machines and Extractors Figure 1; Other standard IEC62368Fig V1, UL474 Fig 5.1, UL507...

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the

Brand Name:SHC

Model Number:SC-F51

Place of Origin:China

... SФ50 mm SФ50.8 mm SФ50.8 mm Weight ---- 500±25g 500±25g 535±25g 535±25g Standard IEC61032 GB4943 GB4943 UL507 UL507 Product information:

Brand Name:kingpo

Model Number:IEC62368-1-Figure V.1

Place of Origin:china

...Standard Articulated Jointed Test Finger For Preventing The Finger From Approaching To The Hazardous Parts Test Finger Length: 234mm The Bending Part Length: 30/30/40mm The UL Articulated Finger Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. 1, According to : UL507...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Standard Test Finger With Alligator Clip Product overview: This is a precision test finger made in accordance with IEC61032 figure 2 test probe B, it is required by IEC 61851-1 clause 8 and 12.4,etc. Application: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe...

Brand Name:YUYANG

Model Number:YY1132

Place of Origin:China

...Test Finger Probe Toys Testing Equipment For Children Safety Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standards...

Brand Name:Kinte

Model Number:WH-8601

Place of Origin:Guangdong,China (Mainland)

GB4706.1 Standard Test Finger Pin Electrical Test Probes WH-8601 Standard test finger, pin (test probe), pin: meet the standards: GB4706.1, GB8898-97, GB2099.1-96, IEC884-1 the corresponding provisions of the requirements.

Brand Name:Lonroy

Place of Origin:China

Model Number:LR-G30

... to touch the electronic testing. IEC60065 12mm test finger probe with 75N thrust Nodular Finger Length 80mm Nodular Finger Diameter 12mm Dam-board Diameter 50mm Test Force 15N Standard IEC61032 IEC60065 IEC60335-1 IEC60884-1 Product overview: In line with

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC ...

Brand Name:HUST Tony

Model Number:TW-204

Place of Origin:Guangdong,China(Mainland)

...baby or children’s fingers to test if the tested toy component or parts are accessible or. So it is also called standard test finger probe. Technical specifications Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe B for

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Testing Equipment Standard Test Probe B IEC 62196 Complied Standards & Clauses Conforms to IEC 62196-1:2022 clause 10.1. IEC 62196-1:2022 clause 10.1. Equipment Overview This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito,finger...

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Finger Probe Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test