ul746a clause wire ignitability tester

Brand Name:HongCe

Model Number:GW-2

Place of Origin:China

... of an insulating material from an electrically heated wire is described in the Method for Glow-Wire Ignitability Test on Materials, IEC 695-2-1 /3. Flammability Testing Equipment 34.1 .2 The Glow-Wire Ignition Temperature (GWIT) is to be assigned as the

Model Number:FGW

...wire ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite...

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition...

Brand Name:HJ

Model Number:HWI-1

Place of Origin:China

...wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

...11, IEC 60695-2-12, IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time.

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:China

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby.

Place of Origin:China

Brand Name:KeRang

Heavy current ignition tester Standard: IEC 60950-1,BS EN 60950-1,BS 7002, UL746A,IEC60947.1, IEC730.1. Application:It is suitable for arcing resistance test of electric and electronic products, household appliances and its materials. The working principle...

Place of Origin:China

Brand Name:CHENGFENG

Product Description Glow wire testing machine Technical parameters: 1. Hot wire temperature: 500 ~ 1000℃ adjustable 2. Temperature tolerance: 500 ~ 750℃ ±10℃, > 750 ~ 1000℃ ±15℃ 3. Temperature measuring instrument accuracy ±0.5 4. Scorching time: 0-99 ...

Brand Name:YUYANG

Model Number:YYW-012

Place of Origin:China

500 ºC ~ 1000 ºC UL746A Lab Glow Cable And Wire Testing Equipment Product Description: Glow wire testing machines are used for the burning test of insulating materials in place for parts of electrical equipment which are not fixed live parts but which ...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

...Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Brand Name:KingPo

Model Number:KP-601A

Place of Origin:China

IEC 60601-1 Spark Ignition Tester to check the RISK of fire in an OXYGEN RICH ENVIRONMENT for ME EQUIPMENT & ME SYSTEMS 1.According to standard: IEC 60601-1-Figure 34-figure37(clause 11.2.2) 2.Specifications Power Supply AC220V 50HZ According to the ...

Brand Name:JIEDONG

Model Number:JD-3051

Place of Origin:Guangdong, China

...-shaped burner of a specified size (Φ0.9mm), and uses a specific gas (butane) to ignite the sample at a 45° angle to see if the sample is ignited and burned. And the length of the burn to assess the fire risk of small flames inside the equipment due to

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60695-2-20 Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview ...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

Coil Ignitable Glow Wire Ignition Test Programmable Sus304stainless Steel Standard Gb5169 5114 glow wire tester machine Technology data: accord with standard:GB5169/IEC60695 SIZE:1120W*600D*1020H Glow wire: Φ4mm Ni/Cr(80/20) Thermocouple: Φ0.5mm K style ...

Brand Name:SHC

Model Number:SC-HWI

Place of Origin:China

... holder distance 250mm Specimen holder distance and height 70mm,height:60mm (the distance between the holder surface to the tray surface) Wire wrapping tension and its distance 5.4N±0.05N, 6.35mm±0.

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:Guangdong

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby.

Brand Name:PEGO GROUP

Model Number:PG-DYR

Place of Origin:China

...BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc.. It’s used to measure and assess solid insulating material against to resistance to ignition from arcing electrical sources.

Brand Name:DAXIAN

Model Number:DX8086

Place of Origin:China

...Ignition Testing Equipment Product Overview: According to IEC 60950-1:2001 "Safety of Information Technology Equipment" and UL746A, IEC60947.1:1999 and other standards specified in the simulation safety test items. The high-current arc ignition tester...

Brand Name:GESTER

Model Number:GT-MC38

Place of Origin:China

Hot Wire Ignition Tester Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision adjustable power supply Imported aluminum fixture Equipped with test ventilation device One-button timing ...