water based release agent

Brand Name:Lubekote

Model Number:xxxxx

Place of Origin:China

...Water Based Release Agent for Antivibaration Sealing Multiple Release Our Lubekote release agents can be used for damping, sealing and other molding molds, tire molds, track molds, excellent performance, saving process time and extending the cycle of mold cleaning and replacement Permanent Water Based Release Agent Advantages: Easy to use Eco friendly Prevents build up on the molds Extending the cycle of mold cleaning Excellent release

Brand Name:EXCEEDCHEM

Model Number:Water Based Release Agent

Place of Origin:China

... Chemical Composition: The water based release agent for shoe Sole is made by special silicone oil, wax liquid and surfactant by special process. 2. Properties Item Index Appearance Milky ...

Place of Origin:CHINA

Raw Chemical For Plaster Panel Water-based Foaming Agent For Gypsum Board Our gypsum board foaming agent is a special surfactant additive developed for paper-faced gypsum board, drywall and plasterboard production. When added into gypsum slurry, it can ...

Brand Name:DR

Model Number:DR-190

Place of Origin:Made in China

...Water Based Dispersing Agent BYK-190 For Printing Ink Dispersing agent DR-190 is light yellow transparent liquid,is a widely used dispersant for dispersing various pigments. Specification Item Value Appearance Light yellow transparent liquid Active content 90% (10% water) Viscosity(25℃) 300-800cs Flash point > 100℃ Density,20°c g/ml 1.06 Acid,mg KOH/g 10 Performance: This agent...

Brand Name:Hongshun

Model Number:HS-25WC

Place of Origin:Dongguan

Water-based Cleaning Agent Remove Machine Processing Oil The Hill machining oil cleaner is a water-based cleaning agent formulated with a variety of imported surfactants, corrosion inhibitors and other additives. It has strong emulsifying, dispersing, ...

Place of Origin:China

Water based Flexible PU foam is an environmental protection type using water as blowing agent, with good performances of low density ( 8~10kg/m3 ), open cell, flame retardant( B3 grade) etc. During spray process in site, the breathing small open cell filled with air, without producing toxic gas to destroy the Ozone layer( traditional blowing agent...

Model Number:BWF-160

Brand Name:Bluwat

Place of Origin:China

Water-Based Foam Control BWF160 Nonionic Silicone Defoamer for Aqueous Foaming Systems BWF160 is a nonionic silicone defoamer developed for aqueous foaming systems. It is supplied as a milky-white flowable emulsion designed for rapid foam knockdown, continued suppression and easy dispersion in water-based...

Brand Name:RQT

Model Number:RQT-BKR

Place of Origin:China

Product Introduction: Through years of continuous learning, refinement, innovation, and research and development by our polymer experts, we have developed the high-end series of specialized products that can replace ordinary fluorescent whitening agents...

Brand Name:JOYWAY

Model Number:PU-5074

Place of Origin:China

...Release agent PU-5074 Mould release agent water base for the shoe sole for the upper mould Characteristic: PU-5074 is a emulsion formed by mixing siloxane and silicone resin. Mainly used for polyurethane soles, self-crust, hard foam and other products, dry surface, light Natural, good alcohol solubility Physical property: Item Data Appearance White liquid Solid content 28% Density About 1.0 PH 7.0-8.0 Emulsifying agents nonionic Diluent Water

Brand Name:WeiLi Resin®

Model Number:WQ-W40

Place of Origin:China

Water Resistane And Anti-Sticking Wax Dispersion For Water-Based Ink And OPV WQ-W40 Wax Dispersion Introduction WQ-W40 is a synthetic wax dispersion emulsion with 40% solid content. It is recommended to be used in water-based coatings to improve the slipperiness, anti-sticking and water resistance of products. It can be used as a lubricant and softener for yarns in the textile industry; water-resistant agent and mold release agent...

Model Number:SR-YGL

Place of Origin:china

...Release Agent SR-YGL Technical Introduction Release agent SR-YGL is a liquid film release agent that prevents the adhesion of unvulcanized rubber sheets and semi-finished parts, and also prevents vulcanized products from sticking together during pressureless vulcanization. SR-YGL overcomes the dust problems associated with some powdered release agents (such as talc) and prevents water...

Brand Name:ME

Model Number:M75

Place of Origin:Qingdao

... carbon 81.56% ash 18.78% moisture 0.20% mesh 980 Application Mold Release Specification Graphite I75L is a powder made on the basis of graphite and other carbon and mineral materials. Application Graphite I75L is used as an immerse product (...

Brand Name:CLLZY

Model Number:pva-005

Place of Origin:JIANGSU, CHINA

... system used to make composites parts but is soluble in water. It is particularly recommended as a parting agent for separation between polyester or epoxy resins and various mold surfaces but may be used with most thermoset resins. PVA release film is not

Place of Origin:Guangzhou, Guangdong, China

Brand Name:Vivid

Model Number:Release agent Type VD01

...release from molds. With the unique recipe, this product can help maintain the original flavor of products without bringing in any unpleasant flavor. By using this release agent, products are heated evenly during baking resulting in uniform natural colors.

Brand Name:CLEANWATER

Model Number:Softening Agent

Place of Origin:China

...Agent paper making release agents get slip effect of paper Product name: Environmental Soften Agent for textile industry industrial papermaking release agents are used to get slip effect of the paper from the processing equipment Specifications: Appearance: Colorless to yellowish transparent liquid Ionicity: weak cation PH value: 6.5 Content: 60% Solubility: Easily soluble in water...

Place of Origin:Guangdong, China

Brand Name:ANCAMINE

Model Number:ANQUAMINE 287

... green concrete. It is designed for use with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Anquamine 287 curing agent based primers exhibit excellent adhesion to

Brand Name:JUNHE

Model Number:1353

Place of Origin:Changzhou in China

...Release Agent / Zinc Phosphate Pretreatment 80-120 Zinc Stearate Release Agent Introduction Zinc Stearate Release Agent consist of organic acid, non-ion surface active agent and zwitterion free from phosphor and nitrogen. Bath solution compound: Put cold water into the tank till three-quarter with appropriate degreasing agent, then stirring, after, add sufficient water...

Model Number:HF620W/HF-630W/HF-650W

Place of Origin:CHINA

Brand Name:SKYHIL

.... Water-based coatings are considered “green” or environmentally friendly as the VOC content is generally very low or negligible in quantity. Water-based coatings can be applied over almost all ink types utilizing flexo/anilox, gravure, ink-train and

Brand Name:WENYOU

Model Number:WY-401

Place of Origin:CHINA

..., may cause lung injury,when the fire (such as cigrette)fuel burning goods heated over 250 degrees Celsius, will release potentially harmful smoke. Therefore, do no somke before spraying and wash your hards before spraying. Whether this material is

Brand Name:WAYEN

Water Based Acrylic Paint for Wooden Products & SPF Veneered Boards Product Overview Our high-quality Water Based Acrylic Paint is designed for both professional painters and DIY enthusiasts. This chemical auxiliary agent offers exceptional performance with an eco-friendly profile, ensuring easy application, quick drying times, and minimal environmental impact compared to traditional solvent-based paints. Key Features Product Name: Water Based