wire ignitability test machine

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...Wire Ignitability Test Machine Overview: The glow wire test is to test the stability of electronic and electrical products during operation. The glow wire itself is actually a resistance wire loop with a fixed specification. During the test, it must be heated to a specified temperature by electricity, so that the tip of the glow wire contacts the sample for a standard time, and then observe and measure its state. The test...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

...Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition test...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

...Ignitable Glow Wire Ignition Test Programmable Sus304stainless Steel Standard Gb5169 5114 glow wire tester machine Technology data: accord with standard:GB5169/IEC60695 SIZE:1120W*600D*1020H Glow wire: Φ4mm Ni/Cr(80/20) Thermocouple: Φ0.5mm K style Heating temperature: 50℃ ～1050 ℃ Sample test...

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

...Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... of materials is crucial for ensuring the safety and integrity of structures. The Building Material Ignitability Test Machine with Single Flame Source is a cutting-edge device that offers precise and reliable testing capabilities, enabling manufacturers,

Brand Name:HOOHA

Place of Origin:Guangdong

Software Furniture Flammability Test Apparatus , PLC Automatic Anti Ignition Testing Machine Scope of application: The fire ignition source of the simulated match is evaluated against the ignition characteristics of the software furniture. Meet the ...

Brand Name:AI

Model Number:AIC-8191

Place of Origin:CHINA

... furniture conduct test methods and evaluation. This section applies to public places with mattresses, sofas and other upholstered furniture resistance to ignition test and evaluation, furniture Soft package resistance to ignition. Standard: ISO 8191-1~2

Brand Name:HOOHA

Model Number:FTech-FTPC 8

Place of Origin:DONGGUAN

... is an analog cigarettes and matches as flame ignition source for resistance to ignition of upholstered furniture conduct test methods and evaluation This section applies to public places with mattresses, sofas and other upholstered furniture resistance to

Brand Name:Infinity Machine

Model Number:RS-8106B

Place of Origin:Made in China

... to do bending test. Test method is: short-circuit clamping one end of wire and fastening it on the rotary disc, leaving it rotating right and left hanging certain load, to assess whether wire is in good conduction after certain test cycles (can be set).

Brand Name:Lonroy

Model Number:LR-Q031

Place of Origin:China

...Wire Bending Testing Machine Cable Flexing Tester 1. Product Description The wire bending and swaying testing machine is also known as the wire bending testing machine or the swaying testing machine. This testing machine complies with the regulations stipulated in UL817 and other relevant standards regarding "General Safety Requirements for Soft Wire Components and Power Soft Wire...

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

... wire ropes whose diameter are φ 6~φ 20mm during the reversing. The test can show the surface defects of wire during the test process. Technical parameters: Range of specimen diameter 0.1-1mm 1-3mm 3-10mm Test speed 60 ,90, 120m/min 60, 90, 120m/min 30,

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-K904

...Testing Machines / Hair Dryer Line Tail Wire Bending Test Machine Application : Hair dryer line tail bending test machine is suitable for testing wire in the maximum angle allowed in the resistance to bending and breaking rate , can be connected to a load test . dryer line tailbending testing machine testing principle : The sample is fixed on the fixture , test...

Brand Name:JIEDONG

Model Number:JD-3004

Place of Origin:Guangdong, China

...) JD-3004 product description: Applicable to the relevant manufacturers and quality inspection departments to bend (bend) the cable test. The test method is to fix the cable on the fixture. When the test is performed, the clamp swings left and right.

Brand Name:HERRMAN

Model Number:XBSRS Series

Place of Origin:CHINA

... is 1/Q of the output capacity, low distorted rate of output voltage wave. The tuning of the reactor is stability. Our products include two types. One is used for the test of

Brand Name:lixian

Model Number:HZ-4012

Place of Origin:China

.... It is mainly used for theФ3.0～Ф10.0 metal wire torsion testing machine. The function of which is determination of metal wire to withstand severe plastic deformation in one-way or two-way reversed ability and display of wire surface and inner defect.

Brand Name:PTE

Model Number:600KN/60T stranded steel wire tensile testing machine

Place of Origin:China

...wire tensile testing machine Product Description WAW-600E Series Computer Control Servo Hydraulic Universal Testing machine are guaranteed to meet ISO15579-2000, ISO679, ISO7438-1985, ISO6892, EN100021-1-2001, ASTM E8M, JIS Z2241-1998, ISO75000-1, ISO4012, ISO10065 and other international and national specifications, which are suitable for tension, compression, bending, shear and other tests by adding different test

Brand Name:Wirecan

Model Number:Xlzk-1

Place of Origin:china

...Wire Pinhole Testing Machine I-suntop wire and cable Testing machine20220301.pd... 1.Test standards Enameled Wire Pinhole Testing Machine : Test standards:IEC 60851-5,NEMAM W1000,GB/T 4074.5,JIS C3003-6 and CNS-C3151 and other standards. 2.Application for Enameled Wire Pinhole Testing Machine: It is suitable for the determination of paint film wire needle holes. 3.Technical parameters Enameled Wire Pinhole Testing Machine...

Brand Name:YY

Model Number:001

Place of Origin:CHINA

... Tester working noise <70db Winding 15,20,30,60rpm weight 100-500kg Structure: 1, the spring torsion testing machine under

Brand Name:SKYLINE

Model Number:SL-T110

Place of Origin:CHINA

...Wire Bending Test Machine Usage Test plug lead wire and the bending strength of the wire, can be automatically counted at the same time show the conductor resistance of the wire, the test material bending broken line, and can automatically stop operation. Characteristics This machine...