wireline pull tester pressure control

Brand Name:Ruixin

Model Number:For Wire 0.108"-0.16"

Place of Origin:China Baoji

Wireline Pull Tester Wireline Pressure Control I.Introduction A wireline pull tester is designed to testing the breaking force data of a slickline. II.Parameters 1. For Wire 0.108"-0.16" 2. Measurement Accuracy. ±1% 3. Continuous Working Hours. ≥8 H 4. Operating Temperature. -20℃-50℃ 5. Electrical Chart III.Routine maintenance 1. Wireline pull tester...

Brand Name:Techcore

Model Number:3FZ130-105

Place of Origin:CHINA

Wireline Valve Triple Hydraulic BOP Wellhead Pressure Control BOP The Triple Hydraulic BOP is a kind of wireline valve, used for wellhead pressure control during the wireline operation. The triple hydraulic BOP is equipped with three sets of Ram assemblies and hydraulic actuated system, which allow fast, safe and easy operation in a remote location. Triple Hydraulic Wireline...

Brand Name:HiYi

Model Number:BGT-120

Place of Origin:China

... interface; 2. Simple and fast operation process; 3. Accurate and reliable test results; The pressure control technology is very mature; at the same time, the authority management and electronic signature design are added to meet the requirements of

Brand Name:ZZ TOP OIL TOOLS

Model Number:Hay Pulley

Place of Origin:China

Wireline PCE Hay Pulley For Wireline Pressure Control Equipment The Hay Pulley is a part of wireline pressure control equipmen and used to control and manipulate ,the direction of the wireline from a horizontal position to a vertical position or route to the stuffing box from the wireline unit. The wireline pressure control hay pulley is generally positioned at the wellhead on the lubricator to reduce side pull...

Brand Name:SHQN

Model Number:Wireline Flow Tube; compatible head drawing required

Place of Origin:Shanghai, China

Wireline Pressure-Control Flow Tube — Head Compatibility and Inspection Requirements This 14-inch flow-tube listing is for drawing-based replacement enquiries for a compatible grease injection control head. Supply the head model, tube part number and dimensional drawing to confirm the replacement configuration. A flow tube alone does not establish the pressure...

Brand Name:JC Wellhead

Model Number:Wireline BOP FZ12-105

Place of Origin:China

...Wireline BOP For Wireline Pressure Control Equipment The Wireline BOP is also called Wireline Valve, which is a piece of Pressure Control Equipment. The Wireline BOP is installed between the wellhead and Wireline Lubricators to close around the wire and seal off the well pressure below it. Then the wireline...

Brand Name:INFINITY

Model Number:IC1362

Place of Origin:MADE IN CHINA

... Testing The Wire Pull Tester, also known as the Cable KICK Pull Yank Detector, is a high-performance testing machine designed for precise and efficient measurement of wire elongation. This state-of-the-art instrument is essential for quality control in

Brand Name:VCTSY

Model Number:WGLF-100, WGLF-150

Place of Origin:China

...pressure. This product can be used with the side pocket gas lift mandrel to complete gas lift production. Different from the conventional injection-pressure-operated gas lift valve, this product can be run and pulled by the wireline tool, thus reducing the

Brand Name:SKYLINE

Model Number:SL-T812

Place of Origin:China

Wire Tensile Testing Machine Wire Harness Tester Tensile Test Instrument Pull-off Testing Machine Product Introduction Of Terminal Pull Tester Terminal tension tester is a testing equipment developed by our company for the wire harness and electronics ...

Brand Name:yunyi

Place of Origin:china

The Automatic Pressure Controller, is a high-precision, fully automatic pressure calibrator designed to meet the demands of modern industry. This device offers a variety of pressure range options, suitable for pressure calibration and control in both gas...

Brand Name:Sinuo

Model Number:SNQC1005

Place of Origin:China

... charging guns, industrial plugs, sockets and couplers durability performance verification. The equipment adopts servo drive + PLC intelligent control system, simulates repeated insertion &

Brand Name:KEJIAN

Model Number:Kejian Kinsgeo

Place of Origin:Dongguan,China

... and pressure testing machine,which is suitable for testing strength of plastic film, composite materials, soft packaging materials, plastic hose, adhesive, ...

Brand Name:Sinuo

Model Number:SN1113L

Place of Origin:China

... of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps)

Model Number:UP-2001

Brand Name:YOUBI

Place of Origin:CHINA

Pull Tester For Testing Buttons And Snaps For Garments UP-2001 With Full Computer Product Introducation: Buttons pull tester mainly tests and verifies whether buttons, buckles, and accessories are firmly attached to clothes to eliminate the risk of infants...

Brand Name:Sunhope

Place of Origin:Guangdong，China

...Tester Pressure Test Machine For Radiator Condenser Airtightness Detection Product Overview This Professional Leak Tester is a differential pressure decay instrument engineered for precise airtightness detection in radiators, condensers, and similar heat exchange components. It delivers reliable, high-accuracy leak testing for quality control...

Brand Name:SHUOBODA

Model Number:BD-D1657-077

Place of Origin:China

...tester (pressure hydrometer) Product Overview The BD-D1657-077 Liquefied Petroleum Gas Density Tester is a precision instrument designed for accurate density measurement of LPG under pressure conditions. Applicable Standards SH/T0221-92 ASTM1657 Performance Characteristics High precision temperature control...

Brand Name:POOTAB , PERFECT

Model Number:PT-6086S-90

Place of Origin:Dongguan, Guangdong , China

90° Peel Bond Strength Tester, Pressure Sensitive Material Stripping Strength Testing Machine PT-6086S.pdf Peel Strength Tester : Tensile testing machine to test pressure-sensitive material, stripping speed of 300mm/min, precision +2%.Whenthe pressure-...

Brand Name:PHIDIX

Model Number:Customized

Place of Origin:Shanghai, China (Mainland)

... cable is pulled. This type of control is often found in applications where a simple and effective braking system is necessary. When the cable is pulled, it activates the brake mechanism, applying pressure or force to slow down or stop the equipment or

Model Number:XGY-16C

Brand Name:JHH

Place of Origin:Beijing, China

... Pipe Hydrostatic & Burst Tester — Adjustable Pressure Control for PVC, PE, PPR, PB, PERT Pipe This hydrostatic pressure testing machine adopts an advanced technical architecture to generate pressure–time and pressure–temperature test curves. These...

Brand Name:PTE

Model Number:Pneumatic Tensile Adhesion Pull Tester

Place of Origin:China

..., peeling force, and elongation of materials, components, and finished products. It is widely used in controling material quality. Application Industries Textile Fabrics Tensile Strength Testing Machine/Tester Price is widely used in most of industries: