work hardening steel

Brand Name:SHANDONG SENNAI

Model Number:hardened steel bushings

Hardened Steel Bushings Common Mechanical Part Reduce Wear And Friction hardened steel bushings Key Attributes name Hardened Steel Bushings Common Mechanical Part Reduce Wear And Friction keyword hardened steel bushings Applicable Industries Construction works...

Brand Name:takford

Model Number:D3/1.2080/CR12

Place of Origin:china

...wear resistance, but the impact toughness is poor characteristics. Applicaiton: D3 / Cr12 / 1.2080 steel is widely used cold working die steel, with high strength, good hardenability and good wear resistance, but poor impact toughness.It is mainly used for

Brand Name:DY

Model Number:1.2080 SKD1 D3 Cr12

Place of Origin:China

... hardenability and good wear resistance, but poor impact toughness. A high carbon high chromium steel noted for its resistance to abrasion, it offers excellent dimensional stability in hardening. After heat treatment D3 is hard, durable and dense, and is

Brand Name:Joyreap

Place of Origin:China

... Wear Resistant Hardened Steel Bushings Rolled Thin Wall Metal Bushings Rolled thin wall steel bushing is formed by stamping and rolling a low-carbon steel plate, and then forming a high-hardness wear-resistant layer on the working surface of bearing thr...

Model Number:PVB050

... steel bushings are designed according customer need with different kind of internal grooves providing lubricant distribution and abrasive particles removing. Flanged bushing or washer could be produced with the same technology Material C45 Steel Other

Brand Name:Daway

Model Number:ASTM 631 UNS S17700 EN 1.4568

Place of Origin:China

17-7PH Cold Work Hardened Stainless Steel Strip In Coil AMS 5528 17-7PH, 631 is a precipitation hardening, austenitic stainless steel of the 17Cr-7Ni PH type, with a high tempering effect and good structural stability. C Si Mn P S Cr Ni Al 0.08 0.5 0.9 0....

Brand Name:UST

Model Number:ASTM A2

Place of Origin:MAINLAND CHINA

... hardening chromium alloy tool steel that replaces O1 tool steel when safer hardening, less distortion and increased wear resistance are required. AISI type A2 steel is intermediate in wear resistance between O1 oil-hardening tool steel and D2 high-carbon,

Brand Name:VANFORGE

Place of Origin:China

...hardened gear steel round bar VANFORGE supply hot-worked alloy, carbon and carbon-boron steels in a variety of compositions and sizes. Hardenability The relative ability of a steel to harden under heat treatment becomes apparent in the degree to which the material hardens when quenched at different cooling rates. It is measured quantitatively, usually by noting the extent or depth of hardening...

Place of Origin:Jiangsu China(Mainland)

Brand Name:Bao Steel, Lisco

Model Number:201,1Cr17Mn6Ni5N, EN1.4372, SUS201

..., GB Description: Type 201 stainless steel (UNS S 20100) is a low nickel, high-work hardening, austenitic chromium-nickel-manganese stainless steel that was developed to conserve nickel. It’s one of the nickel steels. Ni is replaced by Mn in this steel.

Brand Name:HNJBL

Model Number:H13

Place of Origin:China

...Work Die Mold Steel Plate Description (5) The advantage of repair welding is that the preheating and post-heating temperatures are lower than those of SKD11, so repair welding is easier. Features: General cold-work dies steel, high hardness, and high toughness. (4) Advantages in surface hardening treatment, the surface hardness after surface hardening...

Brand Name:INWAY

Model Number:INW-307

Place of Origin:CHINA

...Hardened Steel Bushings INW-307 , Hardened Sleeve Bushings Technical Data: Specific load capacity static≤ 250 [N/mm2] Specific load capacity dynamic≤ 150 [N/mm2] Sliding speed≤ 0.6 [m/s] Friction value0.05 [µ] to 0,25 [µ] Temperature strain- 100 [°C] to + 250 [°C] Max. PV-value1.2 [N/mm² x m/s] 58-62 HRC INW-304 hardened steel bushings which Steel...

Brand Name:TOPONE

Model Number:EN 1.4310 1.4301 1.4401

Place of Origin:China

...304HC 316L​ Soft Stainless Steel Cold Heading Wire High Machi­nability Work Hardening What is stainless steel cold heading wire? Stainless steel wire is often used for the manufacture of screws, rivets, bolts and nails the wire is used cold in order to form...

Brand Name:TSINGSHAN

Model Number:321 1.4541

Place of Origin:China

...Steel Sheet AISI321 DIN1.4541 Delivery State Work Hardened Bright Surface Cut Edge Material Grade 304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202 Standard JIS/JIS/SUS/GB/DIN/ASTM/AISI/EN Surface Polishing,annealing,pickling,bright Technique Cold Rolled; Hot Rolled Size 1)stainless steel round pipe/tube: Wall thickness:1mm-150mm Outer diameter:6mm-2500mm 2)stainless steel...

Brand Name:Xin Yan hardware

Model Number:washer

Place of Origin:China

...factory, the samples will be ready in 5-10 working days; If the mould is not existing, we need to open a new mould, the samples will be ready in 10-15 working days; The samples will be sent to you via and arrive in 3-5 working days. You can use your own

Brand Name:Guangda

Place of Origin:China

Model Number:AISI H11

...Work Tool Steel Manufacturer For Hot Working Mold Steel H11 steel is one of the three most commonly used hot work die steel, the carbide in the steel is small, uniform distribution.Good cold and hot fatigue resistance and corrosion resistance, good hot and cold workability, good hardenability. In the medium temperature has a thick thermal strength, oxidation resistance, high toughness and wear resistance. Tool Steel...

Brand Name:PEGO GROUP

Model Number:PG-STP

Place of Origin:China

... with a apex angle of 40°. The tip should be rounded with radius of 0.25 mm ± 0.02 mm. The hardened steel pin should work with abration reistance tester. When performing the scratch test, scratches were performed at a speed of 20 mm/s ± 5 mm/s in a

Brand Name:BLM-1H-1

Place of Origin:Jiangsu, China (Mainland)

...Hardening Steel 17-7PH/631 Stainless Steel Nickel Alloy Cold Drawn Bar 1 . Descriptions: 17-7 PH stainless steel is a precipitation hardened stainless steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, good formability, and minimum distortion upon heat treatment. In high-heat treated conditions, 17-7PH stainless steel...

Brand Name:WHB

Model Number:JDB

Place of Origin:CHINA

...produced by carbon steel with oil groove,the initial grease given can be deposited the mass lubrication for long time working.The work surface can been sprayed a special solid lubricant,this solid lubricant can be transfer to the mating material during the

Brand Name:HY

Place of Origin:China

...Advanced inspection apparatus 5. Condition: Chrome plated, Quenched / Tempered, Induction hardened, Q / T Induction hardened 6. Case depth:1.5mm - 2.5mm Induction hardness: HRC50 - 60 Detailed Description 1.CHEMICAL COMPOSITION Material C% Mn% Si% S% P% V%

Brand Name:KY

Place of Origin:Jiyuan, China (Mainland)

Precision Machining Forged Steel Spiral Rod , Hardened Steel Shaft Description: We can produce 24 different kinds of sizes spiral rods. It is a shaft which can power to work and often be applied to Machinery; Power; Energy ect. Process:Forging – ...