Beaker

Brand Name:Sinuo

Model Number:SN9928

Place of Origin:China

Thermostat Life Test Bench Device For Lamp Temperature Measure With PLC IEC 60598-1 Applied Standards: The tester is designed and manufactured according to the standard requirements of Conform to IEC 60598-1 clause 12.7.2. Features: Thermostat life testing...

Brand Name:Sinuo

Model Number:SN2121

Place of Origin:China

IEC 60884-1 Clause 23.4 Power Cord Flexing Test Equipment For Plugs And Sockets Testing Product Information: The power cord flexing test apparatus meets the requirements of IEC 60884-1:2022 figure 21 clause 23.4, which is used to process the flexing test...

Brand Name:Sinuo

Model Number:SN441-2000L

Place of Origin:China

IEC 60529 Fig 2 IP5X And IP6X Sand And Dust Test Chamber 2000L PLC Control Product information: The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and ...

Brand Name:Sinuo

Model Number:SNQC1008A

Place of Origin:China

IEC 60068-2-75 Mechanical Strength Test Pendulum Impact Test Apparatus For EV Charging Piles​ Product Information: Comply with standard EN IEC 61851-1-2019, 12.11 /IEC 61851-1-2017 clause 12.11, IEC60068-2-75:1997, IEC62262:2002, etc. For the mechanical ...

Brand Name:Sinuo

Model Number:SN771

Place of Origin:China

UL94 Horizontal Vertical Flame Chamber with power 50W 500W Flammability Test Equipment Product Information: Standard: IEC60695-11-10, IEC60695-11-20, UL94, IEC60695-11-2, IEC60695-11-3, IEC60695-11-4. Application:It is required by IEC 62368-1:2018 Annex...

Brand Name:Sinuo

Model Number:SN557B

Place of Origin:China

UL 2054 Clause 22 Battery Fire Exposure Test Apparatus PLC Control Overview: This apparatus conforms to UL2054 Clause 22 FIG. 22.1, UL 1642-2009 Clause 20 FIG. 20.1, GB 31241-2014 Article 7.9 FIG. E.2. Technical Parameters: 1 Sample limits This test ...

Brand Name:Sinuo

Model Number:SN882

Place of Origin:China

UV Weathering Test Chamber Ultraviolet Light Accelerated Aging Environmental Test Chamber Standards & Clauses: ASTMG53-77, GB, GJB, MIL, ASTM, CNS, IEC, JIS, AATCC, DIN, Fed Test, BS, SAE and etc. Samples and Restrictions: Coating, ink, paint, resin, ...

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment System introduction: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it ...

Brand Name:Sinuo

Model Number:SN881-225L

Place of Origin:China

IEC 60068 225L Programmable Temperature and Humidity Climatic Chamber Equipment Overview: This temperature and humidity chamber is required by various of standards, such as IEC60335-1 clause 15, IEC60598-1 clause 4.9, etc. This test chamber is used for ...

Brand Name:Sinuo

Model Number:SN1104

Place of Origin:China

IEC60950 1.2/50 μS Impulse Voltages Generator 2 Internal Resistances Product information: This impulse voltage test generator is required by IEC60335-1:2004, IEC60950-1:2005,IEC60065:2005,GB4706.1and etc. The equipment is used to verify transient ...

Brand Name:Sinuo

Model Number:SN1104

Place of Origin:China

What is the impulse voltage generator? How is impulse voltage generated? Brief Introduction: The impulse voltage generator comforms to the standards as follow. IEC60335-1:2016 clause 14. IEC60950-1:2013 clause1.5.7.2, 1.5.7.3,2.10.3.9,6.2.2.1,7.4.2,7.4.3,...

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

IEC 60065 Clause 5.1 Label Marking Abrasion Test Equipment Product information: This label marking abrasion test equipment is designed and manufactured according to the standard requirements of IEC 60065:2014 clause 5.1, IEC 60335-1 clause 7.14, IEC 60950:...

Brand Name:Sinuo

Model Number:SNQC1008

Place of Origin:China

Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1 Product Introduction For Accessories Mechanical Strength Impact Test Apparatus: The test equipment is designed and manufactured according to IEC60309-1: 2012 clause 24.2 and ...

Brand Name:Sinuo

Model Number:SN5514

Place of Origin:China

Battery Small Parts Cylinder Tester ISO 8124-1 For Inspection Of Small Cells And Batteries Product information: The Battery Small Parts Test Cylinder is a stainless-steel measuring device designed to assess whether batteries and similar components may ...

Brand Name:Sinuo

Model Number:SN1151A

Place of Origin:China

UL 964-2000 Mattress Pads Voltage Dielectric Strength Testing Equipment Product Overview This specialized testing equipment is designed for performing high voltage dielectric strength testing on mattress pads, electric blankets, and similar flexible ...

Brand Name:Sinuo

Place of Origin:China

Model Number:SN2119-6

IEC 60884-1 6-Station Socket Temperature Rise Test Equipment For Household Plug & Socket Test The Plug & Socket Temperature Rise Tester is a high-precision, PLC-controlled testing solution engineered to evaluate the thermal performance of household ...

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

IEC 600950 Integrated 1.2 /50 µs and 10/700 μs Impulse Voltage Test Generator Product information: Standard: Conforms to IEC60065:2014 clause 10.2, 13.3.4 a), and IEC 60065:2014 clause 13.3.4 b), 14.2, IEC 60950-1:2013 clause 2.10.3.9, reference 2 & ...

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

IEC 62368-1 Clause 5.4.2, 5.5.8, Annex D Circuit 3 of Table D.1 Surge Test Generator 10KV Product Information: This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:...

Model Number:SN-ANHMS-1000

Brand Name:Sinuo

Place of Origin:China

Modular Lithium Battery Helium Mass Spectrometer Leak Detector This equipment is the first-generation ANHMS-1000 series modular helium mass spectrometer leak detector. It is compatible with both vacuum and suction gun testing methods. Its compact size ...

Model Number:SN2805

Place of Origin:China

Brand Name:Sinuo

IEC60238 Cl. 16.4 Figure 6 Lampholders Mechanical Strength Torque Test Apparatus Developed per IEC 60238:2016+A1:2017+A2:2020 Clauses 16.2, 16.4 and Figure 6, this torque testing equipment verifies the mechanical performance and service life of lamp ...