Belt Chains

Brand Name:Endress Hauser

Model Number:CUS51D-AAD1A3

Place of Origin:Germany

Endress Hauser Suspended solids sensor Turbimax E+H Germany CUS51D-AAD1A3 Description: Product name : Turbimax CUS51D Order code : CUS51D-AAD1A3 AA-Approval:Non-hazardous area AD1-Application/Measuring Range:Process water; solids A-Adaption Cable:Fixed ...

Brand Name:ABB

Model Number:NKTT01

NKTT01 Termination Cable 10 ft For ABB NKTT01 Termination Cable 10 ft For ABB Quote Only: No Stocked At (Warehouses): Wickliffe, Ohio, United States Technical Information: COMP DATA OEM ABA00054-10 Additional Information ABB Type Designation: NKTT01 ...

Brand Name:E+H

Model Number:FTM50-AGG2K4A32AD

Place of Origin:GERMANY

Endress Hauser Vibronic Point level detection Soliphant FTM50 Robust point level switch for fine-grained bulk solids also for hazardous areas Measuring principle Vibration Solids Characteristic / Application Compact point level switch for fine grained ...

Brand Name:BENTLY NEVADA

Model Number:84661-34

Place of Origin:USA

The Bently Nevada 84661-34 Velomitor Interconnect Cable is a high-performance, shielded cable designed for connecting Velomitor vibration sensors to vibration monitoring systems. It is engineered for use in harsh industrial environments where reliable ...

Brand Name:BENTLY NEVADA

Model Number:21504-000-012-10-02

Place of Origin:USA

Product Introduction The Bently Nevada 21504-000-012-10-02 7200 8mm Standard Mount Probe is a precision proximity sensor designed for critical machinery monitoring in industrial environments. This double probe offers dual measurement capabilities, ...

Brand Name:ABB

Model Number:V18345-2011265001

Place of Origin:GERMANY

Compact, well-proven, and flexible — High air capacity — Diagnostics capability — Resistant to overpressure — Robust and environmentally ruggedized — Easy to commission — Approvals for explosion protection • ATEX • IECEx • cFMus • EAC TR-CU-012 — Global ...

Brand Name:BENTLY NEVADA

Model Number:200200 dual-input ProTIM-R

Place of Origin:USA

Description The 200200 dual-input ProTIM-R (DIN rail mount) provides 2 channels of measurement. All acceleration-to-velocity (A-V) channels condition the signal from an accelerometer and integrate it to velocity units. The low frequency A-V channels are ...

Brand Name:Sany, Zoomlion

Model Number:200/230/260

Place of Origin:China

Spectable Wear Plate DN200/230/260 For Concrete Pump ZOOMLION Sany The role of Wear Plate & Cutting Rings: 1.The aggregate between the cutting ring and the eye plate of the concrete pump truck has a cutting effect, so as to ensure the correct place between...

Brand Name:Lieman

Place of Origin:CHINA

Double Layer Alloy Elbow Pipe For Putzmeister Zoomlion Schwing Brand Concrete Truck Pumps Trailer Pumps Wear-resitance, long-using life can reach 60,000CBM Packing & Delivery Company Profile Our Clients Certifications CE, ISO Our Advantages:

Brand Name:Lieman

Place of Origin:CHINA

Concrete Pipeline Twin-Wall Lengthened Pipe Elbow Pipe For Concrete Pump Doule Elbow Pipe 90 Degree 1. Our concrete pump pipes are available in a variety of sizes to accommodate different pipe diameters, making them suitable for different construction ...

Brand Name:Lieman

Place of Origin:CHINA

PM DN125 two layer concrete pump pipe elbow for boom truck Product Details: 1. Our elbow products series mainly including carbon steel elbows, high wear resistant elbows and other material upon your request. 2. The surface treatment: baking paint, two time...

Brand Name:Sany, Zoomlion

Place of Origin:China

Zoomlion Concrete Pump Seal Kit Abrasion Resistant For Upper Housing Seals 1.Concrete Pump Seal has excellent corrosion resistance, and the rubber seal can withstand the effects of acids, alkalis and other chemicals in the concrete. 2. It can maintain ...

Place of Origin:China

Product Description Concrete pump pipe Concrete pump pipe specifications: 1. Material: ST52, 45Mn2, Q235,20#,37Mn5 etc. 2. Sizes: DN125-DN180 3. Length: 1m, 2m, 3m, 4m or according to clients' requirements 4. Packing: With waterproof plastic film and ...

Brand Name:Pego Tester

Model Number:PG-IPX34S

Place of Origin:China

IPX3 and IPX4 Hand - Held Spray Nozzle Splashproof and Sprayproof Envornment Test Equipment Introduction: Water spray nozzle is strictly designed according to the requirements of IPX3 and IPX4 code of GB4208 and IEC60529 standard. It’s used to test the ...

Brand Name:Pego

Model Number:PG-IPX34S

Place of Origin:China

IEC60598 Hand-Held Device IP Testing Equipment Spray Nozzle for IPX3 and IPX4 Introduction: Water spray nozzle is strictly designed according to the requirements of IPX3 and IPX4 code of GB4208 and IEC60529 standard. It’s used to test the waterproof ...

Brand Name:PEGO

Model Number:PG-TP18

Place of Origin:China

Test Probe 18 Small Finger Probe 36 months to 14 years Child Finger Probe Introduction of Small Chlid Finger Probe: It is designed according to IEC61032 figure 12, this probe is intended to simulate access to hazardous parts by children of more than 36 ...

Brand Name:PEGO

Model Number:E14

Place of Origin:China

Go Not Go Gauges for Lampholder E14 Plug Gauge and Contact Gauge 7006-25 7006-26 Go gauges for screw threads of E14 lampholders (figure number: 7006-25-7) Purpose: to check the minimum dimensions of the lampholder screw thread and dimension X shown on ...

Brand Name:PEGO

Model Number:E14

Place of Origin:China

IEC60238 Test Cap A and Test Cap B for Lampholders E14 with CNAS Certificate List of Lampholder Gauges: Figure number Description E14 BS EN60238 Figure 5 Test caps for lampholders E14 BS EN60238 Figure 11 Test Caps for Lampholders E14 BS EN60238 Figure 13 ...

Brand Name:PEGO

Model Number:E27

Place of Origin:China

IEC60061-3 Lamp Cap Gauge E27 Go Gauge No Go Gauge 7006-27B 7006-28A 7006-27C Go Gauge for E27 Caps on Finished Lamps (7006-27B-1) Purpose: to check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps shown on ...

Brand Name:PEGO

Model Number:G13

Place of Origin:China

IEC60061 - 3 G13 lamp Cap Gauge Go Gauge 7006 - 45 and No Go Gauge 7006 - 44 “Go” Gauge for Bi-pin Cap G13 on Finished Lamps (7006-45-4) Purpose: to check dimensions E max,, F min, F max, and the combined pin diameter and displacement of pin (including ...