Chain Belts

Brand Name:icebear

Model Number:22825

Place of Origin:China

Description: This fabric generally chooses soft and comfortable material, delicate touch, wear on the body not only warm, but also very comfortable. The materil is real water-proof and you even do not need to wash it during the whole winter. This style is ...

Brand Name:PEGO

Model Number:E14

Place of Origin:China

IEC60560-2 B15 and B22 Holder Torque Gauge for Torsion Resistance Testing 1. Introduction Meet the requirements of IEC60432-1 figure C.1 and IEC60560-2 figure 4. 2. Specification: Dimension B15 (mm) B22 (mm) Tolerance (mm) A 15.27 22.27 +0.03 B 19.0 19.0 ...

Brand Name:PEGO

Model Number:E14

Place of Origin:China

7006-27F / 7006-28B Go No Go Gauge for E17 Lamp Cap Gague Conforms to IEC60061-3 Introduction: E14 lamp cap and lampholder gauges are designed according to IEC60061-3:2004, they are applied to quality test of E14 cap. The structure and waveform are ...

Brand Name:PEGO GROUP

Model Number:PG-GNG

Place of Origin:China

IEC60061-3 Rustless Go Not Go Gauges for Lampholders and Lamp Caps G5 / G13 / 2G11 with CNAS Certificate Model Description Figure number G5 "Go"and "Not Go" gauge for unmounted bi-pin cap (Not for use on finished lamps) G5 7006-46-3 &...

Brand Name:Pego Electronics

Model Number:PG-CRT

Place of Origin:China

IEC60884-1 Figure 20 Apparatus For Cord Retention Testing 1. Introduction Cord retention testing apparatus is designed according to the IEC60884-1 clause 23.2 figure 20. It is used to check the effectiveness of the retention of the cable by the cord ...

Brand Name:Pego

Model Number:PG-NSP

Place of Origin:China

Appliance Couplers Testing Equipment IEC60320-1 Non-solid Pin Tester with Diameter 4.8mm Rod 1. Introduction The non-solid pin tester is designed according to IEC60320-1 figure 2. It is applied to check the mechanical strength of non-solid pins of ...

Brand Name:PEGO GROUP

Model Number:PG338

Place of Origin:China

Digital Torque Meter for Lamp Cap Testing The Digital Torque Meter is engineered to evaluate the mechanical strength of lamp caps in compliance with IEC60598-1 standards. This precision instrument securely clamps lamp caps and applies rotational force to ...

Brand Name:Pego Tester

Model Number:PG-DS12

Place of Origin:China

IEC60065 Electrical Safety Test Equipment Dielectric Strengt Test Instrument 1. Application: The equipment is designed according to IEC60065 and UL1310, It’s mainly used for testing thin-layer insulation material electric strength. Stand part of the test ...

Brand Name:PEGO

Model Number:PG-TPB

Place of Origin:China

IEC61032 Test Finger Probe Test Probe B Jointed Test Finger 10N Force 1. Introduction of Test Probe B: The test probe is is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2. The jointed test finger...

Brand Name:PEGO

Model Number:IK-SH07

Place of Origin:China

IEC62262 2J Single Spring Hammer with 500g Equivalent Mass for IK07 Impact Test 1. Introduction The spring hammer consists of three principal parts: the body, the striking element and the release system. It’s designed according to IEC60068-2-75, IEC62262, ...

Brand Name:PEGO GROUP

Model Number:PG-IK

Place of Origin:China

IEC62262 Mechanical Impact Protection IK rating Tester from IK01 to IK10 1. Introduction Mechanical impact (IK) coding, or international mechanical protection, is the degree of protection an enclosure provides against harmful external mechanical impacts...

Brand Name:PEGO

Model Number:PG-STP

Place of Origin:China

IEC60335-2-11 Surface Temperature Measuring Probe for Tumble Dryers 1. Introduction The probe for measuring surface temperature is designed according to the requirement of IEC60335-2-11 figure 101 and IEC6335-2-6. It’s mainly used to test the temperature ...

Brand Name:PEGO

Model Number:IK-SH04

Place of Origin:China

IEC62262 Single Operated 0.2J / IK02 Mechanical Impact Spring Hammer 1. Introduction This spring hammer can meet the requirement of IEC60068-2-75 and IEC62262, the impact energy is 0.2J and IK test level is IK02. It is consists of three principal par...

Brand Name:PEGO GROUP

Model Number:PG-TPA/B/C/D/1/2

Place of Origin:China

IEC60529 IP Code Probe for IP1X / IP2X / IP3X / IP4X 1. Introduction of IP Code Probes: IP code probe is a test probe to verify the degrees of protection specified in IEC60529.Test probe A for IP1X test is intended to verify the protection of persons aga...

Brand Name:PEGO Group

Model Number:PG-PD10A

Place of Origin:China

Test Eha: IK01 to IK10 Pendulum Hammer Impact Test Apparatus Swing Pipe Combines with Striking Elements 1. Introduction The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Eha and IEC62262 (equivalent EN62262), and can meet...

Brand Name:PEGO Group

Model Number:PG-IPX34AS

Place of Origin:China

IEC60529 spray nozzle testing equipment for IPX3 and IPX4 Testing, spray nozzle with Control Box 1. Introduction IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify...

Brand Name:PEGO Electronics

Model Number:PG-IPX34S

Place of Origin:China

IEC60529 Figure 5 Hand-Held Device (Spray Nozzle) to Verify Protection Against IPX3 Spraying and IPX4 Splashing Water 1. Introduction The spray nozzle hand-held device is designed according to IEC60529 figure 5, it is it is apply to verify the protection...

Brand Name:PEGO Electronics

Model Number:PG-IPX16BS

Place of Origin:China

Chamber-Type IEC60529 waterproof IP Testing Equipment for IPX1/2, IPX3/4 and IPX5/6 Testing 1. Function of the Comprehensive Test Chamber The chamber equipment integated with drip box for IPX1 and IPX2 testing, R600 oscillating tube for IPX3 and IPX4 ...

Brand Name:Pego Electronics

Model Number:PG-PD50

Place of Origin:China

IK01 (0.14J) to IK11 (50J) Pendulum Hammer Mechanical Impact Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirements of IEC60068-2-75 test Eha and IEC62262. The equipment consists of ...

Brand Name:Pego

Model Number:IK-SH04

Place of Origin:China

Impact Test Equipment IEC 60320-1 60068-2-75 IK04 Spring Hammer for Testing Appliance Inlets 1. Introduction 0.5J spring hammer applies for performing the impact test, to appliance inlets designed for surface-mounting and the insulating material shrouds...