Lab Drying Equipment

Brand Name:DAXIAN

Model Number:DX8416A

Place of Origin:China

1. Scope of application: It is suitable for torsional resistance test of torsional resistance of flexible cable with twist resistance for wind power generation system or similar system with rated voltage of 1.8/3kV or below in low temperature environment...

Brand Name:DAXIAN

Model Number:DX8428

Place of Origin:China

IEC62217 Insulator Multi Stress Testing Machine Rubber Test Equipment Lab Tester 1. Test sample: Two test insulators of the same design with a creepage distance between 500mm and 800mm, 2. Procedure: Conduct the test in a sealed, damp, and corrosion-...

Model Number:DX8315A

Brand Name:DAXIAN

Place of Origin:China

Laminated Glass Radiation Test Chamber EN ISO 12543-4 Model: DX8615A Standards: EN ISO 12543-4-2011 Introduction: This radiation test chamber is used to perform UV aging test of laminated glass materials, complies to the EN ISO 12543-4 standards. ...

Brand Name:DAXIAN

Model Number:DX8427

Place of Origin:China

Polymeric Materials High Voltage Tracking Index Leakage Current Plastic Test Machine IEC60587 Technical Description: This product is used in electrical products under the influence of moisture and impurity environment, between the different polarity of ...

Brand Name:DAXIAN

Model Number:DX8427

Place of Origin:China

IEC60587 Evaluation Of Electrical Insulating Materials, Tracking Testing Machine Manufacturer Technical Description: The mechanism of electrical impingement on the epoxy resin insulating material using a high voltage of 3.5 kV AC with a frequency of 50 Hz ...

Brand Name:DAXIAN

Model Number:DX8427

Place of Origin:China

ASTMD2303 HV Outdoor Insulation Laboratory Test For Tracking And Erosion Resistance IEC60587 Model: DX8427 Scope: These test methods cover the evaluation of the relative tracking and erosion resistance of insulating solids using the liquid-contaminant, ...

Brand Name:DAXIAN

Model Number:DX8427

Place of Origin:China

IEC60587 Tracking Erosion Machine Electric Mark Index Tester High Voltage Tracking Erosion Machine 1. Remark : Simulating works under the power frequency (VAC) (48 HZ---62HZ) or under the corresponding DC Voltage(VAC), the DC-AC high voltage tracking ...

Brand Name:Daxian

Model Number:DX8521

Place of Origin:China

Sulfur Dioxide (Hydrogen Sulfide) Test Chamber Standard: Sulfur dioxide corrosion test for metallic and other non-metallic organic coatings under normal condensation conditions. Safety protection device: Test chamber: overtemperature protection, overall ...

Brand Name:DAXIAN

Model Number:DX8388A

Place of Origin:China

ASTME 136-22 Fire Testing Equipment Non- Combustibility Tester Scope: It is mainly applicable to the test method to determine the combustion performance of building materials under specified conditions. It is applicable to test the combustion performance ...

Brand Name:DAXIAN

Model Number:DX8609

Place of Origin:China

*, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img, picture, video, canvas, svg {display: block; max-width: 100%; } input, button, textarea, ...

Brand Name:AI

Model Number:AIC-2809

Place of Origin:China

Product Description ASTM D2809 Cavitation Corrosion and Erosion-Corrosion Characteristics Tester The test method of the instrument is: use a standard aluminum automobile water pump to pump the sample, make it run for 100 hours under the conditions of 113...

Brand Name:AI

Model Number:AIC-701

Place of Origin:CHINA

Flame Propagation of Textiles and Films Apparatus Introduction This Flame Propagation Apparatus is mainly designed based on NFPA 701,which regulations fabrics and films flame propagation test method for fabrics.And it applies to curtains and drapes, ...

Brand Name:AI

Model Number:AOI

Place of Origin:CHINA

Introduction: This Minimum Oxygen Index Test Apparatus measures minimum oxygen concentration as necessary when specimen combustion. The oxygen sensor is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. The ...

Brand Name:OEM

Model Number:YSB-04

Place of Origin:Henan Province, China

Disposable Adult Full Body Heated Blanket Surgical Forced-air Warming Blanket For Adult Patient The preheating method of the forced-air warming blanket is to apply convective gas temperature on the surface, increase the patient's body surface temperature, ...

Brand Name:OEM

Model Number:5160302

Place of Origin:Henan, China

Disposable Surgical Forced-Air Upper-Body Warming Blanket For Operation Room The medical warming blanket has the characteristics of rapid heating, fast rewarming efficiency, simple operation, and high stability. It is mainly used for warming care of ...

Brand Name:OEM

Model Number:5160303

Place of Origin:Henan, China

Medical Patient Warming System Prevent Hypothermia Medical Heating Blanket The temperature of the medical warming blanket can be freely controlled, and the heating time can also be adjusted at any time according to the needs of the operation. The surface...

Place of Origin:CN

Brand Name:NA

Products Name : SHOMEA Bent Dispensing Needle with Side-Hole Material: Stainless Steel, Brass, Aluminum, brass, copper ,etc Surface treatment : Sandblasting, polishing, knurling, laser marking, etc Tube Outer Diameter : 0.25-15mm Tube wall Thickness : 0.05...

Place of Origin:CN

Brand Name:NA

Products Name : SHOMEA Professional Wine Preservation Needle with Pencil-tip Material: Stainless Steel, Brass, Aluminum, brass, copper ,etc Surface treatment : Sandblasting, polishing, knurling, laser marking, etc Tube Outer Diameter : 0.25-15mm Tube wall ...

Place of Origin:CN

Brand Name:NA

Products Name : SHOMEA Customized Small Diameter Stainless Steel Reducer Tube Material: Stainless Steel, Brass, Aluminum, brass, copper ,etc Surface treatment : Sandblasting, polishing, knurling, laser marking, etc Tube Outer Diameter : 0.25-15mm Tube wall...

Place of Origin:CN

Brand Name:NA

Products Name : SHOMEA Customized Dental Composite Protective Cap Material: Stainless Steel, Brass, Aluminum, brass, copper ,etc Surface treatment : Sandblasting, polishing, knurling, laser marking, etc Tube Outer Diameter : 0.25-15mm Tube wall Thickness...