Other Electrical Equipment

Brand Name:AI

Model Number:SIT

Place of Origin:China

SIT-M Manual Book.pdf Introduction: This Ignitability Test Apparatus is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials...

Brand Name:AI

Model Number:CHT

Place of Origin:China

Contact Heat Transmission Test Instrument Catalogs for EN 373&348&6942&367&702.pdf INTRODUCTION Contact Heat Transmission Test Instrument is applicable to protective clothing (including hand protectors) or its constituent materials intended to protect aga...

Brand Name:AI

Model Number:AIC-4108

Place of Origin:CHINA

Thermal Protective Performance Test Equipment Products This Thermal Protective Performance Test Equipment is suitable for textiles and garments, petroleum chemical industry, labor protection and quality supervision, inspection and other industries or ...

Brand Name:AI

Model Number:CHT-T

Place of Origin:CHINA

Protective Clothing Contact Heat Transmission Test Equipment Introduction: This contact heat transmission test Equipment is designed according to ISO12127-2007 and EN702. The tester uses the heating cylinder to provide a constant temperature in contact wit...

Brand Name:AI

Model Number:AIC-6942

Place of Origin:CHINA

EN 366 Protection Against Radiant Heat Test Equipment Introduction: This Protection Against Radiant Heat Test Equipment is designed according to ISO6942 and EN366 . The test equipment has a user-friendly, intuitive, Windows-based application that provides...

Brand Name:AI

Model Number:SBI

Place of Origin:CHINA

Single Burning Item SBI Fire Testing System EN13823 SBI.pdf INTRODUCTION The Single Burning Item (SBI), is a method of test for determining the reaction to fire behavior of building products (excluding floorings) when exposed to the thermal attack by a ...

Brand Name:AI

Model Number:SIT

Place of Origin:CHINA

Single Flame Source Test (Ignitability Apparatus) Introduction Small Flame Ignition Tester is designed in accordance with DIN 53438 & ISO 11925-2:Testing of combustible materials; response to ignition by a small flame, with surface ignition and edge ...

Brand Name:AI

Model Number:FPT

Place of Origin:CHINA

BS 476-6 Fire Propagation Index Tester INTRODUCTION BS 476 part 6 specifies a method of test, the result being expressed as a fire propagation index, that provides a comparative measure of the contribution to the growth of fire made by an essentially flat ...

Brand Name:AI

Model Number:PSS

Place of Origin:CHINA

BS-476-7 Surface Spread Flame Tester Introduction BS 476 Part 7 specifies a method of test for measuring the lateral spread of flame along the surface of the specimen of a product orientated in the vertical position under opposed flow conditions, and a ...

Brand Name:AI

Model Number:SFT

Place of Origin:CHINA

IMO Spread of Flame Apparatus ISO 5658-2 Introduction Spread of flame tester is used to evaluate combustion characteristics of rail materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at ...

Brand Name:AI

Model Number:UL-94T

Place of Origin:CHINA

Horizontal and Vertical Flammability Apparatus Introduction: Horizontal and Vertical Flammability Apparatus is designed according to plastic Materials flammability test method. It is used to test flammability, burning rate, flame spread, burning flame ...

Brand Name:AI

Model Number:AIC-4108

Place of Origin:CHINA

Thermal Protective Performance Tester by Open-flame Method Products This Thermal Protective Performance Tester is suitable for textiles and garments, petroleum chemical industry, labor protection and quality supervision, inspection and other industries or ...

Brand Name:AI

Model Number:NFT

Place of Origin:CHINA

Needle Flame Test Instrument by IEC60695-2-2 Introduction Needle Flame Test Instrument is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household ...

Brand Name:AI

Model Number:SBI

Place of Origin:CHINA

Single Burning Item Test System EN13823 SBI.pdf Introduction The Single Burning Item (SBI) test is a method of test for determining the reaction to fire behavior of building products (excluding floorings) when exposed to the thermal attack by a single ...

Brand Name:AI

Model Number:STF

Place of Origin:CHINA

Steiner Tunnel Combustion Chamber Stucture 1. The Steiner Tunnel Combustion Chamber is made of stainless steel .The internal dimensions of the combustion chamber is 305mm x 451mm and long 7.6m with firebricks laying which has satisfactory insulation ...

Brand Name:AI

Model Number:FRP-T

Place of Origin:CHINA

Radiant Flooring Panel Apparatus by EN ISO 9239-1, ASTM E648 ISO9239 FRPT.pdf Standards: ISO 9239-1: Flooring fire reaction test - Part 1: Combustion performance of flooring materials tested by radiant heat ASTM E 648: Critical Radiant Flux of Floor ...

Brand Name:AI

Model Number:VW-N

Place of Origin:China

VW-1 Vertical Wire Flame Test Chamber Introduction This vertical fire rating test equipment (VW-1) is designed according to UL2556 9.4 FV-2/VW-1, ;to assess the flame spreading ability to combustible near by of cable or flexible wire when it caught fire...

Brand Name:AI

Model Number:SDB

Place of Origin:CHINA

NBS Smoke Density Test Chamber Introduction The Smoke Density Test Chamber has proved to be one of the most versatile fire testing instruments since its inception in the 1980s. It is the most widely accepted apparatus for the measurement of smoke from ...

Brand Name:AI

Model Number:FRP

Place of Origin:CHINA

Flooring Radiant Panel Test Equipment Introduction The ISO 9239 Radiant Flooring Panel test is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test equipment measures the spread of flame of the sample, under ...

Brand Name:AI

Model Number:TCCT

Place of Origin:CHINA

ISO 5660-1 & 2 Cone Calorimeter TCCT Cone Calorimeter.pdf Introduction: Heat release quantity is the core parameters to evaluate the fire behavior of materials and products.Our Cone Calorimeter can meet all existing standards (including ISO 5660, ASTM E ...