cnc lathe carbide turning insert CCMT09t304 Insertos CCMT CCMT060204 CCMT120408

Quick Detail:

• High strength edge
• Precision coating
• Durable
• Excellent performance
• Collapse resistance and wear resistance

Description:

• The CCMT carbide lathe insert is made of the innovative cemented carbide raw material which is common to steel and stainless steel, so that the blade has excellent performance of high toughness, high wear resistance and high temperature resistance; The blade surface adopts a new wear-resistant coating process, which has good oxidation resistance, and is more resistant to high temperature and more durable; The cutting band of the edge gradually widens, and the edge strength gradually increases. 2. The cutting edge front angle gradually decreases from large to small, and the edge strength gradually increases. When the machining allowance is small, select the blade with small tolerance groove, and when the machining allowance is large, select the groove with large tolerance space.

Specifications:​

Lead Time:

Notice:

• The carbide lathe insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide lathe insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide lathe insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the tungsten carbide lathe insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide lathe insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: