Insertos Para Tornos TNMG 160404 Carbide lathe insert For Steel

Quick Detail:

• High gloss wear-resistant
• Sharp cutting
• Smooth chip breaking
• Not easy to stick knife
• thermal shock

Description:

• Tnmg160404-HQ BP020 is a carbide lathe insert with CVD yellow coating on the surface. The surface coating of Balchals has high hardness, combined impact toughness and wear resistance, stable performance and long service life; The cutting edge is grinded and polished, and the sharpness is still under the 50 times microscope. The more professional groove design, even and smooth chip breaking, improves the processing efficiency; Double-sided sharp hexagon can be used. Different R angles can meet your needs for fine turning and rough turning, and reduce cutting resistance to achieve sharp cutting. It is the best choice for processing mild steel.

Specifications:​

Lead Time:

Notice:

• The carbide lathe inserts shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide lathe insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide blade is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the tungsten carbide inserts is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: