Tnmg 220404 220408 2204 220412 Triangle Tungsten Turning Carbide Inserts CNC Cutter Tool

Quick Detail:

• Good toughness
• Good heat resistance
• Sharp blade
• Fine cutting
• high efficiency
• High bending strength

Description:

• Humanized design, realizing multiple uses of one knife and reducing the variety of turning carbide inserts
• Good groove structure to control chip flow and curl
• Unique structural design reduces cutting resistance and vibration
• Precision grooving, suitable for precision grooving of low carbon steel, stainless steel, viscous materials and non-ferrous metals

Lead Time:

Notice:

• The turning carbide inserts shall not be collided or dropped on the ground and must be handled with care.
• Before installing the turning carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the turning carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the turning carbide inserts rotates eccentrically.
• When using, do not exceed the specified high speed
• When the turning carbide inserts are not used, hang the blade vertically on the dry shelf.

Applications:

Our turning carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: