TungstenTurning Carbide Insert Rcgt 1003 10t3 1204 Mo Aluminum Cutting Tool 0803

Quick Detail:

• General groove type
• Good chip removal performance
• Low cutting resistance
• Strong impact resistance
• High finish
• Long service life
• Excellent performance

Description:

• The turning carbide inserts are sintered from tungsten carbide and cobalt powder. The base material with strong deformation resistance and carbide with special crystal structure enable the tool to have high hardness, good toughness and high temperature resistance, making the wear resistance of the rear face of the tool stronger; Gradient sintering technology is adopted to enhance the impact and wear resistance of the cutting edge, thereby improving the quality of the processed products; Single side cutting edge design, positive angle blade, precision polishing of blade cutting groove, effectively reduce blade wear, improve the roughness of processed products, and extend the service life of the blade.

Specifications:​

Lead Time:

Notice:

• The turning carbide inserts shall not be collided or dropped on the ground and must be handled with care.
• Before installing the turning carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the turning carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the turning carbide inserts are not used, hang the blade vertically on the dry shelf.

Applications:

Our turning carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: