button control glow wire flammability tester

Brand Name:HongCe

Model Number:GW-1

Place of Origin:China

Glow Wire Flammability Tester for IEC Fire Hazard Simulation | High-Temperature Ignition & Material Safety Compliance Testing Equipment Products Introduction Glow Wire Flammability Tester from HongCe, a trusted original manufacturer in China, is engineered to simulate fire hazards caused by overheated or glowing...

Brand Name:Haida

Model Number:6001-HD

Place of Origin:China

Glow-Wire Test Instrument Product Description In fault or overload conditions, components or parts may reach excessive temperatures or ignite nearby components. The glow-wire test simulates the thermal stress caused by a glowing element, overloaded ...

Brand Name:HJ

Model Number:GW-1

Place of Origin:China

...Flammability Testing Equipment Glowing/Hot-Wire Tester With Button Operation Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products; IEC60695-2-12 Fire hazard testing – Part 2-12: Glowing/hot-wire...

Brand Name:YUYANG

Model Number:YY313

Place of Origin:China

...Using electricity heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or hold burning time ,also test light-off

Brand Name:GOLD

Model Number:GD-IEC 60695-2-10

Place of Origin:CHINA

...technical specifications of the "glow wire test method" in IEC60695-2-10, GB/T5169.10, GB/T5169.13 and GB4706.1 standards. It is specially used to ...

Place of Origin:China

Brand Name:KeRang

Glow Wire Tester GW-1 Parameters: ParametersModel GW-1 GW-2(Touch screen) Working voltage 220V/50Hz 220V/50Hz Control operation mode Electrical control, button operation PLC control, 7 inch color touch screen operation, with infrared remote control Glowing filament Ф4mm ± 0.04mm (> 77 % Ni/20 ± 1 % Cr) special standard ring shape,horizontal standing Specimen pressure on glowing...

Brand Name:SKYLINE

Model Number:SL-SE04

Place of Origin:China

...Glow Wire Flammability Temperature Tester, Glow Wire Combustion Resistance Testing Machine, Glow Wire Burning T Digital Electronic Testing Equipment Glow Wire Tester Product description This instrument is designed and manufactured according to the requirements of "Glowing Wire...

Model Number:FGW

fire resistance test,glow wire tester,glow wire ignition tester Glow Wire Tester is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a ...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

...Glow Wire Flammability And Temperature Test Apparatus With PLC Control Product overview For Glow Wire Flammability And Temperature Test Apparatus: This device is manufactured according to the standard of IEC60695-2-10, IEC 60695-2-11, IEC 60695-2-12, IEC60695-2-13, UL746A, IEC 60335, IEC 60598, etc. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing...

Brand Name:AISRY

Model Number:ASR-5660B

Place of Origin:China

Flame Retardant Test Machine Glow Wire Tester For Electronics Product Introduction: Glow wire tester is used for electrician, its components, parts, solid electrical insulation materials or other solid combustible materials, in line with GB/T5169.10~13, ...

Place of Origin:China

Brand Name:GC

Model Number:GC-ZRS-C

Glow Wire Flame Test Chamber With Manual Control Product Description This testing machine is mainly used to simulate the thermal stress caused by heat sources or ignition sources such as hot components or overloaded resistors in a short time under fault...

Brand Name:HTI

Model Number:HTE-007A

Place of Origin:Guangdong,China(Mainland)

...wire test apparatus and general test program and GB5169.10, UL 746 a, IEC829 VDE0471 standards such as use of no flame light-off source program simulation test project. Glow wire tester would stipulate Ni80 / Cr20) material and shape of the heating wire in

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

...-2-12, IEC60695-2-13, it is required by IEC 60598 Clause 13.3.2., UL746A, etc. Equipment Overview The SN772 Glow Wire Test Apparatus is a specialized testing instrument designed to simulate thermal stress caused by glowing components or ignition sources,

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

Glow Wire Tester Flammability Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, ...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:SHC

Model Number:SC-GWAC

Place of Origin:China

Glow Wire Thermocouple Flammability Testing Equipment Accessories 1.Flame height gauge Material: thickness of 1-1.5mm stainless steel, IEC606095-11-4 picture 2, IEC606095-11-3 picture 2. Deal board Copper block Platinum pole Flame height gauge Use deal board of 20cm*20cm for glow wire testing Horizontal-vertical tester, needle flame tester...

Brand Name:TESTEX

Model Number:TF346

Place of Origin:China

Glow Wire Tester With Touch Screen And Temp. Range From 500℃ To 1000℃ Application Glow Wire Tester, is to determine the fire hazard of electrical parts and components subjected to malfunctions such as overload, short circuit, poor connection, or oth...

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

...Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test project. Glow wire tester will specify the material (4Ni80 / Cr20) and the shape of the heating wire...

Brand Name:KINGPO

Place of Origin:Mainland China

...Glow Wire Test Equipment PLC Control With 7 Inch Touch Screen IEC60695 Glow Wire Test Equipment With PLC Control 7 Inch Touch Screen Flammability Tester PLC Glow Wire Test Equipment IEC60695 Product details: KingPo has upgraded the glow wire tester to be PLC control version, the new PLC touch screen glow wire...

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT01

Glow Wire Tester, IEC60695-2-10 Flammability Testing Equipment ,Glow-wire apparatus Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire...