iec 60884 1 force test device

Brand Name:Sinuo

Model Number:SN2120A

Place of Origin:China

... of plug and socket cable connections, especially focusing on the strain relief area. It fully complies with multiple international standards, including IEC 60884-1:2006 clause 23.2, IEC 60335-1 clause 25.15, and VDE 0620 table 18.

Brand Name:HongCe

Model Number:HC9921

Place of Origin:China

... and IEC60884-1fig22-26. It is used for the mechanical strength test of households and similar use of plug sockets, electrical accessories like switches and shrouds, etc. Standard of Impact Testing Equipment: IEC 60884-1: 2022 Plugs and socket-outlets for

Brand Name:JLX

Model Number:LX-LG36

Place of Origin:Made in China

IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain Lateral Strain Test Apparatus Product details: The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which rated ...

Brand Name:Pego Electronics

Model Number:PG-NSP

Place of Origin:China

... to check the mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported as shown in IEC60884-1 figure 14, for 1min in a direction perpendicular to the axis of the pin, by mean of a

Brand Name:Sinuo

Model Number:SNQC1013A

Place of Origin:China

...Force Test Device Complied Standards & Clauses for Charging Interface Insertion Force Test Device IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. Technical Parameters for Charging Interface Insertion Force Test Device Test...

Place of Origin:China

Brand Name:KeRang

... insulating materials such as: wire and cable sheathing, heat shrinkable tube, rubber test or PVC materials, and the insulating components, or use for drying, baking, heat treatment and so on Test sample: polymer materials, wire and cable sheathing,

Brand Name:KINGPO

Place of Origin:Mainland China

Adhesive Force Test Device for Hot Dip Galvanizing Coating Product details: This test device confirms to the standard of YDT757 drop hammer test way. It’s suitable for the adhesive force test of hot dip galvanizing coatings. During the test, the free ...

Brand Name:SHC

Model Number:SC-TR

Place of Origin:China

.... It is applicable to the temperature rising of electronic accessories in working position. Technical parameters: Item TR-1 TR-2 TR-3 Working station 6 6 6 Testing current 0-40A 0

Brand Name:HJ

Model Number:HC9918

Place of Origin:China

...Part 1: General requirements’ clause 23.2 Application: This device is used for testing the wear resistance ability of flexing cable with protective sheath of plug, portable socket-outlet, fixed accessories with conductor and connectors, not ...

Brand Name:kingpo

Model Number:KP-BCL03

Place of Origin:china

IEC 60884-1 Fig 18 and Fig 19 Verification Force Plug Socket Tester Apparatus Product details: This Tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force...

Brand Name:TONY

Model Number:HTE-006

Place of Origin:China

...Test Device with NM300-6, IEC60695-10-2, IEC 60884-1, IEC60320-1 standards Specificaitons: 1.0 Comply with the standards of NM300-6, IEC60695-10-2(2003), IEC 60884-1, IEC60320-1, IEC60335-1, IEC60598-1, IEC60950-1.；GB4943,GB2099. 2.0 Ball diameter: 5mm±0.05mm(Radius 2.5mm) 3.0 Ball pressure: 20N(including loading device and ball) 4.0 Test...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-14A

...Test Probe With 20N Force for socket protection Product Description IEC60884 Test Probe With 20N Force for socket protection BND-14A Technical Parameters: 1, Test Probe Length:80mm 2,Probe Diameter:1.0mm 3,Material:The handle is made of nylon, tip is made of hardened steel 4,Standard: IEC60884 ,IEC61032 Fig.10 1 Product Explanation The socket protection door test needle probe meets the standard requirements of IEC 60884...

Brand Name:LABTONE

Model Number:EV206

Place of Origin:Dongguang, China

... VG1000/50 VG2000/50 Frequency(Hz) 2-2500 2-3000 2-3000 2-2500 Max Exiting Force(kg.f) 300 600 1000 2000 Max. Displacement (mmp-p) 40 50.8 50.8 50.8 Max. Acceleration(g) 100 ...