iec test equipment experimental device

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to

Brand Name:HJ

Model Number:SH-7

Place of Origin:China

... B.1 Calibration device. Standard description: The spring hammer to be calibrated is put in the release base and is then operated three times by means of the release device; it shall not be released manually. For each operation, the striking element of the

Brand Name:KINGPO

Place of Origin:China

...IEC Test Equipment IEC60335 Kettle Insert Withdraw Endurance Test Device for Cordless Kettle Plug Kettle Insert-withdraw Endurance Test Device Product information: The kettle insert-withdraw endurance test device is designed and manufactured according to the standard IEC60335 -2- 15 which is used to test the cordless kettle plug life. Test principle and product feature: Test principle:The device...

Brand Name:SHC

Model Number:SC-FNR40

Place of Origin:China

...iec test equipment Abnormal Heat Resistant Insulating Sheath Test Device Figure40 IEC60884 Product details: This device meets the standards of IEC60884-1 figure 40. It is applicable to test improper heating resistance and burning resistance of bolt and plug with insulation sleeve. It can imitate the insulated parts of which the plug-and-socket device...

Brand Name:KingPo

Place of Origin:China

... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potential is connected with the ...

Place of Origin:China

Brand Name:ALLIED TESTING

Model Number:TP02

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:RISING

Model Number:RS2676

Place of Origin:China

RS2676 Insulation Resistance Test Equipment Digital Device Transformer Routine Test Product Description 1)Automatic timing function (maximum timing is 999S). The instrument buzzer buzzes briefly once per second, and emphatically once every 15 ...

Brand Name:PEGO

Model Number:PG-TP1

Place of Origin:China

Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is ...

Brand Name:Seals-ins

Model Number:YLA-XXXX-X

Place of Origin:Guangdong, China

High Efficiency Air Tightness Test Equipment Of Medical Device Buttons #detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#bbb;font-family:Roboto;font-size:24px;...

Brand Name:DAXIAN

Model Number:DX8427

Place of Origin:China

... of resistance to electric tracking and corrosion. Executive standard: - IEC 60587-2007 Technical parameter: Test time 6 hours Drip device igh precision peristaltic pump Number of experimental groups five groups Equipment structure the control panel is

Brand Name:Sinuo

Model Number:SN996

Place of Origin:China

IEC 60598-1 Luminaries Adjustment Test Equipment Lamp Adjustment Torsion Device Rotation Angle 360° Standard and Clause For Luminaries Adjustment Test Equipment: This lighting adjustment test equipment matches the requirements of clause 4.14.3 of IEC 60598-1, mainly used for the lamp adjustment device’s torsion, and bending test...

Brand Name:SKYLINE

Place of Origin:China

...Testing Equipment IEC 60598-2-21 Binding Appratus For Rope Light IEC 60598-2-21 21.7 Binding Apparatus for Rope Light Overview of equipment: The lamp twine rope winding test device is made to meet the test requirements of Chapter 6.14 of IEC 60598-2-20: 2002 and GB7000.9-2008 standards and the requirements of Figure 3. This device...

Brand Name:GAOXIN

Model Number:GX-4030

Place of Origin:Guangdong

... Materials for Parts in Devices and Appliance Test Equipment 1. Product Name: UL94 Vertical flammability test equipment 2. Test Standard: UL94, IEC 60335-1, IEC 60695-2-4,IEC 60695-11-10... Note: UL94 Flammability Test equipment can conform to but not ...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

...-2-12, IEC60695-2-13, it is required by IEC 60598 Clause 13.3.2., UL746A, etc. Equipment Overview The SN772 Glow Wire Test Apparatus is a specialized testing instrument designed to simulate thermal stress caused by glowing components or ignition sources,

Place of Origin:China

Brand Name:KeRang

... Test Equipment, Medical Device Testing Equipment, Waterproof Test Equipment, Dust Testing Equipment, Flammability Testing Equipment, Electric Testing Equipment, Impact Testing Machine and so on. Over the years, we focus on Laboratory Test Equipment,

Brand Name:HOOHA

Model Number:ZY6264 10MW

Place of Origin:China

... and components) and extensive fire resistance test verification for raw materials, buildings and physical models. Experimental principle: The most basic physical quantity of a large calorimeter is the heat release rate. When a fire, to measure don't

Brand Name:Haida

Model Number:HD-F778

Place of Origin:China

...used for furniture mass production of the early stage of r & d testing and later quality testing. 2.Main technicl parameters: 1.Applications: the machine suits for the standard which is EN 1022,EN1792,BIFMA X5.1,and EN581-2,and it is used to auto-test the

Brand Name:Btutest

Model Number:BTU-BIHTHP

Place of Origin:Made in China

...Hardness Tester High-Precision Paint Testing Equipment Standard: GB/T 9275 ISO 2815 Description: It performs an indentation test on the coating film under specified experimental conditions by an indentation device with a specific size and shape (a metal ...

Brand Name:LABTONE

Model Number:EV210

Place of Origin:CHINA

...Test Equipment Meets IEC 60068-2-6 ASTM D4728 ISTA Standard Product Description EV series of electromagnetic vibration testing system is specially designed to meet the need for long-time operation. Vertical and horizontal vibrations can be achieved by the installation of vibration resistant base. The standard platform is equipped with high-efficiency airbag shock isolation device...

Brand Name:Topfer

Model Number:Top-Smart 1100

Place of Origin:China

Test Equipment 1.7m IEC 62301 Automatic Power Supply Test System Equipment For PCB Features of the Top-Smart 1100 Power Testing System: Open: An open hardware platform that allows for the addition or removal of various testing devices based on customer requirements (including devices with GPIB, RS-232, USB, and other interfaces) An open software platform that can be expanded with new test items and functions according to customer testing...